Used Boiler Tube for sale (3,101)

Condition: excellent (used), Stainless steel conveyor system Todpexxalhsfx Ahujf

Condition: used, Year of construction: 1980, outer diameter: 38 mm, pipe diameter (max.): 38 mm, PRODUCT (PROFILE, TUBE) .. external diameter min.: 11 mm Tedjxm Ru Njpfx Ahusf .. external diameter max.: 38 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 2 mm LINE CHARACTERISTICS .. welding process: HF inductive .. sawing process: travelling .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS .. mains power supply: 440 kVA For sale is a fully serviced and excellently maintained tube welding line . The line was previously used for the production of USM Haller furniture tubes, but it is designed for a wide range of tube diameters, making it highly versatile for different manufacturing requirements. Welding is carried out with an induction HF system from EFD Induction, built in 2018, ensuring a modern and efficient welding process. Total line length: approx. 100 m Operation: handled by 7 operators Condition: well-maintained, fully operational Scope of delivery: complete package An excellent opportunity for companies looking for a reliable and high-performance tube welding line.

Condition: new, Year of construction: 2022, functionality: fully functional, Item: A-Aalborg-Micro Tsdpfeqy Nv Rex Ahuof AALBORG MICRO The Aalborg Micro is a compact exhaust gas heat exchanger/steam generator, designed for waste heat recovery from gas/MDO/HFO engines and gas turbines. As a heat exchanger, the Aalborg Micro offers a wide range of opportunities, due to the fact that hot water, TEG and TFO can all be used as media. Furthermore the Aalborg Micro can be used as a steam generator. A cylindrical unit in the center with an integrated regulation damper allows up to 80% of the exhaust gas to bypass the heating surface. The heating surface can be cleaned easily via optional soot blower rings using compressed air/steam/water, and/or by a pyrolysis process in dry-run mode

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) Tedpfx Aexz Ahwohujf - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Year of construction: 2010, condition: ready for operation (used), Movement X-Axis Movement 6500 mm Tsdexuw Dgopfx Ahuef This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. Application Types Cutting

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg BLM bar loader BLM CARM 7 Todpfxjqy E R To Ahuef Serial number: 340380106175 Year of construction: 2008 Weight kg: 650 With conveyor belt Without protective grid

Condition: ready for operation (used), total length: 900 mm, total width: 400 mm, total height: 1,100 mm, empty load weight: 140 kg, gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm Tedpfxoxllirj Ahuof roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 2,5 rpm video klik hier Motor power: 1,5 kWt

Year of construction: 2018, condition: used, controller manufacturer: SIEMENS, controller model: 15 13F-1 PN, CONTROLS .. SIEMENS 15 13F-1 PN 1. General Description The draw-oil preparation system is designed for the optimal treatment of un-drawn tubes prior to the drawing process. A large-volume draw-oil bath ensures homogeneous wetting of the tube surface, providing uniform lubrication, reducing friction during drawing, improving the tube surface quality, and increasing tool lifetime. A constant material flow as well as stable bath temperature and bath quality make this system a critical process step in efficient tube production. _____ 2. Performance Data & Capacities • Tube diameter range: 18–75 mm • Bundle weight: maximum 5 t • Maximum tube length: 9 m • Bath volume: 20 m³ • Electrical supply: 400 V / 180 A / 50 Hz • Operation mode: Semi-automatic _____ 3. Functional Principle Immersion Bath & Medium Conditioning • Uniform lubrication through full immersion in the draw-oil bath • Tubes integrated in the tank walls serve for oil heating via the furnace heat-recovery system • Oil circulation: Chemetall process, 12 cycles per hour • Prevention of water pockets: Precise water dosing; compressed-air injection if required • Bath composition control: Regular sampling • Dosing station: Automatic adjustment of oil and water additives _____ 4. Measurement & Control Parameters The following process parameters can be monitored and controlled: • Immersion time • Drip-off time & park time at all 3 drip stations • Crane inclination during immersion • X and Y axis positions • Crane speeds • Cycle types: Mix, Activate/Deactivate, Automatic, Pause, Cycle, Cycle interruption _____ 5. Control System & Safety • Siemens PLC: CPU 1513F-1 PN • Software: TIA Portal V15.1 • HMI: Siemens TP1200 Comfort Panel • Safety concept: Complete risk assessment available • Includes control cabinet, electrical documentation and software backup _____ 6. Automatic Overhead Crane • Type: Matr. 2981 t.6.5 Tsdpoxwkytjfx Ahujf • Travel speed: up to 40 m/min • Class: A6 (FEM 1.001 – ISO) • Wheels: 4 pieces, Ø 315 mm • Track gauge: 13,000 mm • Weight: 8,000 kg • Motor: FC90LFECCL-4, 1.5 kW, IP55 • Brake: Disc brake, DC 400 V • Gearbox: TP 315/90BR, ratio 1/35 _____ 7. Components Included in the System • Loading cart • Immersion tank • Medium circulation pump • Portal crane / automatic overhead crane • Drip-off station • Unloading cart • Extraction system • Dosing unit • Control cabinet & operator panel _____ 8. Documentation • Operating manual • User manual • Electrical & control diagrams • Declaration of conformity • Software backup

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 600 h, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending radius (max.): 96 mm, mandrel length: 4,500 mm, overall weight: 1,000 kg, For sale is a pipe bending machine, purchased in 2021 and used for only two years. Since then, it has been stored in a dry warehouse. It can bend pipes with a diameter from 12 mm to 48.3 mm and a wall thickness of 4.5 mm. Dies/jaws and mandrels for steel and stainless steel pipes are included. Self-collection required upon sale. Tjdpfxexvhm Io Ahuef

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Tedpfx Aexz Ag Hjhujf Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-90 A Technical Specifications Max. Tube Diameter (mild steel): 90 mm Max. Tube Wall Thickness (mm): 4 Max. Bending Angle (°): 190 Tube Bending Rate (d/min): 3-6 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Loading Length (mm): 3000 Bending Motor Power (kW): 15 Hydraulic Motor Power (kW): 5.5 Tedpfx Ajxvzurjhuof Machine Width (mm): 1400 Machine Length (mm): 4500 Machine Height (mm): 1600 Machine Weight (kg): 3000 Features • On our standard NC machines, the distance and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend more quickly and accurately by monitoring the progress and rotational positions of the bends carried out with our machines equipped with the NC Car System.

Year of construction: 2019, condition: ready for operation (used), This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine. Application Types Tsdpfx Ajxmbxrjhusf Cutting

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 6,000 mm, positioning speed: 100 m/min, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, fume extraction, nozzle changer, safety light barrier, 3 Chuck Professional pipe laser cutting machine (GS-6022HG) Working area (L/W): 6000mm*φ220mm Repeat positioning accuracy: ≤0.03mm Max. positioning speed: 100m/min Max. acceleration: 1.0G Max. rotating speed of chuck: 110r/min Machine weight: 10T Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Tjdpfxevrwt To Ahusf Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm Supports high-precision cutting of round tubes, square tubes and special-shaped tubes. Flexibly adapts to different specifications of tubes.

Condition: ready for operation (used), Year of construction: 2025, operating hours: 100 h, functionality: not functional, machine/vehicle number: MB 123602560, pressure: 10,200.2 bar, control cabinet height: 100 mm, control cabinet length: 100 mm, control cabinet width: 100 mm, power: 100 kW (135.96 HP), operating pressure: 1,003 bar, temperature: 100 °C, operating temperature: 100 °C, total height: 100 mm, total length: 100 mm, nominal heat output: 100 kW (135.96 HP), total width: 100 mm, nominal power (apparent): 100 kVA, nominal power: 100 kW (135.96 HP), insulation thickness: 100 mm, insulation material: 100, tank capacity: 100 l, manhole location: side, empty load weight: 100 kg, type of input current: AC, warranty duration: 100 months, Equipment: ABS, AdBlue, Baston used - Arcade Original - Passion used - Baston Arcade Tedpoxu Rynjfx Ahujf

Year of construction: 1984, condition: used, GENERAL INFORMATION Heat exchange area: 8.5 m² Year of manufacture: 1984 Outside diameter: 350 mm Inside diameter: 270 mm Total length: 2,090 mm Insulation: available Other information: 2 tubes of the tube bundle were welded shut by the previous operator; baffle plate in the front head has detached from the weld seam and must be rewelded by the buyer before commissioning (see photos). Location: Bremen Todpoxqclzofx Ahuef Nameplate: Condition: used Previous application: brewery INSULATION Insulation jacket material: stainless steel SHELL SIDE Shell side volume / liters: 54 liters TUBE SIDE Tube side volume / liters: 22 liters Max. allowable operating overpressure shell side / bar: 15.0 bar Max. allowable operating temperature shell side / °C: 170 °C Max. allowable operating temperature tube side / °C: 170 °C Max. allowable operating overpressure tube side / bar: 4.0 bar

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, pipe diameter (max.): 168 mm, bending angle (max.): 190 °, Tube diameter: 168.3 x 11 mm Tube insertion length: 6000 mm Max. bending radius: 700 mm Control system: Siemens 840 D Min. bending radius: 80 mm Max. bending angle +/-: 190° Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are available: Todpfx Aoxz Aamjhusf Tube Ø 48.3 mm; radius 105 mm Tube Ø 60.3 mm; radius 120 mm Tube Ø 63.5 mm; radius 150 mm Tube Ø 76.1 mm; radius 190 mm Tube Ø 88.9 mm; radius 222 mm Tube Ø 114.3 mm; radius 285 mm Tube Ø 139.7 mm; radius 350 mm Tube Ø 141.3 mm; radius 700 mm Tube Ø 168.3 mm; radius 420 mm There were a few mandrels with direct engravings indicating their specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following mandrel outer diameters were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package has an estimated value of approx. €150,000.

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-65 A Technical Specifications Max. tube diameter (mild steel) 63 mm Max. wall thickness (mm) 3 Max. bending angle (°) 190 Tube bending speed (d/min) 7-10 Max. hydraulic pressure (bar) 200 Tsdsxvzt Ujpfx Ahuof Max. bending radius (mm) 250 Min. bending radius (mm) 45 Tube length (mm) 4000 Bending tolerances (mm) ±0.25 mm Bending motor power (kW) 7.5 Hydraulic motor power (kW) 4 Oil tank capacity (l) 50 Machine width (mm) 1500 Machine length (mm) 6200 Machine height (mm) 1500 Machine weight (kg) 2000 Features • The machine is equipped with 5 cylinders • On our standard NC machines, positioning and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend faster and error-free by monitoring the progress and rotational positions of bends carried out with our machines equipped with an NC Car System.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" Todpfx Ajttah Rshuef → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: excellent (used), Year of construction: 2021, Trumpf TruLaser Tube 3000 (2021) 2000W Manufacturer: Trumpf Model: TruLaser Tube 3000 Condition: used, as new Tjdoxrpb Eopfx Ahuef

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, Gunzenhausen Type: UL-S 1250 Output: 1,000 kg/h Permissible operating pressure: 13 bar Tjdpfxjxnxflo Ahuof Increased test pressure: 24.7 bar Total water capacity approx.: 2,320 l Year of manufacture: 10 / 2006 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner GL5/1-D/ZMD, separate control cabinet, feedwater pump, and the existing coarse and fine fittings.

Condition: used, GENERAL Remarks: Pipe wall thickness 2 mm (1.7 mm in bend areas); 6 height-adjustable feet; minor dents in the insulation jacket; insulation jacket is missing in 2 sections (see photos) Overall width: 1,550 mm Overall height: 3,200 mm Overall length: 6,530 mm Insulation: available Miscellaneous: 8 minutes hot holding Pipes DN 80 Length: 647 meters Manufacturer: Tetra Pak Approx. weight: 7 t Location: Bremen Condition: used Last application: dairy Tjdpfx Ahsxqclnsuof INSULATION Insulation jacket material: stainless steel PIPEWORK Pipe material: AISI304 (V2A) 1.4301

Condition: new, Cesurbend CNC Tube and Pipe Bending Machine PBNC-51 A Tedpfx Ahoxvzr Reujf Technical Specifications Max. Tube Diameter (Mild Steel): 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Speed (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 4000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1300 Machine Length (mm): 5750 Machine Height (mm): 1500 Machine Weight (kg): 2000 Features • On our standard NC machines, distance and rotation after bending are handled via operator assistance and parallelism devices. • Using our machines equipped with the NC Car System, you can monitor bend progress and rotational positions, enabling faster and error-free bending.

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support Tedpfjg Dvdcjx Ahuef - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 used steam boiler ----- Todpfxsxnxdhe Ahuef - mounted on frame - - with integrated economizer - Manufacturer: LOOS, Gunzenhausen Type: UL-S 3200 Output: 3,200 kg/h Permissible operating pressure: 13 bar Increased test pressure: 24.7 bar Total water content, approx.: 4,830 l Year of manufacture: 10 / 2006 CE marking: CE 0036 Equipped with Weishaupt gas-/oil burner GL9/1-D/TMD, separate control cabinet, feed water pump, and existing coarse and fine fittings. Integrated economizer type Eco1: Permissible max. pressure: 31 bar Test pressure: 56 bar Permissible max. temperature: 238°C Thermal output: 124 kW Total volume: 81 ltr

Year of construction: 2006, condition: used, GENERAL Exchange surface: 24.7 m² Year of manufacture: 2006 Internal diameter: 508 mm Total height: 1,340 mm Overall length: 3,270 mm Location: Bremen Tjdpfxsxqch Ns Ahujf Technical documentation: Drawing, TÜV certificates, Inspection certificate, CE marking and Declaration of Conformity Nameplate: Condition: used Last application: Methanol condenser SHELL SIDE Shell side volume / liters: 390 liters TUBE SIDE Tube side volume / liters: 150 liters Shell material: AISI316 (V4A) 1.4571 Tube material: AISI316 (V4A) 1.4571 Number of tubes: 63 Max. allowable operating overpressure shell side / bar: 0.49 bar Tube diameter / mm: 25 mm Max. allowable operating temperature shell side / °C: 100 °C Max. allowable operating temperature tube side / °C: 100 °C Max. allowable operating overpressure tube side / bar: 6.0 bar