Used Boki Hy 1251 for sale (19,810)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 20,134 h, load capacity: 46,000 kg, lifting height: 15,355 mm, fuel type: diesel, power: 240 kW (326.31 HP), total length: 9,250 mm, drive type: Diesel, construction width: 4,204 mm, Full Container Reachstacker Load center: 1865 Transmission: Dana TE30 Condition: Ready for operation and fully functional Technical condition: Very good Front tire size: 18.00-33 Rear tire size: 18.00-33 Gtodpex Alq Rofx Admjt Hydraulic support jacks for increasing the lifting capacity in the 3rd row from 21 t to 30 t, central lubrication system

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: B3170-0054, turning length: 700 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 5,000 mm, total width: 2,000 mm, quill diameter: 100 mm, overall weight: 7,000 kg, controller manufacturer: FANUC, controller model: SERIES 21i-TB, number of slots in tool magazine: 12, HYUNDAI - KIA SKT 250 M CNC Lathe Gtjdex T Ac Uopfx Admjt - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 27 kVA - Max. machining diameter: 410 mm - Max. swing diameter over cross slide: 480 mm - Chuck size: 254 mm - Spindle bore: 95 mm - C-axis: 0.001° - Includes tailstock, a HAINBUCH collet chuck, a 12-station tool turret with live tooling, and a chip conveyor Attention: The item must be collected by binding agreement between 18 and 26 February 2026, on a date to be coordinated. FCA D-78087 Mönchweiler – loaded onto truck

Condition: good (used), servo motor, electric motor, DC motor, stepper motor, stepping motor, compact asynchronous motor Gsdpfovrdmtox Admott -Manufacturer: phytron, stepper motor type ZSS 52-200-2.5 25:1 -Manufacturer gearbox: Gysin type GPL 052-2S/25-1 i 1/7 -Dimensions: Ø 82 x 185 mm -Total weight: 2.9 kg

Condition: used, Year of construction: 2012, operating hours: 5,925 h, Serial number: hhih0604cc000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20243 Specifications: - 2012 model - 5925 Hours - 24060 kg - 107 kW - Machine width: 310 cm - Track width: 70 cm - Track controls - Rear hatch does not lock - Chassis should be replaced - Loose track plates - Gps - Excavator bucket - Hydraulic cleaning bucket can be included for an additional charge - Lights - Radio - Air conditioning/ac - Ready to deliver Description: Gedpfxexdux Ts Admott We have a 2012 Hyundai Robex 235LCR-9 w/ Excavator bucket and gps for sale. The chassis should be replaced and the side hatch does not lock. Other than that, the machine works as it should according to the owner. But some additional costs must be considered. A hydraulic cleaning bucket can also be included for an additional charge. Ready to deliver Hours: 5925 Own weight: 24060 Total Weight: 24060 Width: 310 Kw: 107 Model: Robex 235LCR-9 m/ Graveskuffe og gps

Condition: excellent (used), Year of construction: 2018, Swing over carriage 355mm, Gtedpsrztr Refx Admst Bar capacity 65mm, Maximum machining diameter 310mm, Maximum cutting length 521mm, Spindle speed 4,000 rpm, Milling speed 5,000rpm, C axis 0.001 degrees, spindle power 22/18.5 Kw, 12 station turret, Fanuc 32i control, swarf conveyor, tool setter , 3 jaw chuck

Condition: used, Year of construction: 2022, operating hours: 1,934 h, 2022 | Hyundai HL975A CVT | Used Wheel Loader | 1934 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 189500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 49 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Well-functioning machine and good-looking machine, a bit of play on the quick coupler and articulation pin, tires need to be replaced as they are on the bad side, here and there some spots of damage. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39199 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Gtjdpfxsx Tczqo Admst ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2025, machine/vehicle number: 20241119012, fuel type: diesel, motor manufacturer: Hyundai P086TI, General information Field of application: Construction Weights Empty weight: 2.364 kg Functional Generator capacity: 220 kVA CE mark: yes Other information Fuel consumption: 31.7 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44M Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 224 l Transport dimensions (LxWxH): 3,51x1,13x1,75 Additional information Gtjdpfxjxl N Ras Admst Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, Year of construction: 1996, pressure 100 t throat 510 mm stroke 600 mm dayligth 1000 mm table surface area 1025 x 650 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 600 x 400 mm table height over floor 970 mm ram surface 1025 x 650 mm feed down 350 mm/sec Gjdpfxevuunms Admott feed up 330 mm/sec working feed 30 - 43 mm/sec oil volume 540 l total power requirement 48,0 kW weight of the machine ca. 12,0 t required space 1,2 x 2,7 x 3,9 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table Video of the finished 'sister machine' - with new electrical control - available

