Used Biolux Ng Microscope for sale (131,640)

Condition: used, Documentation Multievacuator Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Bodpex Rihlsfx Aa Eoct Motor: 3 kW Plan to provide a rotary valve. Available at extra cost.

Condition: excellent (used), Year of construction: 2012, Reading Bakery Systems Low Pressure Extruder Bcedpfxox Edfxo Aa Eet 2012, Stainless, accurate production of a wide range of products including pretzels, shapes, sticks, braids, sushki, and other co extruded products, touch screen controls, twin hopper, efficient and precise dough forming, consistent and accurate piece weights, quick and easy product changeover, jacketed extrusion housing for temperature control, lightweight plastic hoppers for easy sanitisation, bandcutter operates 275 cuts per min or in a cycle mode up to 50 cpm, capable of 1500Kgs per hour, mobile, with pallet of spares, 3Ph

Condition: good (used), Year of construction: 1997, functionality: not functional, machine/vehicle number: TR206 10 1997, total width: 1,100 mm, total height: 150 mm, working width: 1,100 mm, workpiece weight (max.): 150 kg, power: 27.77 kW (37.76 HP), height adjustment type: electric, table width: 1,065 mm, operating pressure: 6 bar, Sandingmaster CSB2 1100m/m wide Roller & Pad Calibrating & Fine Sanding machine. Both 80* Shore hardness. Sandomatic Setting System. Bodpsx Hr Dhsfx Aa Eoct Ampmeters on both motors. Feed Motor 2 Speed 7 & 14m/min. Sanding belt dimensions: 1900 x 1130m/m. Operator manual available. Weight: Approx 3500kg. Complete with Sanding Belts: 80, 100 & 120 grit. Photos on WhatsApp.

Condition: ready for operation (used), functionality: fully functional, A good used automatic labelling system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required Single phase 240Volt AC supply Bjdpewufb Aefx Aa Esct Ready to ship worldwide

Condition: like new (used), Year of construction: 2009, operating hours: 100 h, functionality: unexamined, overall weight: 10,250 kg, total length: 5,000 mm, total width: 2,100 mm, total height: 2,400 mm, power: 530 kW (720.60 HP), fuel type: electric, operating pressure: 3 bar, Equipment: type plate available, Make Ingersoll Rand Model: CH6-C125MX1 Year of manufacturing: 2009 Serial no: V-7667 Working hours (on service meter): Low hours!! Capacity (Kw) 530 Voltage 400 Frequency (Hz) 50 Rpm 2980 Amps (A) 920 Dimensions LxWxH (mm) 5000 x 2100 x 2500 Bcedpfxjv A T Uhj Aa Eet Weight (kg) approx. 10250 Total quantity in stock 1 Capacity (m3) 7.66 Nm3/h Max. pressure (Bar) 2.8 Country of origin Italy Comments Almost Unused compressor

Condition: excellent (used), functionality: fully functional, Peddinghaus hydraulic profile steel shear type Peddimax 1002 Technical data: - Flat steel shear - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shear - Angle and T-iron at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - with square notcher for sheets up to approx. 13 mm - Notch depth approx. 70 mm - Notch width approx. 52 mm - Punching station Bcedex Rbihjpfx Aa Eet - Punching force approx. 100 t - Throat depth 510 mm - Stroke approx. 10 to 50 mm - Punches steel up to Ø 31 in 25 mm - Electrical contact length stop - Various: 10 punch dies + matrices - Drive 400 V / 5.5 kW - Space requirement W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: used, Year of construction: 2009, Case packer from 1993 refurbished by the manufacturer in 2009. Automatic packing of boxes with cardboard group by rows and by stacking in a cardboard box with closure. Max. production: 20 to 30 cycles / minute Nordson Problue4 glue generator Bcjdjx Rig Ispfx Aa Eet Label removal Delna DS 14 History, documentation and electrical diagrams available. Spare parts available. Product length 50 - 130 mm Product width 47 - 200 mm Product height 15 - 40 mm Carton length 70-250 mm Carton width 70-250 mm Carton height 40-120 mm

