Used Boiler Tube for sale (2,569)

Condition: ready for operation (used), Year of construction: 2000, A boiler plant is available. Thermal output: 2000kW, water content: 5820l, heating surface: 250m², max. operating overpressure: 4bar, water quality: TRD 612, max. permissible flow temperature: 110°C. An on-site inspection is possible. Hsdpfx Aisxwcupjcjnr

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Hedpfx Ajtxb Avjiconr

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Hsdpfx Aietxb Apeconr

Condition: ready for operation (used), Year of construction: 2017, Two Weishaupt gas burners including two WMG boilers are available. Output: 2x3.3MW. Documentation available. An on-site inspection is possible. Hjdpfoxt Rlnsx Aicjnr

Condition: ready for operation (used), Year of construction: 2013, An old steam boiler Loos including a relatively new Weishaupt burner is available. 1) Steam boiler Loos UL-S, year of manufacture: 1991, steam output: 6000kg/h, max. operating overpressure: 13bar, boiler volume: 6380l. 2) Weishaupt burner G50/2-A, year of manufacture: 2013, output range: 600kW-5400kW, connection pressure range: 15mbar-500mbar. Documentation available. An on-site inspection is possible. Hnsdpox Uq T Rsfx Aicsr

Condition: ready for operation (used), Year of construction: 2015, A Bosch low-pressure steam boiler is available. Total volume: 2480l, max. permissible pressure: 0.5bar, test pressure: 2bar, max. permissible temperature: 110°C, steam output: 1400kg/h, insulation thickness: 100mm. Machine dimensions X/Y/Z: approx. 2850mm/3800mm/3350mm, weight: approx. 3350kg. Documentation available. On-site inspection is possible. Hnedpfx Aou Ilcloicjr

Condition: ready for operation (used), Year of construction: 2020, A complete low-pressure steam boiler system Viessmann is available. 1) Condensate unit Viessmann TWA-T LS 0,9, max. operating pressure: 0.1bar, test pressure: 0.2bar, max. temperature: 110°C, water volume: 400l. 2) Dosing system Schweizer-Chemie EMP 2.5l E60. 3) Steam generator Viessmann Vitoplex 100-LS, year of manufacture: 2019, nominal heat output: 460kW, steam capacity: 700kg/h, water volume: 960l, operating pressure: 1bar, test pressure: 4.8bar. 4) Control cabinet Viessmann Vitocontrol HS. 5) Steam accumulator/pressure vessel Viessmann RBS/1 1000 So. steam, volume shell space/tube space: 990l/17l, max. operating overpressure shell space/tube space: 10bar/2.5bar, max. operating temperature shell space/tube space: 95°C/130°C, test pressure shell space/tube space: 13bar/4bar. Documentation available. An on-site inspection is possible. Hjdjx Uq Uujpfx Aiconr

Condition: ready for operation (used), Year of construction: 1997, A horizontal fire-tube/smoke-tube boiler Loos with a 2-pass system is available. Steam output: 2000kg/h, max. operating overpressure: 11.5bar, fuel: oil/gas. An on-site inspection is possible. Hedeyw Svxopfx Aicjnr

Condition: used, Year of construction: 2005, Steam generation plant, comprising the following main components: - Three-pass steam boiler (Loos) for the production of 2,000 kg/h of saturated steam at rated load - Oil burner (Weishaupt) for EL heating oil with an output of up to 2,145 kW - Economiser (Loos) with approx. 30 m² of heat transfer surface area and an insulated casing - 2 feedwater pumps (Grundfos) - 1,500 l insulated feedwater tank (Loos), horizontal, with feedwater degassing Additional title: oil-fired three-pass steam boiler with economiser Steam production capacity: 2000 kg/h ; corresponds to a gross heat output of 1,335 kW Max. operating pressure: 13 bar Max. operating temperature: 195 °C Exhaust gas loss: 4,6 % Voltage: 400 V Frequency: 50 Hz Position: horizontal Base construction: three-pass design Features: Steam boiler; oil burner; exhaust gas heat exchanger (economiser); feedwater tank; 2 x feedwater pumps; sensors; actuators; control cabinet; various pipes and valves Hnsdeztpx Hopfx Aicer

