Used Bmo Automation for sale (10,981)

Condition: good (used), Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, steep conveyor, steep conveyor belt, slat conveyor belt -Manufacturer: FAPRO Autumation, conveyor belt slat conveyor belt on a mobile base frame -Speed: 12 m/min -Conveyor belt width: 600 mm -Conveyor belt length: 2570 mm, dimensions see technical photo. drawing -Outlet height: 1225 mm -Transport dimensions: 2600/690/H1225 mm Bsdpfopix Nyox Abbslr -Weight: 120 kg

Condition: like new (used), Year of construction: 2023, operating hours: 27 h, functionality: fully functional, machine/vehicle number: PA8050V3, feed length X-axis: 800 mm, feed length Y-axis: 480 mm, feed length Z-axis: 200 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 200 mm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 9 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 24,000 rpm, rapid traverse X-axis: 24,000 m/min, table width: 800 mm, table height: 500 mm, type of input current: three-phase, total height: 1,800 mm, total length: 1,250 mm, total width: 1,050 mm, overall weight: 120 kg, CNC milling machine for metal and wood processing including extraction system, computer, and CondaCam OEM full version Blsdpfsxbqtbjx Abbor

Condition: good (used), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler(interlock). The doors are locked in automatic mode and can only be opened in automatic mode or in manual mode after pressing the Doors button on the control panel. Automatic mode cannot be started when the door is open. Function sequence The station is loaded with the pre-assembled module via the transfer conveyor. The operating steps of the automatic station with the passage of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning of the WT with the preassembled assembly in St.2.1 - Lowering of the beam with the scanners and the vision sensor - Scanning of the 3 codes (front panel, front LP, SD LP), comparison with the database - Checking the correct latching of the FFC in the connector - Lifting the carrier and lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in St.2.2 - Positioning of the screwdriver and screwing of the front LP - Lowering the WT onto the belt Blodpjibichofx Abbsr - Positioning of the WT with the pre-assembled assembly in pc.2.3 - Lowering of the light protection cover and contacting, positioning of the carrier with the test sensors from below - type-dependent testing of the SD + CD lighting slots and pushbuttons - Function test CD eject button - Lowering the WT onto the conveyor > continue If faults occur during the test, they are indicated on the display and can be rectified if possible. To do this, switch to manual mode and open the doors. After the repair and starting of the automatic system, the WT is tested again in the station. If no repair is possible (e.g. screw fault), the WT is marked as NOK in the control system and is not processed further. Manual NOK marking and ejection is also possible.

Condition: used, Stöger Automation PESCE S&S bowl feeder 230V Blsdpswcar Ssfx Abbor

Year of construction: 1996, condition: ready for operation (used), X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Blodpew U Dwbofx Abber

Condition: used, Stainless Steel Vibrating Feeder with Hopper. Hopper is 80x 60 cm on the top. Feeding pan is 80 cm long and 30 cm wide. Bljdpfx Asun I Nyebbsr

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available Bodpfxewkqmij Abbjlr -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Robust container rotating device from Key Plant Automation (made in Great Britain) with a total load capacity of 3,000 kg. Continuously variable rotation speed. Suitable for component diameters from 100 to 1,400 mm. Included in delivery: Double foot pedal for right/left rotation with start/stop functionality. Blsdpswaidrofx Abbsr Machine is also available for rental. See data sheet for further information. We would be happy to deliver the machine to you at a cost.

Condition: good (used), The following components from B&R Automation are for sale: Bsdort T Awepfx Abbjlr - Power Panel 120 - CPU CP476 Both were removed in 08/2022 and have worked without any problems to date.

Year of construction: 2021, condition: like new (used), AVEREX HS-540i GTS Horizontal machining center with 8 pallets Control system - Fanuc M-Pro1 (0i-MF) - 10,4" color LCD - NC memory with 512 KB - AICC II Control with 200 blocks readable in advance - Ethernet and USB Device - Electronic handwheel - Weekly timer: Auto. Power On/Off of the machine - High Speed Skip - Manual Guide 0i - 54 (6+48) pairs of workpiece zero points - Tool Offset Memory C - 400 pairs of tool offsets - 400 storable programs - High Speed Skip Signal - Programmable spindle load monitoring - Tool Life Management - Advanced macro variables (#500-#999) - Program Restart - Helical Interpolation, Cylinder Jacket Interpolation - Drilling cycles, rigid tapping - Scaling, Mirroring, - Polar Coordinates Programming - Corner chamfering / Corner rounding - Blanking sets, up to 9 different - Customer macro "B Travels - travels X/Y/Z: 800/800/800 mm - spindle center to pallet surface: 30 - 830 mm - spindle nose to pallet center: 100 - 900 mm - travels B: 0-360 ° Speeds - rapid traverse X/Y/Z: 74/74/74 m/min - feed rate during milling: 0 - 40.000 mm/min - rapid traverse B: 66.6 rpm - 1G+ acceleration Pallet changer - rotary changer - number of pallets: 2 - pallet size 500 x 500 mm - Load capacity: 500 kg per pallet - workpiece size: Ø800 x H1.000 mm - Mechanical locking of the pallet clamping device - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,099 mm Tool changer - Tool holder: BBT 40 (SK 40 and HSK 63 optional) - Number of magazine positions: 80 - Max. Tool diameter: Ø95 mm - Max. tool diameter Max. tool diameter with free neighboring places: Ø185 mm - Max. length: 400 mm - Max. Tool weight: 8 kg - Type: fixed station/chaotic table Bedpfjh Iy Snex Abbolr - Speed: 16 sec. for 80 tools - Tool change time: 0,9 sec./2,1 sec. (heavy tool) - Chip to chip time: 3.0 sec./3.5 sec. (heavy tool) Spindle - Spindle Taper: BBT 40 Big Plus™ - Speed: 15,000 rpm - Drive power: 37 kW - Torque: 249 Nm up to 1,150 rpm - Compressed air through and at the spindle - Bearing diameter: Ø71 mm - lubrication: oil / air - oil cooler Rotary axis - Axis: Full 4th axis - 66.6 rpm - Indexing: 0.001 - Clamping force: 5.000 Nm - Holding force: 1.973 Nm Linear guides - Manufacturer: THK - width: 45 mm - guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball screw - Manufacturer: TSUBAKI - Diameter: 40 mm - Internal cooling: Yes, temperature controlled - Feed forces X/Y/Z: 13.500 Nm - Lubrication: Oil / Air Coolant management - Coolant system incl. tank 550 liters and pumps - Chip spirals on the right and left side of the machine - Coolant through the spindle, 30 bar, incl. preparation for 70 bar - Coolant shower - oil skimmer Accuracies - positioning accuracy: ± 0,005mm - Repeating accuracy: ± 0,0025 mm Other - Adjustable thermal compensation of spindle and motor flanges - Central lubrication oil / air - CE - 50 kvA transformer Dimensions (APC 2 / 80 or 120 tools) - Machine size: 4.914 x 2.660 x 2.632 mm - Footprint: 4.914 x 3.880 x 2.632 mm - Machine weight: approx. 12,960 kg - Dual chip conveyor (combination hinged and scraper belt) - Magazine capacity increased from 80 (standard) to 120 ex works - BLUM TC50 probe with infrared transmission System for

Year of construction: 1999, condition: ready for operation (used), X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Bedsw U Dwhopfx Abbelr

Condition: ready for operation (used), From 2016. Complete and ready to be used. Comed with six months warranty. Bledpfovrqbkex Abbsr

Year of construction: 2023, condition: new, Here we offer a machine that was specially developed for fixing loose or cracked branches. The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement • Easiest operation DIAGNOSIS AND CORRECTION • Rotten branches • torn branches • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process Blsdpspiufwsfx Abber The system can be viewed and tested by arrangement in 77866 Rheinau.

Condition: new, Year of construction: 2025, Robot cell for pallet making Ekatech Automation AB Robot Nailer 4017 Bsdpfx Abjq Iv Edjbolr

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total width: 2,600 mm, Winding/Unwinding Station with Motor Drive Unwinding width: max. 2600mm Unwinding/rewinding via sensor (dancer control) Winding diameter/roll diameter: max. 1200mm Double-sided folding bearings With clamping shaft for 3"/76mm diameter Winding direction switchable left/right Winding speed adjustable via rotary knob Robust welded frame, powder-coated, winder on castors Bjdpfx Abewy H Dvjbjlr Regulated drive of the clamping shaft via geared motor and frequency inverter Fully functional. Can be inspected if required.

Year of construction: 2022, condition: new, we offer you our oil cooler to reduce the cutting oil temprature at CNC Turning Machine. Blsdelzghpepfx Abbor if you have some question please let us know.

Year of construction: 2001, condition: ready for operation (used), Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods. Blsdpfx Abetqtw Uober

Condition: used, Year of construction: 1996, Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Bledsk Abn Sspfx Abbjr Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 1994, condition: excellent (used), Description:-table diameter 1400 mm -Table load of Max 3000 kg -Belt width of 150 mm -Speed max. 25m / min -Belt thickness max. 1.2 mm Bledjd Iw U Ujpfx Abber Very compact and easy-to-use palette Unwinder diameter of turntable 1400 mm of more robust machine body with high capacity speed control of cam universally suitable for Multicoil

Year of construction: 2005, condition: not inspected (used), Shuttle conveyor (Traverser) Manufacturer: JOT Automation Overall dimensions: 3200 x 500 x 1000 mm Shuttle conveyor (Traverser) Used to transfer PCB's from one PCB production line into two PCB production lines from single track to dual track operated machines or vice versa. Bljdpeib H Tqefx Abbsr

Condition: ready for operation (used), Year of construction: 2012, This system consists of filling machine, screwing machine and the transfer from one to the other. Includes two HIBAR Pump 4S3-R2 high-precision dosing pumps and one as a spare part. Formats: 8ml-1000ml. A list of all formats on request. Documentation available. Glass container with pipette: volume: 8ml/28ml/30ml, base dimensions: 28mm/34mm x 34mm/35mm, height: 65mm/67mm/67mm, filling opening: 10mm/10mm/20mm. PET container with pipette: volume: 30ml/50ml/60ml, base dimensions: 32mm/37mm/38mm, height: 68mm/72mm/88mm, filling opening: 10mm/10mm/21mm. PE container with splash: volume: 250ml/1000ml, base dimensions: 56mm x 42mm/85mm x 69mm, height: 140mm/210mm, filling opening: 18mm/19mm. Documentation available. Bledpfx Aber Eqvhober

Year of construction: 2018, condition: ready for operation (used), Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the "Fiber Placement" process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site inspection is possible. Bljdpfsriurfsx Abbjr

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Bjdpsm Nckfsfx Abbelr

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Blodpfxem H Uqke Abbor

Condition: ready for operation (used), Year of construction: 2001, With documentation, an inspection is possible. Blsdef Ddrlspfx Abber