Condition: excellent (used), Year of construction: 2012, Reading Bakery Systems Kibbler 2012, Stainless kibbler, previously used for breaking up cereal bar mixtures after being mixed, 1000Kg stainless hopper mounted on conveyor, belt width 1150mm, overall length 2750mm, touch screen controls, 3Ph Bedpfxjx Edd Uj Aa Esct

Condition: good (used), Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller Bjdpfx Asizuf Uea Eoct -Manufacturer: Jungheinrich, swivel wheel from electric pallet truck EJE-KmS 16G-24-140-56 -Wheel size: Ø 96 mm / 100/40-75 -Dimensions: see photos -Number: 2x support rollers available - Price: per piece -Dimensions: 250/120/H135 mm -Weight: 5 kg/pc.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Bcsdpfsviwdmsx Aa Ejt Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: good (used), Year of construction: 1994, functionality: unexamined, travel distance X-axis: 900 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 1,415 rpm, spindle speed (min.): 35 rpm, table width: 300 mm, table length: 1,500 mm, type of input current: AC, overall weight: 2,700 kg, input voltage: 380 V, Brand: Chung Sing Model: H500 Year of manufacture: 1994 Serial number: 2H153 Bcjdpexzix Nofx Aa Eot Voltage: 380 V Frequency (Hz): 50 RPM: 12 speeds 35 - 1415 Dimensions LxWxH (mm): 2000 x 2100 x 2300 Weight (kg) approx.: 2700 Units in stock: 1 Manufactured in: Taiwan ROC Table dimensions (mm): 1500 x 300 Digital brand & model: Fagor XN300 Comments: Used but tidy machine incl. digital readout Longitudinal travel (mm): 900 Cross travel (mm): 350 Vertical travel (mm): 400

Condition: used, Technical details: turning speeds: 10000 U/min output: 22 kw weight approx.: 20 kg transmission ratio: 1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case. Bedpfsvb A Ubsx Aa Eoct *

Condition: used, Year of construction: 2004, Manufacturer: PRB Packaging Bjdpfx Aajx Righe Ejct Model: Destratus Year: 2004   Automated system for removing packs of bottles or cartons from a pallet. The equipment continuously feeds empty bottles to the rest of the line. Light curtain. UniOP control panel. History, documentation, and electrical diagrams available.

Condition: excellent (used), Year of construction: 2020, Total Bakery Three roll sheeter 2020, stainless, three roll sheeter, mounted on stainless conveyor, roller width 230mm, variable speed rollers and variable speed conveyor, on mobile frame, 3Ph Bcedjx Akcxspfx Aa Eot

Condition: good (used), machine vice, stable vice, drill press vice, drilling vice Bcodpeu Npfmefx Aa Eot -Manufacturer: Fortis, machine vice type Q94160 -Clamping jaws: 160 x 40 mm -Clamping depth: 205 mm -Dimensions: 405/160/H115 mm -Weight: 28.5 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 18,300 mm, feed length Y-axis: 1,000 mm, total length: 20,500 mm, drilling capacity: 50 mm, total height: 2,560 mm, total width: 3,500 mm, quill stroke: 330 mm, workpiece weight (max.): 1,088 kg, table width: 1,000 mm, table length: 18,300 mm, 2005 Peddinghaus Avenger MDL1000/B CNC Beam Drilling Line Machine Type: Single Spindle CNC Beam Drilling Line Control: Siemens Sinumerik Bcedpeu Nyg Uefx Aa Eet Year: 2005 Condition: Good. Can be viewed running Includes 60ft Table Technical Specification Max Beam Size: 60ft x 40" (18.3m x 1000mm) Max Beam Weight: 730lbs/ft (1088kg/m) Min Drill Diameter: 1/4" (6.5mm) Max Drill Diameter: 2" (50mm) Max Thickness: Up to 10" (250mm) Max Speed X-axis: 120 ft/min (37m/min.) Max Speed Y-axis: 120 ft/min (37m/min.) Spindle Power: 13 3/4hp (10KW) Drilling Feed Rate: 2" – 10" per min (50-254mm/min) infinitely variable Spindle Stroke: 13" (330mm) max Total power: 20 HP (14.9 KW) Power Supply: 400V, 3-ph, 50 Hz Average Output: 200 to 400 holes per hour depending on the profile drilled Approx Floor Space Required: 20.5 x 3.5m Machine Height: 2.56m

