Used Butt Weld for sale (7,591)

Condition: ready for operation (used), Year of construction: 1989, machine/vehicle number: D205228, Heinrichsglueck H-36 welding positioner Fully functional. Square table 1050x1050mm. Gijdeuiac Hopfx Admol The set includes a remote control with adjustment of table rotation speed and inclination (135 degrees). New power and control cable.

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Gjdpfxsxf Up Is Admoil

Condition: used, final pressure: 1,400 bar, pressure: 1,400 bar, Good working high pressure pump with 20mm plungers 1400 bar 35 ltr/min IL 375 TF375H Gedpfxsv Suhzj Admjil

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Gijdpsxfrv Eofx Admsl Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: IRB1400 M2000, arm reach: 1,440 mm, Robotcel with baseframe IRB1400 M2000 robot 1.44. IRC-4C+ IRBP-K750 manipulator with clamping distance of 3150 x 1400mm. Fronius TPS500 Bulls-eye Gedpfx Adevr Al Ismsil Torch cleaner New fence, lightbarriers and safety plc

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free. Gijdpeh Ad E Uefx Admel

Condition: used, MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled Gijdpfxoucmptj Admsl -Length: 4.30m -Transport dimensions: 600/420/H90 mm -Weight: 3.8 kg

Condition: new, neu 020520 ca. 2 - 4 Wochen ab Auftr 1318 € 28 mm Accessory set consisting of: 4 pcs. screw clamp 180° HIS28Z3000 2 pcs. screw clamp 45° HIS28Z3045 Gjdpfswirrdsx Admjil 2 pcs. V-support HIS28VP100 12 pcs. quick clamping bolt short HIS28SB100 4 pcs. stop rail 150mm HIS28FA150 4 pcs. stop rail 225mm HIS28FA225 2 pcs. stop rail 175mm HIS28WA175 2 pcs. stop angle 275mm HIS28WA124275 and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L) OPTION: Tool cart HIS28WW1000 € 545,--

Year of construction: 2023, condition: used, machine/vehicle number: 0165780, +++Special Price+++ Robust, self-aligning container rotating device 1 used, well-maintained rotating device with a load capacity of 20 t, consisting of: 1 x drive unit 1 x idler unit 1 x handheld remote control with digital rotation speed display 1 x dual foot pedal for start/stop/rotate left/right Technical Specifications Type: ZT20 Total load: 20 t Load per unit: 15 t Roller diameter/width: 381 x 170 mm Roller material: Polyurethane Rotation speed: 100–1,000 mm/min, continuously adjustable via frequency converter Component diameter: 400–4,000 mm Electrical system: Freestanding control cabinet (can also be mounted on the machine upon request) Control system: Wired handheld remote control Godpfxswhc Uas Admeil Connection voltage: 380/400 V, 3-phase, 50 Hz The system can also be rented. Upon purchase, the rental fee can be credited upon request. Photo shows a new system. We are happy to arrange delivery throughout Europe.

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic Gijdpefvqmxsfx Admjl

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Gijdpfxjrl S Ufo Admel Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: used, WELDCLAD submerged arc welding system for cylinder coating No. 02 independent welding lines No. 02 submerged arc welding systems No. 02 LINCOLN welding sources mod IDEALARC DC 1000 (output 150 – 1300 A – NOMINAL POWER 1000A/44V/100%) No. 01 command pulpit with no. 02 independent government units No. 02 positioned for rollers with a diameter of approximately 500 x approximately 4000 mm, capacity 4000 kg Giedpfetq At Ujx Admol Sand supply system for submerged arc welding

Year of construction: 1986, condition: used, machine/vehicle number: 3824, Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device, turn-tilt tables positioning device -Table: is tiltable 360° -Clamping diameter: 850 mm -Drive: 3.5 kW -Dimensions: 4000/1480/H1350 mm Giedpohrfk Hofx Admel -Own weight: 2880 kg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3420 € 2000 x 1000 mm 850 mm 8000 kg 712 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners Gsdpewir A Njfx Admjil

