Used Blade Grinding Machine for sale (66,336)

Condition: repair required (used), Type AS - 900 Machine No. 74054 Centre distance 900 mm Centre height 150 mm Max. grinding wheel 400 x 80 x 127 mm Pgodpozw H I Tofx Ad Sor Centre height 150 mm Centre distance 900 mm ..... Condition: The machine cannot be switched on! The following applies to this machine: Condition unknown! Scope of delivery as per attached images ....

Condition: like new (used), Year of construction: 2022, functionality: limited functionality, grinding length: 450 mm, grinding width: 150 mm, table length: 450 mm, table load: 120 kg, table width: 150 mm, grinding spindle speed: 3,000 rpm, Surface Grinding Machine from Showroom (new) Manufacturer: Okamoto Model: ACC-450 AV (open design) Year of manufacture: 2022 Control: Okamoto FX Operating hours: 0 S/N: XXXX Technical specifications: ----- • Table size: 450x150 mm • Table travel longitudinal/cross: 530x165 mm • Max. table load: 120 kg • Max. grinding height table / new wheel: 397.5 mm • Standard magnetic chuck: 450x150 mm (P=13mm) • Automatic infeed: 0.0001–0.030 mm • Manual micro feed: 0.0001 / 0.001 / 0.01 mm • Spark-out strokes: 0–5 Pgedpfxex U Dawe Ad Ssr • Rapid traverse: 600 mm/min • Grinding wheel: 205 x 6–19 x 31.75 mm • Speed: 3,000 rpm • Grinding spindle motor: 1.5 kW • Connected load: 7 kVA • Dimensions: 2,000 x 1,430 x 2,265 mm • Machine weight: 1,250 kg Accessories: ----- • Grinding wheel on flange (new) • Paper band filter with 160 l tank • Table dresser + diamond • Work light • Tool kit • Operating manuals

Condition: used, center height: 100 mm, grinding length: 500 mm, Cylindrical grinding machine FORTUNA R 500 for sale. The machine was last operated in 2017 and has been stored in a warehouse since then. Therefore, it is being sold as defective – without warranty. Loading is possible. Pgjdpfxsxx T Ezo Ad Sjr

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: EB1507, grinding length: 600 mm, grinding width: 350 mm, total height: 1,900 mm, total length: 1,900 mm, total width: 1,900 mm, workpiece weight (max.): 320 kg, grinding height: 312 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 490 mm, table speed: 25,000 mm/min, table load: 320 kg, type of input current: three-phase, grinding wheel width: 25 mm, overall weight: 1,700 kg, grinding spindle motor power: 2,200 W, travel distance X-axis: 700 mm, travel distance Y-axis: 490 mm, travel distance Z-axis: 340 mm, rotational speed (max.): 1,500 rpm, grinding spindle speed: 1,500 rpm, input voltage: 400 V, Equipment: documentation/manual, - Factory number: EB 1507 - Automatic vertical feed - Headstock adjustment - Belt filter system - Coolant system - Machine light Grinding length 600 mm Grinding width 300 mm Workpiece height 312 mm Table size 600 x 300 mm Maximum workpiece weight 320 kg Distance grinding spindle center - table 490 mm Table travel, longitudinal 700 mm Table travel, transverse 340 mm Table feed rate 1 - 25 m/min Speed range - grinding wheel 1500 rpm Drive power - grinding motor 2.2 kW Grinding wheel dimensions 355 x 25 x 127 mm Magnetic chuck 610 x 305 mm Headstock adjustment device Operating voltage 400 V Total power consumption 3.0 kW Machine weight approx. 1.7 t Space requirement approx. 1.90 x 1.90 x 1.90 m Pedezrinlepfx Ad Segr Hydraulic unit 0.60 x 0.35 x 0.75 m Coolant system 0.70 x 0.40 x 0.80 m

Condition: ready for operation (used), functionality: fully functional, center height in crank: 125 mm, center height: 125 mm, grinding length: 600 mm, Distance between centers: 600 mm Height of centers (standard): 125 mm Speeds of the grinding spindle: 1500 / 1700 / 2200 / 3600 Grinding head swivels: 360° Pgodpfx Aszmhtvod Ser Transverse travel of the grinding head: 285 mm

Condition: used, functionality: unexamined, Hauser 3SM-DR jig grinding machine with a lot of accessories (photos) Pjdpfx Adey E Nilj Sogr