Condition: good (used), Year of construction: 1996, operating hours: 11,890 h, load capacity: 1,400 kg, lifting height: 7,100 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, empty load weight: 3,800 kg, mileage: 11,890 km, Taken in trade-in. Reach truck from the German brand Jungheinrich, year 1996, in good condition; capacity 1,400 kg; lifts up to a height of 7,100 mm; clearance height 2,900 mm; equipped with FREELIFT and SIDESHIFT; battery with automatic filling system and external charger. Watch the video on YouTube. Bedpfx Ajxfbn Rsa Eect

Condition: ready for operation (used), load capacity: 550 kg, nominal power: 69 kW (93.81 HP), Hindenlang TPEVA - 550 - Induction oven Kind of: Induction furnace Max temperature: 850° Capacity: 900 x 750 mm x 550 kg Voltage: 400 V / 100 A Bcedpexpkhnofx Aa Ejt

Condition: used, Automatic sugar coating machine Brand: Narong Industries Model: Rama NR Cota 19 series 5 Bsdpfx Aaex Rif Do Ejct DRUM DIAMETER: 19″ / 48 cm CAPACITY: 3 to 7 kg Blowing / Extraction / Rotation Option – Heating – Speed variation – Extraction temperature measurement – Supply air temperature measurement – Spray pressure measurement – Light: interior lighting Research and development / Pilot unit

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 3,100 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,600 mm, spindle speed (min.): 3,000 rpm, overall weight: 24,000 kg, heidenhain tnc 426 30 station tool changer Bedpfjrckbasx Aa Ejct bt spindle 50 speeds max. spindle speed 3000 rpm table 3100X1050MM max admitted weight 8000KGS strokes 3100X1000X1600MM chip evacuator high-pressure watering

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic unit from Jungheinrich order picking forklift type EJE-KmS 16G-24-140-56 -Hydraulic pump: Type Motor: Type 1 547 220 506 24 V 2 kW -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 210/180/H370 mm -Weight: 11 kg/pc. Bjdpfxeiz Dr Hj Aa Eect

Condition: good (used), Year of construction: 2007, operating hours: 10,031 h, load capacity: 3,500 kg, lifting height: 7,600 mm, fuel type: diesel, mast type: triplex, construction height: 3,380 mm, mileage: 10,031 km, Taken in part exchange Diesel triplex forklift Brand: Jungheinrich (Germany) Year of manufacture: 2007 Capacity: 3,500 kg Lifting height: 7,600 mm Overall height: 3,380 mm Option: FREELIFT Option: SIDESHIFT Option: FORK POSITIONER Bodpfex Nnf Hox Aa Eect

Condition: ready for operation (used), nominal power: 69 kW (93.81 HP), Hindenlang TPEVA 550 - Induction oven Kind of: Induction furnace Bcsdex Imk Ejpfx Aa Eet Max temperature: 850° Capacity: 750 x 900 mm x 550 kg Voltage: 400 V / 100 A

Condition: ready for operation (used), controller manufacturer: Heidenhain tnc 124, empty load weight: 6,000 kg, total length: 3,960 mm, total width: 2,450 mm, total height: 2,600 mm, Kiheung Point U3 X: 1200 - Y: 600 - Z: 550 mm CNC Longitudinal travel X-axe: 1200 mm Cross travel Y-axe: 600 mm Travel Z-axe: 550 mm Dimensions clamping space- table: 1700 x 470 mm Power on spindle: 7,5 kW Admission in millinghead (ISO): ISO 50 Bcedpfx Aasx Impbs Eot Max speedrange: 40 > 1620 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 426, empty load weight: 19,000 kg, total length: 6,120 mm, total width: 5,050 mm, total height: 3,700 mm, volledige CNC indexeerfreeskop (2x 2,5°) gereedschapswisselaar met 30 posities gekoelde deurspindel en 2 magneettafels : 1000 x 300 mm Longitudinal travel X-axe: 3600 mm Cross travel Y-axe: 1000 mm Bodpjxpkifefx Aa Eect Travel Z-axe: 1600 mm Dimensions clamping space- table: 4100 x 900 mm Power on spindle: 22/29 kW Admission in millinghead (ISO): BT 50 Max speedrange: 1 > 2250 rpm