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3588791, HYDAC Gjdpsx Swz Aefx Admott S31A-IG16 Nominal capacity: 288 kW Heat transfer surface: 29.93 m3 Max. operating pressure: 16 bar Volume: 53 L Temperature: 0 - 100 °C

Condition: used, Year of construction: 2003, operating hours: 4,399 h, Please contact ATS Norway for more information Please provide reference number upon request: 20241 Specifications: - 2003 model - 4399 hours - Automatic transmission - 4x4 - 91kW - 7320 kg - Rotation on basket - ​​Remote control for basket - ​​Aggregate Gtedpfx Adsxwkl Nomot - Hydraulic support legs - 2007 Essverk Platform 912 - Tires (see pictures) - Serviced by owner. - Lights - Air conditioning - Heated mirrors - Ready for delivery   Description: We have a 2003 Hydrema 912B w/2007 Essverk Platform 912 lift with rotation on basket and remote control for sale. It starts and runs according to the owner. Services have been performed by the owner. The lift is controlled by remote control. Errors and defects may occur so some additional costs must be expected. Ready for delivery. Hours: 4399 Own weight: 7320 Total Weight: 7320 Kw: 91 Model: 912B m/ 2007 Essverk Plattform 912 lift med rotasjon på korg og fjernkontroll

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Table load 600 kgs, Spindle speed 8,000 rpm, Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Fanuc I series, coolant, swarf conveyor. Gtsdpfx Adeu Ehi Aemst

Condition: good (used), Stick electrodes 3.2 x 350 -Type: Phoenix 120 K -Price: per package Gtsdpfx Aed Iuxredmot -Number: 4 packages available -Weight per package: 4.3 kg

Condition: new, Year of construction: 2025, machine/vehicle number: 20250501001, fuel type: diesel, motor manufacturer: Hyundai P086TI-1, General information Field of application: Construction Weights Empty weight: 2.035 kg Functional Generator capacity: 165 kVA CE mark: yes Other information Fuel consumption: 26.7 Liter / Hour at 75% Load Gtsdpfow Sc Duex Admst Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 185 l Transport dimensions (LxWxH): 3,308x1,13x1,8 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai P086TI-1 / Doosan P086TI-1

Condition: used, Year of construction: 1993, pressure 100 t distance between columns 1900 mm stroke 500 mm Distance table/ram, stroke up 800 mm table surface area 1850 x 1000 mm Hole in the table 160 mm table height over floor 850 mm ram surface 1850 x 800 mm Side window 540 mm speed down 400 mm/s speed up 400 mm/s working speed 20 - 70 m/min oil volume 900 l Power capacity 34,0 kW Weight 13,0 t Dimensions (WxDxH) 2,7 x 2,2 x 4,0 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary Gtedpjvuui Defx Admot can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control Godpfx Aex I A Hcjdmstt SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: used, machine/vehicle number: A970B03xxxx, Year of construction: 2020, operating hours: 755 h, Please contact ATS Norway for more information Please provide reference number upon request: 19739 Gtodswpia Sopfx Admjt Specifications: - 2020 model - Hours: Approx. 755 - Approved until 10.25 - Weight: 7430 kg w/ battery - 15 kW - Electric - Charger - Max lifting capacity: 4000 kg - Max lifting height: 3.65 m - Ready for delivery Description: Hyster J4 Truck from 2020. Comes with charger for the truck. The maximum lifting height is 3.65 m and the maximum lifting capacity is 4000 kg. Ready for delivery. Hours: 755 Total Weight: 7430 Year controlled: Yes Year controlled until: 10.25 Lifting heigth: 365 Lifting capacity: 4000 Kw: 15

Condition: good (used), functionality: fully functional, Please email or call for further details Gedjxw Il Tepfx Admjtt