Condition: used, Brand and Model: ACME GOZUA RC 2-75 Type: CENTERLESS HYDRAULIC CYCLES Intermitten ( with stop at the end of the cycle.) Total time for fast feed, slow grinding feed, and stop at the feed carriage setting ( adjustable by timer) 1 to 100 sec.. DIAMOND CUTTING Maximum diameter difference in copy: 8 mm Total tMaximum copy taper : 30º COOLING EQUIPMENT Pump flow rate : 45 l /min Tank capacity: 100 l Decanting compartments : 4 EXTERNAL AND MAIN DIMENSIONS Total machine length: 2.350 mm Total machine width : 1.560 mm Total machine height: 1.450 mm Height of the grinding wheel axes 1.050 mm. Pedpszq Sfkofx Ad Sogr External dimensions of shipping packaging : 2.400x1.700x1.600 mm Shipping packaging volume: 6.53m3 WEIGHTS Net: 2.340 kg Gross with cage packaging : 2.445 kg Gross with shipping packaging: 2.485 kg

Condition: used, Year of construction: 2002, Technical details: grinding length: 1500 mm grinding width: 700 mm workpiece height: 580 mm table load capacity: 2380 kp Podeq Sbh Uopfx Ad Sjgr table speed -stepless-: 5 - 35 m/min grinding wheel dia. x width: 500 x 100 x 203 mm grinding wheel motor: 18 kW speeds:: stufenlos elektronisch total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, el.handwheel, full cabin *

Condition: good (used), Year of construction: 1986, grinding depth: 500 mm, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Pgsdpfxszwkwrs Ad Ser Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: used, Loeser S0 profile sander for sanding profiles using templates. The sanding belt is guided over the profile wheel/template, thereby transferring the shape onto the wood, which is fed manually through the machine. Technical data: Pgedpozryxbjfx Ad Sjr - Max. workpiece dimensions (L x W x H): approx. 500 x 300 x 100 mm - Motors: approx. 2 kW each

Condition: like new (used), Double-sided profiling milling and grinding machine, model Uinze 4T2500STD - Year of manufacture: 2023 - New price: €64,000 - Machine is equipped with 2 special carbide milling heads and 2 grinding units - Weight: 4300 kg Podpjzqgmcsfx Ad Ssgr - Safety fence: 800 kg, safety roller gate: 300 kg - Working length: 2500 mm, working width: 170 mm - Motor power: milling unit 4.5 kW, grinding unit 4.5 kW - Table return speed: 80-100 m/min - Milling speed: 4000 rpm

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Production from a straight blank or regrinding of used knives using a template. Podpfxozrx Hqj Ad Sjgr Technical data: - Maximum grinding wheel diameter: 225 mm - Maximum tool diameter: 300 mm - Minimum tool diameter: 80 mm - Maximum tool width: 230 mm

Condition: ready for operation (used), functionality: fully functional, HAAS UHS / Manual Hand Lever Surface Grinder - Grinding length approx. 350mm - Grinding width approx. 180mm - Grinding height approx. 250mm - Grinding movement controlled manually via lever - Swiveling range (horizontal) 360 degrees - Tilting range (vertical) +15 to -20 degrees Pedezu Nphopfx Ad Ssgr - General angular adjustment - Spindle speeds 2500 / 5600 RPM - Drive power 1.1 kW Dimensions: L x W x H 1.2 x 1 x 1.7 meters / Weight 750 kg Subject to errors and omissions.

Condition: used, Year of construction: 1989, band width 150 mm band length 3500 mm band speed 30 m/sec Scheiben-Ø 400 mm grinding feed 0 - 5 m/min work piece revolutions 0 - 140 U/min power capacity - workpiece power 2,2 kW grinding diameter 100 - 600 mm clamping length 6000 mm bed length ca. 8000 mm Pgodpsyw Tkkefx Ad Sor voltage 380 V / 50 Hz motor speeds: 1450 U/min power capacity 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 8,6 x 2,6 x 2,5 m

Condition: used, rand: DANOBAT Model: RT 1200 Useful support surface 1200 x 450 mm Useful grinding surface (100 mm wheel) 1200 x 600 Pjdpozqrmzjfx Ad Ssgr Useful grinding surface (50 mm wheel) 1200 x 550 Longitudinal travel X axis 1300 mm. Transverse travel Y axis 500 mm

