Used Bimak Drill for sale (4,885)

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Nwodpfxswkir De Acvod Storage location: Nattheim

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Storage location: Nattheim Nodpfevvi Ausx Acvswd

Condition: used, functionality: fully functional, power: 1.5 kW (2.04 HP), spindle mount: MK 4, drilling depth: 190 mm, rotational speed (max.): 2,020 rpm, rotational speed (min.): 75 rpm, throat depth: 340 mm, Equipment: CE marking, Max. drilling capacity (steel): Ø 35 mm Max. drilling capacity (cast iron): Ø 40 mm Max. tapping capacity: M24 Spindle taper: MT4 Spindle speed range: 75 – 2020 rpm (12 steps) Spindle auto feed: 0.12 / 0.24 / 0.40 mm/rev. Spindle stroke: 190 mm Throat depth: 340 mm Crosstable X/Y: 630 x 250 mm Worktable size: 540 × 440 mm (14 mm T-slots) Max. spindle-to-table: 605 mm Max. spindle-to-base: 1195 mm Nwedpfx Acsyplukovsd Column diameter: 140 mm Complete with: - Powered lifting worktable - Cooling pump - Worklight - Drill protection - Digital speed display Motor power: 1.5 kW Machine (L×W×H): 90 × 66 × 230 cm Machine weight: 500 kg

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Nodpfx Acjqa Txqevewd Weight 1600 kg good condition

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm Nwjdpfx Aceihmwtevjd - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: used, Column Drill Gillardon Type GSB 32 V Machine No.: Year of manufacture approx. 1975 Drilling capacity: 32 mm Taper: MK 4 – long quill Throat: 350 mm Quill travel: 170 mm Table size: 570 x 470 mm Column diameter: 140 mm Spindle speed Motor speed step 1, Belt step 1: 50 – 300 rpm, stepless Spindle speed Motor speed step 2, Belt step 1: 100 – 600 rpm, stepless Spindle speed Motor speed step 1, Belt step 2: 100 – 500 rpm, stepless Spindle speed Motor speed step 2, Belt step 2: 150 – 1000 rpm, stepless Motor power: 1 / 1.5 kW Power supply: 380 Volt, 50 Hz Nwodpeyhf Izsfx Acvod - automatic feed approx. 0.1 / 0.16 / 0.25 mm/rev, 3 steps - spindle speed via 2 motor speeds, 2 V-belt stages and variator gearbox - adjustable drilling depth stop - table height adjustment via rack and hand crank - tiltable drilling table with angle scale - drill chuck RÖHM Ø 1 to 13 mm - machine lamp Required space (L x W x H): 1000 x 750 x 2000 mm Weight: 470 kg Good condition

Condition: new, Year of construction: 2026, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 Nwedpfx Asfx U D Aocvjd - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet 1 coolant tank Nodpfx Acsnvdmwsvswd

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Can be moved in 7 axes Nwodoyrdplspfx Acved Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with angle adjustment Nwedpfsyfta Tsx Acvjd Specialized drilling machine for staircase construction, window manufacturing, and universal applications, featuring pneumatic height adjustment. Angled doweling and spindle boring for balusters can be easily performed thanks to the rotatable drilling unit. Motor with pole-changing capability, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start via convenient handle switch Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can swivel 65° to the left and right Pneumatic adjustment of the working height, doweling on two levels without repositioning Desired drilling heights can be set for each level using a handwheel and digital counter; switchover is then performed pneumatically from the front Cross adjustment approx. 320mm, stepless or in 12mm increments Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, positionable at the front and rear of the table 2 swivel workpiece supports 2 side stops, also usable as front supports Mobile base Extraction port 80mm 4 used but good drill bits: 9, 12, 16, 19mm Minor paint touch-ups; excellent condition—see original photos A used swivel slot mortising machine in this condition is very rarely available. CE mark User manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this seller."

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR Njdpfeywtxbex Acvowd For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, Z. Bavelloni VT1250SA + L automatic horizontal drilling machine with 2 drilling heads (upper and lower). The machine is in very good working condition, equipped with a laser for precise hole positioning and a switch for spindle speed adjustment. It will be delivered with a set of diamond drilling tools. The machine features a water tank and water pump. Nwodpfoyghh Uox Acvod

Condition: new, Year of construction: 2026, functionality: fully functional, Alignment press system Push and pull force 24/30 t Nodpfeuy N H Eex Acvjwd Hydraulic station 50 m rod Expander 80/132/160/200 mm Without locator device Price: €27,000.00 net Dry drilling: no bentonite use, no bentonite disposal

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Nwjdpfev Aalyox Acvsd Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: not inspected (used), machine/vehicle number: 42 255 016, functionality: unexamined, table width: 260 mm, table length: 340 mm, overall weight: 400 kg, spindle speed (max.): 4,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Table dimensions: 340 x 260 mm (with two T-slots) Nwsdpoyr Iwaefx Acvsd Spindle speed: 80 to 4,000 rpm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 2,100 mm Weight: 400 kg External reference: 52

