Used Can Press for sale (27,639)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: 121446, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, bending force (max.): 110 t, working width: 3,600 mm, distance between stands: 3,100 mm, number of axes: 2, oil tank capacity: 120 l, power: 7.5 kW (10.20 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Darley Press Brake EHP 110 36/31 Press force: 110 tons Bending length: 3600 mm Bending length between uprights: 3100 mm Rapid approach speed: 100 mm/sec Working speed: 8 mm/sec Return speed: 65 mm/sec Stroke length: 150 mm Control: DELEM DA 22 Total power requirement: 7.5 kW Machine weight: approx. 10,100 kg Dimensions: approx. 3650 x 1290 x 2550 mm Equipment: - CNC-controlled axes Y1 - Y2, X - Electric backgauge (X-axis) Cjdpex A Ealsfx Abbehf - 2x manual backgauge stops - Wila hydraulic upper tool clamping - Side protection with electronic safety - Foot switch and hand switch Machine is still in use. Service has always been performed by SafanDarley Eijsden. Blades as shown in the photo included. v10-v24 lower dies If interested, you can inspect and test the machine on location.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm stroke: max. 355 mm weight: 7.200 Kg. Cedpfx Abswuutbjbehf

Condition: good (used), Year of construction: 1975, Veneer press Cedox Akuzspfx Abbehf - 3300 x 1350 mm - External dimensions: 4000 x 1650 x 2450 mm - Year of manufacture: 1975 - Approx. 5500 kg - Electrically heated platen, no dents - HP 120 - Press area height: 400 mm - 6 cylinders - Rack and pinion guide

Condition: used, Year of construction: 2006, Documented equipment / components: Year Equipment / Component 2006 Bead Apex machine with flipper – AFC1 2006 Bead Apex machine with flipper – AFC2 2011 Bead Apex flipper machine – AFC3 2012 Installation / commissioning AFC3 Csdpsxb Ukksfx Abbjhf Line setup: • AFC (Automatic Feeding & Control) • Conveyor line • Drum applier • Loop conveyor • Extruder Control system: Operator panels with visualization units

Condition: used, functionality: fully functional, Year of construction: 1995, machine/vehicle number: 95/230/004, control type: CNC control, actuation type: hydraulic, bending force (max.): 50 t, working width: 2,500 mm, stroke length: 2,002 mm, throat depth: 170 mm, number of axes: 3, table height: 1,030 mm, type of crowning: fixed, travel distance X-axis: 500 mm, total length: 3,100 mm, total width: 1,700 mm, total height: 2,350 mm, Equipment: emergency stop, foot remote control, lower tooling, safety light barrier, upper tooling, For Sale: Edward Pearson 60-Ton Press Brake £2750 We’re offering a well-maintained Edward Pearson press brake with a 60-ton capacity and a 2.5-meter bed. This machine comes complete with upper and lower tooling and is in good working condition. It’s been regularly serviced, ensuring reliability and performance. Can arrange video call to view if needed Reason for Sale: We’ve upgraded to a newer model, so we’re selling this reliable machine. Cedpfjxupyyjx Abbshf COST £2750

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: Z293-068, total height: 3,800 mm, total width: 4,000 mm, total length: 5,000 mm, table width: 1,500 mm, table length: 2,500 mm, RASTER ZEULENRODA GHP 400 H/K-08 Testing Press, Year of Manufacture 2004 TECHNICAL DATA & EQUIPMENT: Cedew Rggwjpfx Abbjhf Serial Number: Z293-068 Operating Voltage: 400 V Frequency: 50 Hz Control Voltage: 230 V Connection: 240 kW Rated Current: 100 A Hydraulic Pressure: 320 bar Rated Force: 2 x 2000 kN Table Dimensions: 2500 x 1500 mm Reach of Manufacturer Hilma’s Consoles: 1600 mm Including CNC control, cooling unit, and filtration/extraction system REFERENCE NUMBER 138 DIMENSIONS & WEIGHT: 5000 x 4000 x 3800 mm 32,000 kg COLLECTION NOTES: The item will be available from October 2025. The pick-up date must be coordinated for a specific day between 20.10.2025 and 31.10.2025. FCA: 59759 Arnsberg (DE), loaded onto truck