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Pjdpfjyucd Hex Ad Segr Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Maximum gear diameter: 330 mm Maximum module: 6 Wheel width: 180 mm Pgjdpfxozh H R Ns Ad Ssr Minimum module: 0.5 Machine weight: 5500 kg Available accessories can be seen in the photo.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Used surface grinding machine Rheinberg 2012-2014 retrofit with €80,000: new Wagner magnetic table New Siemens PLC Psdpfoycgnrox Ad Sogr New filters

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Pgedpfxjyfnlko Ad Ser Max. usable width (shift distance): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Dressing device Grinding stones Turbo separator

Condition: ready for operation (used), functionality: fully functional, The Studer S30-12 CNC is a precision cylindrical external grinding machine from Fritz Studer AG. Brand: Studer Type: S30-12CNC Serial number: 1248.74 Dimensions: L3250mm Dimensions: W2000mm Dimensions: H1950mm Wheel speed: 30 m/s Pedpfezn Nqrsx Ad Sjgr

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 51BG93, grinding width: 50 mm, total height: 2,600 mm, total length: 4,600 mm, total width: 2,100 mm, feed length X-axis: 800 mm, feed length Y-axis: 500 mm, workpiece weight (max.): 500 kg, grinding wheel diameter: 400 mm, table load: 500 kg, type of input current: DC, overall weight: 4,000 kg, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, input voltage: 400 V, Equipment: documentation/manual, The machine is well-maintained and in good working order. It is currently still in full operation. It can be inspected in weeks 34 and 35. Pgedpfxeztzhmj Ad Ser Several flanges will be included. Paper band filters, etc., are also included. The machine is sold without warranty.

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 83670 € 1581.36 € 810 mm 610 mm 800 x 400 mm 800 x 400 mm 5 - 25 m/min 0 - 2.250 mm/min 450 mm 0 - 675 mm/min 480 mm 500 - 2200 1/min 3,75 (optional 5,5 / 7,5) kW 1.5 kW 3250 mm 3075 mm 2250 mm 2900 kg 175 kg 350 kg 355 x 50 x 127 mm 1,1 kW Fully enclosed splash guard 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list automatic vertical feed Pgedjzwqa Hepfx Ad Sjr servo drive for grinding wheel feed and table cross feed heavy duty spindle with 2 sets (4) of class P4 super precision angular contact ball bearings hardened and ground C2 grade ballscrew on crossfeed and elevation hardened slide ways electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation grinding wheel grinding wheel flange grinding wheel balancing stand LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH OPTIONS (PRICES ON REQUEST): autom. dressing attachment mounted over the wheel version without fully enclosed splash guard

Year of construction: 2003, condition: used, Max. grinding length: 2000mm, max. grinding width: 1000mm, max. working height with new grinding wheel: 600mm, max. workpiece weight: 3.2t, max. table load: 4.5t, clamping surface dimensions: 2860x1000mm, tool mounting: 4x grinding wheel mounts, spindle diameter at front bearing: 90mm, grinding wheel diameter: 500mm, max. grinding wheel width: 150mm, mounting diameter: 203.2mm, spindle speed: 1000-3000/min, cross travel: electromechanical, cross travel feed: 1-5000mm/min, max. cross travel: 1100mm, smallest programmable value cross axis: 0.001, vertical travel: electromechanical, vertical travel feed: 1-5000mm/min, max. vertical travel: 650mm, smallest programmable value vertical axis: 0.001, feed drive type: hydraulic, connected load: 125kVA, length: 10,284mm, width: 5137mm, height: 3925mm, weight: 22t, operating hours: 18,176h, with documentation. An on-site inspection is possible. Psdpfx Adjzuzyxe Sogr

Condition: used, Year of construction: 2001, Control Fanuc Top height above table 150 mm max. grinding diameter 300 mm centre distance 600 mm max. grinding length 600 mm max. workpiece weight 150 kg Grinding wheel angle 0 ° Overall size 3.100 x 2.520 x 2.100 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine was used for grinding eccentric shafts and is equipped with a Marposs gauging system. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Pjdpfx Aozp Rzbjd Segr

Condition: used, Year of construction: 2013, max. wheel diameter 260 mm gear width 320 mm max. module 4,5 min. module 0,5 Control SIN 840D max.helical angle +/- 45 ° total power requirement 68 kW weight of the machine ca. 15,50 t dimensions of the machine ca. 3,25 x 3,25 x 3,30 m Fire extinguishing system Siemens Sinorix TM Knoll Filtering system VL1500/8000 year 2017 Wekal loading cell Pjdpfx Adox R U Hge Segr