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 8906, table width: 520 mm, table length: 770 mm, drilling depth: 160 mm, rotational speed (max.): 2,800 rpm, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid requires collection within the period from 04.05.26 to 07.05.26. Nedpfeyr Iqyex Acvewd TECHNICAL DETAILS Spindle speed: 80-2,800 rpm Drilling depth: 160 mm Table dimensions: 770 x 520 mm Number of T-slots: 4 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 900 x 2,100 mm Weight: 1,500 kg External reference: 50

Condition: not inspected (used), Year of construction: 1989, machine/vehicle number: 35232052, functionality: unexamined, rotational speed (max.): 2,500 rpm, rotational speed (min.): 160 rpm, table width: 320 mm, table length: 400 mm, overall weight: 400 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Spindle speed: 160 - 2,500 rpm Table dimensions: 400 x 320 mm MACHINE DETAILS Nwodpfx Acoyr Inrsvod Operating voltage: 380 V Frequency: 50 Hz Rated current: 3.1 A Power connection: 1.1 kW Dimensions & weight Dimensions (L x W x H): 600 x 500 x 1,800 mm Machine weight: 400 kg EQUIPMENT Thread cutting head by manufacturer EDALCO External reference: Lot 14

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, travel distance W-axis: 350 mm, rotational speed (max.): 300 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding is binding and requires collection within the specified period: 04.05.26 to 07.05.26. TECHNICAL DETAILS Maximum workpiece dimensions (L x W x H): 840 x 460 x 350 mm Maximum workpiece weight: 150 kg Worktable dimensions: 600 x 300 mm Travel range X-axis: 350 mm Travel range Y-axis: 250 mm Travel range Z-axis: 350 mm Travel range W-axis: 350 mm Rotational speed C-axis: 300 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,200 x 2,200 mm Machine weight: 2,000 kg External reference: Lot 12 Njdpeyr H Ttsfx Acvswd

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 264237J, total width: 350 mm, total length: 450 mm, total height: 350 mm, overall weight: 70 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect on time between 04/05/26 and 07/05/26. MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 450 x 350 x 350 mm Weight: 70 kg External reference: 31 Nwjdpfjyr Huksx Acvod

Condition: not inspected (used), Year of construction: 1999, machine/vehicle number: 55194, functionality: unexamined, drilling depth: 16 mm, rotational speed (max.): 2,580 rpm, table width: 230 mm, table length: 230 mm, spindle stroke: 80 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection between 04.05.26 and 07.05.26. Nsdpfxoyr Hr Ns Acvjwd TECHNICAL DETAILS Drilling capacity: 16 mm Spindle travel: 80 mm Speed: 120 – 2,580 rpm Table dimensions: 230 x 230 mm MACHINE DETAILS Connected load: 650 W Operating voltage: 400 V Dimensions & weight Dimensions (L x W x H): 650 x 350 x 960 mm Weight: 70 kg External reference: 29

Condition: used, machine/vehicle number: 8580, 3 automatic feeds 01, 02 -0.3mm/rev Table clamping surface: approx. 500 x 370 mm Table height adjustable via rack and pinion Machining base plate approx. 350 x 320 mm With motor: 1.5 kW, 1415 rpm, 380/220V Njdjwtdmujpfx Acvowd

Year of construction: 1983, condition: good (used), KOLB Radial drilling machine NKR 42 machine no.: 10073 spindle diameter 70 mm spindle stroke 325 mm throat 1250 mm rpm max 1700 clamping table 2500x4500 mm,10 T-slots Dimensions LxWxH Nsdpfx Acelvtg Njvewd 25000x4500x29000 mm weight approx. 10 to accessories: Steel cabinet with clamping tools Machine vice

Condition: good (used), KOLB radial drilling machine NKR 43 spindle diameter 80 mm spindle stroke 325 mm Projection 1250 mm 5.5 KW rpm 50 - 2100 Angle bracket LxWxH 610x500x530 mm Dimensions Nwodpjf Ddqgefx Acvjd LxWxH 2420x920x2850 mm Weight approx. 3,5 to

Condition: ready for operation (used), machine/vehicle number: 2522, See pictures for condition and details Nodpfx Ajtxtfvscvswd

Condition: used, Universal Tool Milling Machine with Digital Readout DECKEL Type FP 1 Universal Milling Machine Machine No.: 2102 - 3322 Year of manufacture: 1986 Travel range X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis active digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed selectable via 2 motor speeds and 8 gearbox steps - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and is extendable by 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on the machine base Nwodpfjr D T Uysx Acvsd - Operating manual, electrical diagram, spare parts list included Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition