Used Biesse Rover 30 for sale (340)

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Bjdjyq Avhopfx Afmelp Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: used, functionality: unexamined, Ferwood Code: AGG0207 - Manufacturer Code: 6314H0080 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service. Please contact us. 4.5KG 20X20X20 Bsdpfxeylal No Afmjlp

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 40 kW (54.38 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 30 m/min, Equipment: CE marking, documentation/manual, Biesse STREAM B MDS 2.0/15.0 Bedpfx Asyu S Iusfmelp

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Bjdeyvrrqjpfx Afmelp Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum roller material thickness: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Feed rate: 12 - 18 m/min Feed rate: Infinitely adjustable Height adjustment: motorized Gluing system: Granulate Glue reservoir: Top Cross-cutting unit: 2 motors Edge copying unit: 2 motors Flush/radius/chamfer stations: 1 Design: Left-hand machine MACHINE DETAILS Control system: BIESSE SMART TOUCH 23" Total power consumption: 13 kW Dimensions & Weight Machine length: 5,610 mm Weight: approx. 2,250 kg EQUIPMENT Belt overpressure Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying system Joint milling unit Preheating zone Pressure zone: NC-controlled Profile drawing blade, flat drawing blade Swivel unit Nesting equipment Bjdszktquopfx Afmjlp NC axis(es) Profile change: automatic Conformity marking: CE mark, EAC mark

Condition: used, Year of construction: 2006, functionality: fully functional, TECHNICAL DETAILS Components ADVANTAGE C transverse loader: automatic ROTATING DEVICE (flipper): available BIESSE FTT: with 4 heads, drilling and milling, automatic tool change BIESSE FHT: 2 WORKING UNITS horizontal drilling and dowel insertion WANDRES: brush cleaning from top ADVANTAGE SC transverse unloader: automatic Plate dimensions Plate length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Plate width: 140 - 800 mm Plate thickness: 12 - 60 mm Drilling units Drill heads FTT 800: 2 machining centres with 4 boring units - 5 working tables Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Revolver cartridges: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B. Milling spindles Electro spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Electro spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirror-inverted panels left positioning element: fixed for lateral reference Right positioning element: movable in X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X Length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross feed, single drive Unloading system: 1 belt conveyor with cross feed, single drive Additional: Cleaning fan in the unloading area Drill heads FHT (horizontal): Bodpfxey Ui Rne Afmelp machining centres with 2 working units (1 LH unit / 1 RH unit) - 3 working tables. HORIZONTAL BORING UNITS with 24 independent spindles to be installed onto 2 operating units HORIZONTAL INSERTING UNITS WITH 5+5 GLUE INJECTORS AND 8 mm. DIAMETER DOWEL INSERTERS TOOL-HOLDER ADAPTOR for the quick change spindles of the boring units. GLUE INJECTION AND DOWEL INSERTING UNIT for 8 mm. dia. dowels to be added to the standard ones. The unit is prearranged for the insertion of 8 mm. diameter and 25-35 mm. long dowels.* The 8 mm. diam. dowel inserting units are required. NOTE: Dowel inserting unit was never used and not tested. Not possible to be tested ADVANTAGE C 3200 TRASV. 1 POS - loading ADVANTAGE SC 3200 TRASV. 1 POS - unloading Security features Standards: CE compliant Safety equipment: Extensive protective enclosures

Condition: used, machine/vehicle number: 008249, Type of edging: Thin edge, Thick edge Bledozbrl Tspfx Afmsp Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008599, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 5 Bledez Eyw Ujpfx Afmsp No of Top Units: 2 Lateral horizontal groups: yes

Condition: used, Year of construction: 2002, BIESSE Stream SB2 10.5 Double-Head Edge Bander. Bsdpjz Dp Rujfx Afmolp

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, feed rate X-axis: 18 m/min, overall weight: 1,900 kg, Equipment: CE marking, The machine can be tested. Automatic engine start-up according to the loaded work schedule. Management of automatic adjustments for groups equipped with numerically controlled axes. List of programs with manual and/or automatic start-up. Error diagnostics with codes and explanatory comments. Statistical data related to production. Periodic maintenance operations assisted by software. GEAR MOTOR for track movement with a working speed of 12-15-18 m/min, 1.5 kW motor. Vertical pressing unit with high rigidity, allowing for panel size changes without adjusting the operating units. Panel thickness: 10-60 mm Film height: 14-64 mm Edge thickness (roll form): 0.4-3 mm Edge thickness (strip form): 0.4-12 mm Panel/track contact surface: 25 mm Minimum panel length: 140 mm Minimum panel width (with length 140mm): 85 mm Minimum panel width (with length 250mm): 50 mm Feed speed: 12-18 m/min Distance between 2 consecutive panels: 650 mm Pneumatic connection: 7 bar Bljdps Aht Rfjfx Afmop Operating voltage: 400 V / 50 Hz three-phase + neutral Control voltage: 24 V - DC Inverter: 200 Hz EVA adhesive tank capacity: 2 kg (approx.) Adhesive tank heating time to 1/2 capacity: -10 minutes (approx.) Liquid antistatic spray unit: ADZ02 PRE-MILLING UNIT RT02 Polishes the surface to be edged before applying the adhesive. Equipped with 2 high-frequency motors of 1.8 kW each / 12000 rpm. Diamond tools: H=65 mm Z=3+3 45° for pre-milling. ADHESIVE APPLICATION, EDGE FEED AND PRESSING SYSTEM VC-511 End trimming unit: IN-801 Top/bottom milling unit: RF02 Multi-profile tool set for the top/bottom milling unit: R=2 mm + R=1 mm. End rounding unit with 2 motors: AR02 E Radius edge trimming unit: RB02 Surface edge trimming unit: RC02 Polishing unit with textile brushes: SZ02 CLEANING LIQUID SPRAY UNIT LPT02 Hot air blower.

Condition: excellent (used), Year of construction: 2001, I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001. 2 Stk. CNC drawers slidings inserting from top. 6 Stk. Glue spraying heads 1 Stk. Vibration accessories input device. Bedpst N N Aqefx Afmelp Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, BIESSE Jade 340 Edgebanding Machine Pre-milling unit Glue application unit Trimming and corner rounding unit Profile sanding unit Edge sanding unit Polishing units Bodpfozcxyyjx Afmjlp Spray valves, front and rear Additional replaceable glue pot Machine in continuous use. Year of manufacture: 10/2018.

Condition: good (used), Year of construction: 2006, I sell the widebelt sanding machine Biesse Regal 520 - 1350, year 2006. Configuration: 1pc. electronic segmented pad 1pc. electronic segmented pad Working width 1350mm Bljdezkmdhjpfx Afmep Pressure rollers for short elements. Air-blow on both units. Total weight 3050kg Condition very good. Available immediately.

Condition: excellent (used), Year of construction: 2001, I sell the Stacking device BIESSE RBO MAGNUM, year 2001. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Automatic loading. Bljdpfx Asxyag Uefmop Infeed table motorised band-system Infeed tables motorised roller-system on the floor (2 channels) Outfeed table front Band-system Security fence system fully complete ! Total power 25kW Year 2001. Available immediately. Ready for work.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Edgebander BIESSE Akron 1440A Blodpfx Aoyh A I Ajfmop Availability: April/May 2026 CE certificate Year of manufacture: 2017 Possibility to inspect the machine before purchase

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 55595, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 60 mm, overall weight: 3,000 kg, controller model: Xp 600, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Working Area Y-axis: 1,000 mm Working Area Z-axis: 60 mm Bsdpfxsydk Rme Afmslp MACHINE DETAILS Control: Xp 600 with Biesse Works Software Weight: 3,000 kg EQUIPMENT Automatic loading system with motorized belt conveyor 2 clamps for securing and transporting the panel 1+1 vertical electrospindle (lower + upper) with 3 axes 1+1 independent saw (lower + upper) 29 + 29 independent spindles for vertical drilling in X and Y direction (upper + lower) 10 + 10 independent spindles for horizontal drilling in X and Y direction (upper + lower) Automatic unloading system with motorized belt conveyor

Condition: used, functionality: unexamined, Ferwood Code: AGG0062 – Manufacturer Code: 6314A0111 – Condition: Used – Functionality: Not tested – Compatible Machine: CNC BIESSE ROVER 23/24/27/30/346 – If interested, we offer an overhaul service, please contact us. Weight and dimensions for transport: 2.5 kg, 20x20x20 cm Bljdpfx Afjvu Auuomep

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Bsdpouqw E Nsfx Afmslp Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Condition: used, Year of construction: 2018, machine/vehicle number: 1000023651T, functionality: fully functional, power: 50 kW (67.98 HP), input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 3,200 mm, Equipment: documentation/manual, Selco WNAR 6 miter saw center. Bodpfx Afszl T Hlomolp

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 1000056636, functionality: fully functional, cutting width (max.): 3,500 mm, overall weight: 3,969 kg, cutting length (max.): 3,200 mm, No minimum price – guaranteed sale to the highest bidder! Bljdpfxsz Ni Eqj Afmep TECHNICAL DETAILS Max. cutting length: 3,200 mm Max. cutting width: 3,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,400 x 2,400 mm Weight: 3,969 kg Shipping packages: 4 units EQUIPMENT CE marking Documentation

Condition: excellent (used), Year of construction: 2011, Edge banding machine Manufacturer: Biesse Type: Akkron 440 Year of manufacture: 2011 Edge band thickness: 0.4 - 3 /10 mm Workpiece thickness: 10-60 mm Feed rate: 18 m/min Workpiece thickness adjustment: Electric Overall length: approx. 5,100 mm Gluing unit: Yes Trimming saw unit: Yes Bledpfx Afszltbijmsp Flush trimming unit: Yes Corner copying unit: Yes Radius trimming blade: Yes Straight trimming blade: Yes Scraping unit: Yes Spray device: Yes

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Automatic edge banding machine Bljdpfx Ajz Evg Eofmsp Information available upon request.

Condition: used, functionality: fully functional, Ferwood Code: RU0009619 - Manufacturer Code: - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC BIESSE ROVER A/B/C - If interested we offer an overhaul service, contact us. Bjdpfsv In E Sex Afmjlp

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Bjdpfjzp Hbqex Afmjlp Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete Extra The machine has a MULTIFUNCTION UNIT EQUIPPED with a drilling unit with four tool outputs. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER25 recordings, speed 5,000 rpm. (If this drilling unit is also to be used for sloping frames, only two exits (opposite each other) are used). The machine also has a MULTIFUNCTION UNIT EQUIPPED with a mortising unit with two tool outlets. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER32 recordings, speed 16,000 rpm. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Bjdpfx Afewlbxljmjlp Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading