Used Bmo Automation for sale (10,977)

Condition: excellent (used), Year of construction: 2009, Robot Bsdpfsff Hdtox Abbslr GHS-Automatio Type: SL 25/Easycontrol Year 2009 Electric Box

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, total length: 14,759 mm, total width: 7,014 mm, total height: 4,314 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, noise level: 85 dB, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Blodpfxexlc H Uj Abbjr The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects

Condition: new, functionality: fully functional, Deutschmann Automation Unigate CL-PBDPV1 CL profibus. Complete PROFIBUS-DP-Slave interface Automatical Baud rate recognition (9600 bit/s - 12 Mbit/s) DPV0 and DPV1 supported Isolated PROFIBUS interface with 9-pin. D-sub connector PROFIBUS address adjustable via rotary switch Bedpfx Asv N Ru Eobbjlr Up to 244 Bytes input- and 244 Bytes ouput data (total data length 488 Bytes) Good working condition. Please check out our other listings as well.

Condition: new, B&r ps 794 power supply module b&r br-automation 2005 ps 794 Bsdpfoh Ruldox Abbslr 0gh-ps794 5vdc 24vdc input: 230v ac, 0.4a 8-30vdc weight: 620 gm

Condition: new, Year of construction: 2019, functionality: fully functional, overall weight: 390 kg, Our company purchased SMD placement machines from TWS AUTOMATION srl's Hungarian distributor, Microdolder Kft. These include the SR-3200 EVO automatic stencil printer and the ULD100 panel output and input feeder for the SR3200 stencil printer, which have not been used to this day. We are adding the TWS100 "Auto-balance" 4-sided stretchable frame for stencil plates and WS-52 Stencil plate storage to the stencil printer. The machines are brand new, never used because we did not need them. Bljdpfjvuwfzsx Abbjr The tools shown in the photos belong together and we intend to sell them as a package. Machines for sale: SR-3200 EVO automatic stencil printer 1 pc ULD100 panel output and input feeder for SR3200 stencil printer 1 pc TWS100 "Auto-balance" 4-sided stretchable frame for stencil plates 1 pc TWS-52 Stencil plate storage, for storing 80 stencils, 1 complete set The machines are brand new and have not been used The tools shown in the photos belong together and we intend to sell them as a package.

Condition: new, Year of construction: 2025, functionality: fully functional, This packaging system is used to pack food and non food products in different forms: powder, granular, solid irregular shapes and liquids. Machine is composed by a feeding elevator that gently lifts the products, elevator can be with plastic cups in Z shape or with PU or PVC belt having stainless steel structure or can be used an auger elevator for granular or dusty products. The product is fed to a multi head weighter having 10 , 14, 28 weighting modules. The weighter stands on a special design stainless steel platform to reduce the vibration. The packing machine is able to work with different thickness film, different film width and different materials (PE/PE/BOPP/Paper/Aluminum/Nylon) and produces the following bags: pillow, pillow with gusset, block back, quad seal bag and with eurohole option. The movement is performed by servo motors and all the controls parameters are adjusted by touch screen, all the electrical components are from brand name manufacturers like Omron and Siemens. Productivity from 25-80 bags/minute depending on the weight and volume. This packaging system can be upgraded with the product exit conveyer, labeling machine to place label on the bags, vibratory feeder for soft products, date and lot printer, gas injection, free flow metal detector for food products, rotary table to accumulate the bags. Bodpfx Ajvld N Uebbelr

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 48 h, machine/vehicle number: BD38CNCOMPACT, Max. pipe OD 38mm CNC control Bsdpfjvu R Amox Abbolr Compact Model

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fully automated robotic cells for different industries having main components: product preparing / aligning belt, Fanuc robot unit (different type based on application requirement), robot stand, robot gripper, roller / belt conveyor for final product. Machines are controlled by HMI interface no need to know robot programming code to operate the machines. We develop applications for staking, transferring , palletizing, sorting, pick and place, group and insert into boxes for bags, buckets, bottles, boxes, cans,etc. Bodpsuvg Ahsfx Abbolr Each robotic cell can be upgraded with industrial vision system , labeling systems, marking systems and also software for monitoring production.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, machine/vehicle number: HS-40A, controller model: auto or semi-auto, Technical Parameter Description of Steel Pipe Sealing Machine HS-40A Automatic Heating Sealing Machine. Its main features are as follows: This full - automatic heating sealing machine is equipped with a Kewei intelligent controller and a touch - screen for control, hydraulically driven, with high - frequency heating, and features man - machine interactive operation. The setting input is simple and convenient. It allows for arbitrary selection and automatic conversion between manual and automatic modes. The movable switch button has two functions: sealing and positioning. It has high safety and a counting function, enabling one - time forming of the seal. The overall machine has stable performance and high efficiency, making it an ideal equipment in the pipe - fitting sealing processing industry. A high - efficiency hydraulic cylinder drives the rack, and the gear rotates to achieve sealing. The specially designed fixture has strong and reliable clamping force, ensuring safety without damaging the surface of the workpiece. The coolant circulates automatically to ensure the long - term operation of the equipment. Sealing capacity (steel, stainless steel, alloy materials, etc.). Note: Tests are required for different pipe - fitting materials. HS-40A Automatic Heating Sealing Machine include: 1. Equipment Instruction Manual. 2. Equipment Operation and Debugging Instruction Manual. 3. Maintenance Record Sheet. Blodpfovu Ryfjx Abber It takes about 30 - 40 seconds for spinning both ends of one product. The wall thickness of the pipe is 1.0 - 2.5mm. The length of the pipe is 50 - 600mm.

Condition: new, Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Full Automatic or Semi-Automatic CNC bending and sawing machines Bedpfx Abjvl S Dgjbslr Pipe size from dia. 6.0-150.0mm CNC bending, Shrinking, Sawing machinery, customerzied design available New machine stocks for sale listing price is for 2.5inch pipe type60nc bending

Condition: like new (used), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Bljdpfjvl Ewmex Abbjr Overlay welding for Ball, Valve, Flange face, RTJ groove, Bevel etc. One touch, More Welding Solutions, New stocks for sale!!

Year of construction: 2006, condition: ready for operation (used), Control Unit Blodpfsxq Ht Ajx Abber Brand OKUMA Model OSP-P200L This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), functionality: fully functional, input voltage: 240 V, protection type (IP code): IP65, Process Controllers – HACH LANGE SC100 / SC60 Manufacturer / Model: HACH LANGE – SC100 / SC60 Application: Measurement and control of industrial water-quality sensors: pH, ORP, conductivity, dissolved oxygen (DO), chlorine (Cl₂), turbidity (NTU), etc. Technical Data: Power supply: 100–240 V AC Display: LCD Outputs: 0/4–20 mA, relay outputs Bsdpfxexzgn Us Abbjlr Communication: RS485 Modbus Protection class: IP65 Operating temperature: –20…+60 °C Condition: Good working condition. Screens intact, housings clean, connectors in place. Suitable for reuse in water treatment plants, chemical dosing systems, boiler feedwater lines, emissions monitoring, and general industrial process control.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 203214, workpiece weight (max.): 2 kg, spindle speed (max.): 3,700 rpm, workpiece diameter (max.): 150 mm, empty load weight: 1,579 kg, TECHNICAL DETAILS Bjdpfx Aoxxkfxebbslr Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2 kg Spindle speed range: 250 to 3,700 rpm Standard speed range: 20 to 1,000 rpm Stroke speed range: 33 to 500 strokes/min Tools Krossgrinding tools: 5.46 to 32 mm TurboHone tools: 3.81 to 32 mm Connecting rod tools: 53.8 to 63.8 mm Larger tools: 25.4 to 101.6 mm MACHINE DETAILS Coolant system Pump motor power: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l Air pressure requirements: 566 l/min at 4.48 bar Recommended air pressure: 5.52 bar Temperature range: 0 to 35 °C Noise emissions: < 71 dB (A) continuous, < 75 dB (A) peak Dimensions & Weight Dimensions (L x W x H): 2,946 x 2,971 x 1,829 mm Net weight: 1,579 kg Required footprint thickness: Minimum 150 mm EQUIPMENT Automatic setup (spindle speed, stroke speed, stroke length, feed rate, spark-out) Automatic finish machining Machine operating modes: Automatic, Manual Series production Single-item production Optional clamping