Condition: used, Year of construction: 2003, Used Pressure Vessel Last Application: Pharmaceutical Article Number: 10162 Volume: 92 liters Type: Standing on rollers Material (in contact with media): AISI 316 stainless steel Number of supports: 4 rollers Bottom: Conical bottom Top: Conical top Hnsdpfx Aiedcr H Socer Operating pressure according to nameplate: +1.5/-1 bar Max. operating temperature: +150°C Extras: Sight glass on the top, roller frame, spray head Dimensions of the vessel: Internal diameter: 560 mm External diameter: 570 mm Height of rollers: 130 mm Distance from outlet to bottom: 830 mm Overall height: 1310 mm Overall width: 1310 mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: Yes Outlet: Bottom valve

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Hsdpfeztvgwsx Aiconr Technical data: - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm Hnedpfx Asuluhwjicjr

Condition: ready for operation (used), Year of construction: 2009, A Nolting moving grate wood-fired boiler system is offered. Max. boiler output: 1125kW, nominal heat output: 900kW/1125kW, max. fuel moisture: W50/M30, optimum efficiency range: >90%, flue gas connection: DN250. Machine weight: approx. 4800kg. Inspection possible by arrangement. Hedpezt Sk Esfx Aiconr

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Equipment: LoadMaster Tube 6.5 m Layout plan (German) Operating manual (German) Stable machine frame with integrated laser unit Hnjdpfx Aszrt Uisicsr Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Annual service by Kaste

Condition: excellent (used), Year of construction: 2017, 1 used steam boiler Manufacturer: Bosch Type: U-MB 2020 Capacity: 2,000 kg/h Permissible operating pressure: 13.0 bar Increased test pressure: 24.1 bar Maximum temperature: 195°C Total volume: 2,065 l Year of manufacture: 01/2017 CE marking: CE 0036 Equipped with a Weishaupt gas burner, type WM-G20/3-A, 300-2,000 kW, ZM-LN design, 15-500 mbar, gas control system, separate control cabinet, Loos Boiler Control LBC boiler control system, feed water pump, Eco Type 1, capacity 89 kW, volume 41 liters, temperature 238°C, permissible operating pressure 31 bar, test overpressure 56 bar, Hjdpfxozltals Aiconr and the existing coarse and fine fittings.

Condition: good (used), Year of construction: 1995, pipe diameter (max.): 28 mm, Pipe diameter: 4-28 mm Total power requirement: 1.5 kW Hnedpfx Aieztqbpscsr - Drive: Hydraulic cylinder and roller chain - Pipe range: 4-28 mm - Bending angle: 190° (without pipe) - Bending radius: 1.5 x D – 2.0 x D - Nominal pressure: 250 bar - Operating pressure: 3005 mm - Delivery rate: 4.5 l/min

Condition: ready for operation (used), Nominal power: 468.2kW, max. temperature: 100°C, capacity: 59l, length: 1870mm, width: 845mm, height: 1460mm, weight: 465kg, was maintained regularly. Hedpfxomt Efns Aicsnr

Year of construction: 2007, condition: ready for operation (used), A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible. Hsdsztdr Uspfx Aicsnr

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Hjdpsvk Scgofx Aiconr Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Year of construction: 2016, condition: used, Manufacturer: FELSS, Model: CBC, Year of manufacture: 2016, Serial number: 15-5164B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, Maximum tube length: 1,200 mm, 2 CNC bending heads, PC control with touch display, operator console, double-deck feeder system, loading station, robot manufacturer: Yaskawa, type YR-MA1440/MH12-A00, robot controller type DX200, teach-in terminal, small parts feeder with supply hopper, vibration feed bowl, singling station, unloading/alignment station, crate removal conveyor: length 7,000 mm, crate size 350 x 250 x 150 mm, switch/control cabinets, safety fence/Plexiglas enclosure, staging platforms/racks, label printer manufacturer: CAB, model eos 1, barcode scanner manufacturer: Zebra, model Omni tc15. Hedpfx Aijyx Euqecsnr

Condition: used, Year of construction: 2012, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1057, 2 CNC bending heads, Bending capacity Ø 30 x 2 mm (steel), Bending planes selectable within a total tool height of 138 mm, Travel range X/Y/Z 1,416 x 260 x 1,170 mm, Collet head with feed slide, PLC control Siemens S7-300, Touch display, Loading magazine, 2 robots, make: Motoman, Robot control unit, make: Yasnac, Model: K10, Teach-in terminal MRC, Spray cleaning system, Chamber size 500 x 300 x 1,000 mm, PLC control with operator panel, make: Siemens, Model: SIMATIC Panel, Thermostat, 3 washing chambers, Tube cutting station, make: FZH, year: 2012, serial no.: M99964, Control system, Display make: Siemens, Model: SIMATIC Panel touch. Hjdpfx Aeyx Erieiconr