Condition: new, Year of construction: 2025, machine/vehicle number: 20250605009, fuel type: diesel, motor manufacturer: Hyundai DP222LC, General information Field of application: Construction Weights Empty weight: 6.185 kg Functional Generator capacity: 825 kVA CE mark: yes Other information Fuel consumption: 119 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49 Frequency: 50 Voltage: 400 Gedpfx Adoxivr Eemott Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1090 l Transport dimensions (LxWxH): 4,808x1,95x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP222LC / Doosan DP222LC

Condition: used, Year of construction: 1980, pressure 400 t distance between columns 3250 mm distance table/ram, max. stroke up, adjustment up 1000 mm stroke 800 mm table surface area 3250 x 1400 mm table height over floor 1250 mm die cushion capacity 170 t die cushion stroke 200 mm die cushion area 1800 x 1000 mm Gjdpfovuk S Iex Admstt distance between cutting impact cushioning 2610 mm side window 800 mm ram surface 3250 x 1400 mm return capacity 51 t speed down 300 mm/s speed up 300 mm/s working speed 16 - 33 mm/s quantity of oil 2900 l power requirement 100,0 kW weight 70,0 t Dimensions (WxDxH) 4,9 x 3,1 x 7,6 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning with motoric adjustable depth stop, hydraulic ram interlocking, two-hand operation as is where is, WITHOUT putting into operation / WITHOUT additional work The putting into operation in our warehouse (with new electrical control) / Safety adaptations / overhaul can be offered additionally on request

Condition: new, Year of construction: 2025, machine/vehicle number: 20250405005, fuel type: diesel, motor manufacturer: Hyundai DP158LC, General information Field of application: Construction Weights Empty weight: 4.600 kg Functional Generator capacity: 510 kVA CE mark: yes Other information Gjdpfxjw Alurs Admstt Fuel consumption: 72.9 Liter / Hour at 75% Load Generator: Leroy Somer TALA473B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Transport dimensions (LxWxH): 4,008x1,8x2,35 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP158LC / Doosan DP158LC

Condition: used, Year of construction: 1996, pressure 250 t distance between columns 2100 mm stroke 300 mm Distance table/ram, stroke up 850 mm Gtjdpfxjvuuids Admjt Table surface area 2000 x 1300 mm Table height above floor 900 mm Side window 1300 mm Ram surface 2000 x 1300 mm Oil volume 1300 l Power capacity 60,0 kW Weight 39,5 t Dimensions (WxDxH) 3,4 x 3,4 x 4,6 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: new, Year of construction: 2025, machine/vehicle number: 20250320030, fuel type: diesel, motor manufacturer: Hyundai P126TI-II, General information Field of application: Construction Weights Empty weight: 3.254 kg Functional Generator capacity: 330 kVA Other information Fuel consumption: 47 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 480 l Transport dimensions (LxWxH): 3,938x1,3x2,01 Gsdpfx Aouq U Smodmott Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai P126TI-II / Doosan P126TI-II

Condition: used, Year of construction: 2006, pressure 250 t distance between columns 3000 mm stroke 600 mm Distance table/ram, stroke up 900 mm Table surface area 2500 x 1300 mm Gjdovuuhaspfx Admjtt Table height above floor 1050 mm Side window 1350 mm Ram surface 2500 x 1300 mm Speed down 500 mm/s Speed up 400 mm/s Working speed 36 - 64 mm/s Oil volume 2700 l Power capacity 137,0 kW Weight 54,0 t Dimensions (WxDxH) 4,1 x 4,55 x 6,15 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2018, Pressure 315 t stroke 750 mm distance between columns 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface area 1600 x 1300 mm pressure of drawing cushion in table 125 t Die cushion stroke in table 350 mm Die cushion pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Side window 1100 mm feed down 400 mm/s feed up 400 mm/s working feed 12 - 44 mm/s oil volume 2500 l power requirement 35,0 kW Weight 43,50 t dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm height over floor 4,9 mm yom 1987 -> 2018: new electric control Siemens S 7 new ligh guard at the front (Sick C 4000) permitted for manual loading according to the German Safety Regulations (UVV) Gedpfx Ajvuuf Eodmott with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) Gtedpfx Aovut D Todmot with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F