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, turning diameter over cross slide: 290 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 23 m/min, rapid traverse Z-axis: 30 m/min, spindle nose: FL 140h5, overall weight: 4,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CTX alpha 500 V5 from 2015 is in very good condition and has 7,040 spindle hours on the clock. In 2020, the machine was fitted with a BMO automation system, type Iridium Ir 25F, but it has seen little production since then. The machine is very well equipped and has recently been fully professionally cleaned. This CTX alpha 500 is equipped with: - BMO Iridium Ir25F automation (2020) - LNS Quick Load Servo III bar feeder (2016) - Schunk Rota THW plus power chuck with quick-change jaw system - Various additional jaws - DMG CELOS software - Chip conveyor - Workpiece catcher/ejector - Tool measuring arm - Foot pedal for clamping/unclamping chuck - Various tooling (driven & static) Blsdjx Ah Ryepfx Abbjr - All original documentation in German

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 rpm Tool taper SK 40 Additional Equipment Tool Magazine: Additional magazine ZM157 Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters Rotating Transparent Window: Available Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex Bsdoxn U Ayopfx Abbelr This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, machine/vehicle number: 008272, Position 1: 5 Axis CNC Routers BIESSE + KUKA-ROVER A + KR210 R3100 Position 2: Robot BIESSE + KUKA-ROVER A + KR210 R3100 Bodpfox A Tfvox Abbjlr

Condition: good (used), Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, chuck outer diameter: 250 mm, feed length X-axis: 680 mm, feed length Z-axis: 200 mm, power: 39 kW (53.03 HP), rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, controller manufacturer: Siemens, controller model: 840 DS, input voltage: 400 V, coolant supply: 6 bar, nominal power (apparent): 45 kVA, Equipment: rotational speed infinitely variable, type plate available, EMAG VERTICAL SINGLE-SPINDLE TURNING AND GRINDING CENTER EMAG - REINECKER VSC 250 DS Used, year of manufacture 2015 Control: Siemens 840 DS Condition: Used machine in good condition Operating hours (approx.): 35,000 Program run time (approx.): 22,000 hours Operating voltage: 400V Air connection: 6 bar Total power requirement: approx. 45 kVA Cooling unit: water/water Machine dimensions without peripherals (L x W x H): approx. 3200 x 1900 x 2650 mm CYLINDRICAL GRINDING Blsdpfx Abolfduijbor Integrated motor grinding spindle with max. speed 45,000 rpm and max. output 18 kW Touch dressing for ceramic CBN grinding wheels Vertical CNC turning and grinding center Automation / Gantry: EKF basket stacker cell as raw/finished parts buffer for baskets 400 x 600 mm on floor rollers 3 basket stacks enable uninterrupted operation even during basket changes, loading/unloading via loading gantry The machine is well-maintained and EMAG serviced. The production process includes pre- and finish machining of the bore and end faces by hard turning the face surfaces, as well as turning the diameter/bore followed by bore grinding. No driven tools Viewing under power is possible by appointment. Dismantling and loading of the equipment are to be carried out by the buyer. Price and further details on request / special price All technical details subject to error/typos. Sale only within EU countries.