Condition: like new (used), Exceptional machine for professional TIG welders WELDKAR Giedpjxf Nvpofx Admsl The TIG 320 AC/DC Pulse features a 320 Amp power source (60% duty cycle) at 400 Volts. Under continuous operation, the maximum welding current is 250 Amps. This TIG welder is perfectly suited for (medium to) heavy industrial work and series production. - WK TIG 320 AC/DC Pulse power source with EMC - WK MIG 5040F / WK TIG 320 AC/DC water cooler – 5 liters - Chassis for WK TIG 320 AC/DC Pulse - Tig welding torch WK 18 – 4 meters, water-cooled - Inline water unit WK MIG 5040F / WK TIG 320 AC/DC - Wireless remote control for WK TIG 320 AC/DC Pulse - Foot pedal for WK TIG 320 AC/DC Pulse - Welding cable set 300A WKP 35-70, 35mm² - Ground cable set 300A WKP 35-70, 35mm² NET PRICE: 10,500 GROSS PRICE: 12,915

Condition: used, MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.45 m Gsdpfoucmpgjx Admjil -Transport dimensions: 600/460/H80 mm -Weight: 3.9 kg

Condition: new, neu ca. 4 Wochen ab Auftragse Gisdpfswirwaex Admjl 1940 € 2000 x 1000 mm 850 mm 449 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: like new (used), New industrial welding machine WELDKAR Multi-GMAW 400S DP Multi-GMAW 400S DP Features: TIG HF, LIFT TIG, MMA, MIG Double-pulse MIG Synergic operation Input voltage: 3-phase AC 400 V ± 10% Selectable water/air cooling IGBT module High duty cycle MCU control system Enhanced protection Tested at 550 V Generator-friendly Power supply: 3-phase Gijdpfsxf Nviex Admsl Duty cycle: 60% at 400 A / 100% at 310 A Enables activation of dedicated pulse curves for aluminium, mild steel, and CuSi3 Waveform control for additional arc stability, even at low currents Digital control of all welding parameters Generator-friendly design allows cooperation with diesel generators, preventing failures caused by voltage spikes Protections include phase loss, overheating, overvoltage, undervoltage, and overcurrent NET PRICE: 10,000 GROSS PRICE: 12,300

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg 200 mm 28 mm * - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 Gjdpfx Aswiripedmjil The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: like new (used), The MULTIMIG F SYN series welding machines feature state-of-the-art technology. Instead of the conventional 50 Hz frequency used in transformers, these welders operate at frequencies ranging from 20 kHz to 50 kHz. This provides the equipment with excellent dynamic response, portability, compact size, low weight, reduced energy consumption, and more. The MULTIMIG F SYN welding machines are suitable for welding various materials such as stainless steel, carbon steel, alloyed steel, etc. Therefore, they can be used in general metalworking industries, machinery and equipment repair, construction, production and repair of installations in the petrochemical industry, DIY workshops, and more. Features of the MULTIMIG F SYN series welders: - Digital control system with accurate welding parameter display - High-performance multifunctional power source (MIG/MAG) - Dynamic control and stable welding parameters - IGBT technology for low energy consumption - Rated duty cycle: MULTIMIG 500F SYN = 500A at 60% (40°C) Specification: - Input voltage (V): 3~380/400/440±10% - Frequency (Hz): 50/60 - Input current (A): MIG 43; TIG 32; MMA 43 - Output power (kW): MIG 23; TIG 18; MMA 23 - Welding current (A): 40-500 (MIG) Gedpfxexfln Ue Admoil - Welding voltage (V): 10-50 (MIG) - Open circuit voltage (V): 63 - Duty cycle (40°C): 60% at 500A, 100% at 400A - Wire diameter (mm): Fe: 0.6/0.9/1.0/1.2/1.6; SS: 0.8/0.9/1.0/1.2/1.6; Flux-cored: 0.6/0.8/0.9/1.0/1.2/1.6 - Protection class: IP23 - Insulation class: H - Dimensions (mm): 605x240x445 - Weight (kg): 31.5 - Power factor: 0.7 Includes cooler, trolley, torch, and ground cable. Set includes: 500F SYN power source, cooler, trolley, power supply box, MB 500 4m water-cooled torch, and ground cable. Net price: 9,500 Gross price: 11,685

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4400 € 2400 x 1200 mm Gijdpfxjwiriis Admol 850 mm 8000 kg 945 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. Giedpswiricofx Admsl - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1190 € 1000 x 1000 mm Gedpfx Ajwirg Uodmjil 850 mm 210 kg 25 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1490 € 1500 x 1000 mm 850 mm 344 kg 28 mm Gjdpfxowirg Io Admoil - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, neu 2486 prompt, Zwischenverkauf v 545 € 1 Gsdpfowirlqox Admeil 28 mm Tools are not included in the price.