Condition: used, Year of construction: 1990, total length: 1,860 mm, total width: 940 mm, total height: 1,410 mm, Weight: 1.200 kg Press brake + sheet metal shear Combintation-Machine - Year: 1990 - Documentation available: No - CE certificate present: No Chodpfx Absxx Smdebsf - Drive system: Conventional - Power [kW]: 3.0 - Press force [ton]: 34 - Max. working width [mm]: 1300 - Column gap [mm]: 1450 - Throat depth [mm]: 100 - Backgauge depth [mm]: 600 - Crowning system: None - Punch holder: Standard - Tools included: Yes - Transport dimensions: 1860mm x 940mm x 1410mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 Csdpfx Ajxuhw Debbjhf 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Model – The Offshell Press MK V (Peeler). ✅ Serial numbers – TPR100/05/070 & TPR100/05/071. ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 31,792 h, Hydraulic Press Brake Manufacturer: TRUMPF Model: TrumaBend V320 Year of Manufacture: 1998 Technical Details Manufacturer: TRUMPF Model: TrumaBend V320 Year: 1998 Operating hours: 31,792 h (read-off value) Pressing force: 320 t Bending length: 4,080 mm Distance between uprights: 3,680 mm Throat depth: 410 mm Chjdpfjx Ar T Esx Abbef Approach speed: 150 mm/sec Return speed: 135 mm/sec Bending speed: 10 mm/sec Stroke: 365 mm Installation height: 535 mm Space requirement: approx. 4.65 x 2.31 x 3.1 m Weight: 24.5 t Equipment: • 2D graphic control Delem DA • Pneumatic die shifting • 2 movable support arms • Hydraulic tool clamping, top and bottom • CNC-controlled crowning • Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 • Upper tool OW 202/S, 28°/R1, H 220 mm, L = 4,000 mm, segmented • Lower tool EV006-W20, 30°/R2, H 100 mm, L = 4,000 mm, segmented All information subject to verification. A demonstration is possible at any time in our showroom.

Condition: reconditioned (used), functionality: fully functional, control type: manual, actuation type: hydraulic, working width: 60 mm, stroke length: 105 mm, throat depth: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table height: 970 mm, back gauge: 345 mm, overall weight: 2,800 kg, total length: 1,420 mm, total width: 1,100 mm, total height: 1,800 mm, Press Brake Brand: PROMECAM Model: PPH25.12B Capacity: 1200 x 25T Chedpjxwukcofx Abbef Distance between uprights: 1020 mm Throat depth: 200 mm

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 Sh Year of manufacture: 2012 Pressing force: 60 tons Csdpfx Ajx Af Ntsbbjhf Voltage: 400V Maximum bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm x 80 cm deep x 55 cm high Condition: Very good! Functionality checked. FLITS Rental & Sales service: With every machine, we supply a bundle of binding wire (120 wires). Need more bundles of binding wire? Request a quote with no obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We focus on delivering efficient solutions in the areas of internal transportation, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a wide range of machines suitable for deployment in various sectors. See our advertisements for: waste balers for efficient waste management, electric pallet trucks/stackers for fast and safe internal transport, scrubbers for thorough and professional floor cleaning, forklifts in various designs suitable for different working environments. With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you quickly have the right machine at your disposal. Visit our location You are very welcome to view the machines at our premises. We are located at: Schoterlandseweg 94, 8413NE Oudehorne, Netherlands. Visits are possible by appointment, so we can take the time to inform you thoroughly and show you the right machines. Contact Do you have questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you further. Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing DIXI

Condition: repair required (used), Extraction system with Nestro briquetting press Untested - In need of repair Therefore, being sold at a very low price. Location: ex stock 54634 Bitburg Codsxy Agkopfx Abbshf - immediately available -

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 744165, paper height (max.): 840 mm, KBA Rapida 75-4 offset press, format 510x735 mm, max. paper height 840 mm, 4 colors, 60 million impressions, year 2014, in very good condition, regularly serviced and maintained. Csdpexzhp Tofx Abbehf