Condition: used, Year of construction: 2002, Weiler E90 / 4.5M - CNC Lathe with Cycle Automation - Weiler D2 cycle control - Chip conveyor - Approx. 15 pcs. Multifix quick-change toolholders - 1 live centre - Regular servicing by Weiler - Supplied without chuck, without steadies - Year of manufacture: 2002 Technical Data Working Area: - Distance between centres: 4500 mm - Centre height: 450 mm - Swing diameter over bed: 900 mm - Swing diameter over cross slide: 530 mm - Bed width: 600 mm - Travel of cross slide: 590 mm - Travel of top slide: 250 mm - Cross slide length: 1230 mm - Cross slide width: 345 mm - Saddle guideway length: 860 mm - Tool shank cross-section (height/width): 40 x 40 mm Spindle: - Spindle nose according to DIN 55027 / 55026 size: 11 - Spindle diameter in front bearing: 178 mm - Spindle bore: 128 mm - Main spindle internal taper, metric: 140 mm Main Drive: - Spindle nose according to DIN 55027 size: 11 - Total speed range: 1 - 1120 rpm Bsdpfsxn Rr Rsx Abbjlr - Speed range gear stage I: 1 - 350 rpm - Speed range gear stage II: 4 - 1120 rpm - Drive power at 60%/100% duty cycle: 45 / 37 kW - Max. torque at spindle: 6000 Nm Feed Drive: - Feed range Z/X: 0 - 20 mm/rev - Feed force Z/X: 20 kN - Rapid traverse speed Z/X: 7 / 3.5 m/min Tailstock: - Quill diameter: 140 mm - Quill stroke: 300 mm - Quill internal taper: MK 6 Thread Cutting Range: - Metric threads: 0.1 - 400 mm - Inch threads: 1/4 - 56 TPI - Module threads: 0.125 - 28 mm - DP threads: 1 - 224 DP Connection Data: - Operating voltage: 400 V - Control voltage: 24 / 230 V - Connected load: 55 kW - Rated current: 85 A Machine Dimensions: - Total length: 6900 mm - Total width: 2600 mm - Total height: 2120 mm - Machine weight: 10,500 kg

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: AAY366, overall weight: 900 kg, Equipment: type plate available, We are selling our EROWA as it is now surplus to requirements. It was previously connected to our DMG65H and functioned perfectly. The robot has been updated to the latest version of the software. Clamping devices can be included by agreement. The machine is currently in storage and has been disconnected by an Erowa technician. All manuals and documentation are available. Interface specification is available. Bodpfxexuh Ddj Abbslr

Condition: new, Schneider Automation TSX A25 KPE 141-1 MMS Ethernet controller, E status and serial no. according to photo, unused in opened original packaging, 100% functional, scope of delivery according to photos Bjdji Ec Hzepfx Abbjlr

Year of construction: 2019, condition: ready for operation (used), This TGT Robby 900 XL was manufactured in 2019. It features a Palfinger crane 1500, a forklift lift of 1.8 m, and a Honda engine. The machine is installed on a crawler chassis with a telescopic width and offers a working height of approximately 6.5 m. It has a crane load capacity of up to 900 kg and a fork load capacity of 2000 kg. Contact us for more information about this machine. Application Types Other Automation Equipment Bljdpfxexyl Nbj Abbsr

Condition: ready for operation (used), HSB Automation Beta 60-SSS-M-2005-400-680-2ES2-4BL-0 Mechanical linear unit, damage see photo, serial number as per photo, used, heavy signs of wear, 100% functional, scope of delivery as per photos Bljdpfx Abji Ea Rkober

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 2030mm Measurements depth 4040mm This TRUMPF STOPA LiftMasterCompact was manufactured in 2015. It is a robust automation system designed for efficient material handling and storage. Ideal for streamlining operations in various industrial environments. Contact us for more information about this machine. Application Types Bljdpfxjxxdq Ie Abbsr Other Automation Equipment

Condition: ready for operation (used), Year of construction: 2001, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Spindle speed range 15000 Number of axis 5 Movement X-Axis Feed Force 30000 m/min Y-Axis Feed Force 30000 m/min Z-Axis Feed Force 30000 m/min Media Chip conveyor Yes Additional Equipment Oil mist extraction Blodpsxvfimofx Abbsr Electronic handwheel Chip flushing gun Machine bed flushing NC swivel table Blow-off device Closed roof 200-liter coolant tank Includes 24 pallets and MTS-Chuck S-P/A clamping device. This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, extended X-axis of 2010 mm, C-axis rotary table, spindle speed up to 15,000 rpm, and a 30 tool capacity. Includes a chip conveyor and a 200-liter coolant tank. If you are looking to get high-quality automation capabilities consider the HERMLE C 600-U machine we have for sale. Contact us for more information about this machine. Application Types Milling