Year of construction: 2017, condition: used, Serial No. 15-6139B, CNC control with touch display, indexing feed conveyor, robot by Yaskawa, type YR-MH00012-A00, year 2011, robot controller DX200, Teach-in terminal, box unloading section, L 7,000 mm, switch/control cabinets, plexiglass enclosure, peripheral units, machine accessories. Subject to prior sale. Hsdsy A In Uepfx Aicsnr

Year of construction: 2016, condition: used, Serial no. 15-3599B, primarily comprising: feed station with 2 product lines, continuous cycle conveyor, 2 forming stations, turning station, micro-lubrication station, through-feed washing machine, Manufacturer: Bous, Model: Duwamat K1000 WSST, Year: 2016, Serial no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating capacity 16–24°, fine filter, oil separator, control cabinets, system control with operator panel, Manufacturer: Siemens, Model: SIMATIC HMI touch, inspection system with 2 cameras, Manufacturer: KEYENCE, Model: Vision System, eddy current testing device, Manufacturer: Rohmann, Model: Elotest IS500, laser marking system, Manufacturer: Videojet, Model: 7510, fiber laser, laser power 50 W, discharge station, roller conveyor system for crate removal, 2 product lines, satellite terminals, switch cabinets, safety devices, plexiglass enclosure, peripheral units, including extraction system, Manufacturer: ESTA, Model: Whispersog 2.2 JET, overnut feeder with loading bunker, vibrating bowl feeder, separation unit, loading station, set of trolleys, set of load carriers, trolleys. Hodey A Ih Uepfx Aiconr Subject to prior sale.

Year of construction: 2019, condition: used, Make: FELSS, Model: CBC, Year: 2019, Serial No.: 18-2112B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, max. tube length 1,200 mm, 2 bending units, PC control with touch display, operator console, double-deck feeding system, loading station, robot, make Yaskawa, type YR-MA1440/MH12-A00, robot controller, type DX200, teach-in terminal, small parts feeding system with loading bunker, vibrating feeder bowl, singling unit, removal/alignment station, box outfeed line L 7,000 mm, box size 350 x 250 x 150 mm, control cabinets, protective fence/plexiglas enclosure, component provision platforms/shelves. Hnjdeyx Ev Uopfx Aicer

Condition: ready for operation (used), Year of construction: 2015, operating hours: 67,121 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, laser power: 3,200 W, travel distance X-axis: 6,500 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 170 mm, overall weight: 17,000 kg, total height: 2,800 mm, product length (max.): 16,000 mm, number of axes: 5, Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details. • Working range A1 axis (pulling chuck): n x 360° • Working range A2 axis (feed station): n x 360° • Workpiece max. length of raw material: 6500 mm • Workpiece min. length of raw material: 3000 mm • Workpiece min./max. outer diameter (circular): 20–152 mm • Workpiece min./max. side length (rectangular, at max. circumscribed circle 170 mm): 20–150 mm • Workpiece max. length of finished part: 3000 mm • Workpiece min. length of tube remnant: 120 mm • Workpiece max. scrap length: 400 mm • Bundle dimensions max. cross-section: 600 x 750 mm • Bundle dimensions max. weight: 4000 kg • Material weights max. workpiece weight: 130 kg (loading 6.5 m) • Material weights max. workpiece weight per meter: 20 kg/m • Speeds X axis (+): 170 m/min • Speeds X axis (-): 100 m/min • Speeds Y axis: 60 m/min Hedpfxezlq I He Aicenr • Speeds Z axis: 60 m/min • Speeds A axis: 780 °/s • Positioning accuracy, position deviation Pa: ±0.2 mm / ±0.015° • Positioning accuracy, mean position dispersion Ps: ±0.06 mm / ±0.005° • Smallest programmable path length: ±0.01 mm / ±0.001° • Lens cutting head focal length: 155 mm • Depth 7000 mm; Length 16000 mm (loading 6.5 m, unloading 3 m) • Laser on hours: 15786 Additional equipment • Option to reduce minimum circular tube outer diameter to 15 mm (from 20 mm) • Option to reduce minimum rectangular tube side length to 15 mm (from 20 mm) • Option to increase max finished part length to 6500 mm (from 3000 mm) • Option “Length of finished parts +1.5 m”: adds 1500 mm to finished part length • Optional 8.0 m loading system: increases max workpiece weight to 160 kg (from 130 kg)