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Hydraulic press brake PPBL 135/30 Year of construction 1990 Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2250mm Stroke 110mm Distance table – ram 310mm Gap 200mm Width table 180mm Approach speed 100mm/s Working speed 8mm/s Return speed 65mm/s weight 6500 kg motor 7.5kW Voltage 3 x 380V Oil-tank 120L Options inlcuded; • Back gauge with 2 fingers • Range of back gauge 600mm • 2 front supports of 300mm • Table with center slot Tooling included with machine; Cjdpfjw Hca Hsx Abbohf • R10.180.78. 6x508mm • Multi-V M90 1x3050mm

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Cjdpfx Ajv Srfwebbehf Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,650 h, Control Unit Brand AMADA Model CNC 3i Main Drive Pressing force 100 tons Bending length 3000 mm Number of axis 8 Additional Equipment Accessories: Includes tool package by arrangement Optional Tools: 2x 830 mm prisms and 2x 830 mm bending beams R5 Cedpfx Abjx A I Hbebjhf This 8-axis AMADA HFE 3L 1003 press brake was manufactured in 2017. It features a pressing force of 100 tons and a bending length of 3,000 mm, complemented by an Amada CNC 3i control system. With only 3,650 operating hours, it is in excellent condition, fully functional, and ready for operation. Consider the opportunity to buy this AMADA HFE 3L 1003 press brake. Contact us for more information about this machine. Application Types Bending

Condition: used, Year of construction: 2012, operating hours: 25,000 h, total length: 5,250 mm, total width: 2,350 mm, total height: 2,750 mm, Weight: 12.500 kg Price: On request - Year: 2012 Cedpjwmf Efofx Abbjhf - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7336127126 - Operating hours: 25000 - Drive system: CNC - Control system brand: Cybelec - Control system type: DNC-880S - Power [kW]: 18.5 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 175 - Max. working width [mm]: 4050 - Column gap [mm]: 3600 - Max. stroke [mm]: 255 - Control type: DNC 880S - Control: CNC - Transport dimensions: 5250mm x 2350mm x 2750mm (l x w x h) - Transport weight [kg]: 12500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, - Capacity 160 tons - Cylinder stroke 400 mm Cjdpfx Abex Azghebjhf - Working width 1000 mm - Pressure gauge - Emergency stop - 400V

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm Chjdsx A Safspfx Abbsf T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2000, CNC press brake Manufacturer: Trumpf Model: Truma Bend V170 Year of manufacture: 2000 Codpsx Di Hxjfx Abbehf CNC control: Delem Press force: 170 t Working width: 4 m Crowning Backgauge 6 axes Hydraulic tool clamping Height: 2.9 m Without tools 51225

Condition: good (used), functionality: fully functional, operating hours: 12,921 h, Used AMADA press brake Model: HFP220-4S Capacity: 4000 x 220T Number of axes: 8 axes CNC: AMNC, retrofitted by AMADA in 2022 Fast working speed: 100 mm/sec Ram stroke: 200 mm Electrical power: 67 amps, 38.5 kW motor Chodsxwtvdjpfx Abbof Operating hours: 12,921h Machine tested and inspected by AMADA – report with photo Video on request Machine loaded onto truck

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,915 h, General Data Machine weight 15000 kg Measurements height 3000 mm Dimensions Machine Length 4100 mm Main Drive Number of axis 5 Bending length 3100 mm Pressing force 2500 Kn Movement X-Axis Movement 600 mm Z-Axis Movement 1900 mm This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine. Csdpfx Abjx Aw E Tebjhf Application Types Bending

Condition: ready for operation (used), functionality: fully functional, pressing force: 400 t, stroke length: 150 mm, number of cylinders: 10, cylinder diameter: 120 mm, TECHNICAL DETAILS Maximum pressing dimensions: 1,500 x 4,400 mm Maximum stroke: 150 mm Pressing force: 400 t Number of cylinders: 10 Cylinder diameter: 120 mm Material of press plates: aluminium Plate thickness: 90 mm MACHINE DETAILS Electrical data Connected load: 7.5 kW Voltage: 380 V Type of heating: Oil Cedpsxw R N Isfx Abbehf Dimensions & Weight Dimensions (L x W x H): 13,000 x 2,400 x 2,400 mm Weight: 25,000 kg EQUIPMENT With infeed and outfeed conveyor Heating boiler included

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Chodpfxov Srfds Abbof Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm Cedjvzxttspfx Abbohf ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation