Used Biesse Rover 24 L for sale (338)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working area X: 3200 mm Working area Y: 1450 mm 4-axis electrospindle Drilling units for vertical drilling: 10 Drilling units for horizontal drilling X: 4 Drilling units for horizontal drilling Y: 2 Blade for grooving in the X direction Fixedly installed horizontal lock case boring unit with two outlets Circular tool changer with approx. 16 positions Work table with 6 stops Software: Biesse bSolid Becker Picchio 2200 vacuum pump, 90 m3/h Safety mats Lateral safety guards Bwedpfx Aozm Nbhsp Ijw Weight approx. 3420 kg. Only 3763 electrospindle operating hours 38 drilling hours and 1100 horizontal motor hours for door mortising Available at the end of 2026.

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Bwsdpjvwgizefx Ap Iow Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: used, machine/vehicle number: 008560, X axis working area: 3140 mm Y axis working area: 1260 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 13 Bedpfx Apozvwtqe Isww

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 89867, functionality: fully functional, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,875 mm, travel distance Z-axis: 324 mm, number of slots in tool magazine: 12, overall weight: 4,000 kg, TECHNICAL DETAILS Working area X-axis: 3,765 mm Working area Y-axis: 1,875 mm Working area Z-axis: 324 mm Table length: 3,600 mm Table width: 1,800 mm Tool holding system: HSK-F63 Tool changer positions: 12 positions MACHINE DETAILS Number of milling spindles: 1 piece Weight: 4,000 kg Transport packages: 1 piece EQUIPMENT Flat table BiesseWorks system/software Safety mat Drilling tool included Saw unit included Labelling machine Loading system Bwsdpfxsy Nxybj Ap Iow Unloading system

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Bjdpfx Apeyqxxro Ieww Total number of drilling spindles: 39 Total number of tool changer positions: 22

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Bjdpfx Aougpwnsp Ioww Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 1000056636, functionality: fully functional, cutting width (max.): 3,200 mm, total length: 8,000 mm, overall weight: 3,969 kg, cutting length (max.): 3,200 mm, TECHNICAL DETAILS Max. cutting length: 3,200 mm Max. cutting width: 3,200 mm MACHINE DETAILS Dimensions & Weight Bjdpfx Apjy Nxvco Isww Dimensions (L x W x H): 8,000 x 2,400 x 2,400 mm Weight: 3,969 kg Supply voltage: 400 VAC Number of supply phases: 3 Power: 4 kW Frequency: 50 Hz EQUIPMENT Documentation CE marking

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) Bodpfjyx S N Uox Ap Isww POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)

Condition: used, machine/vehicle number: 008338, X axis working area: 4500 mm Y axis working area: 1935 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Bwodpfox A Tkxjx Ap Ijw Number of controlled axes: 5 axes Total number of drilling spindles: 41 Total number of tool changer positions: 37

Condition: used, Year of construction: 2006, machine/vehicle number: BM0000029, controller model: WINDOWS XP, number of spindles: 42, plate height: 60 mm, plate length: 2,800 mm, plate width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowel insertion with an additional robotic arm for loading! The machine must be picked up between June 10, 2026, and June 30, 2026! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel thickness: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Bwsdpey Uvnajfx Ap Iew Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool changer: Yes Number of tool magazine slots: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light curtains 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Barcode scanner HONEYWELL Protective netting on the machine The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8530

Condition: excellent (used), workpiece length (max.): 6,700 mm, workpiece width (max.): 1,900 mm, workpiece height (max.): 290 mm, number of axes: 5, Rover B edge 1967 5 axis 13,2KW liquid cooled drilling head BH40L 29vertical +10horizontal + saw Automatic pod and rails position Edge banding Aggregates for edge banding uniclamp vertical + horizontal Very good condition Bsdpfx Asylcgpjp Isww

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. It comes with the complete panel return system. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Bwsdpfjzug Smsx Ap Iew Technical Data: • Model: BIESSE Akron 1440 A • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is included with the machine.Availability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior appointment.Available for collection from the beginning of September 2026.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Working area X: 3640 mm Working area Y: 1342 mm Part clearance: 180 mm 12 kW C-axis electrospindle, ISO30 mounting Drill bits for vertical drilling: 24 Drill bits for horizontal drilling X: 6 Drill bits for horizontal drilling Y: 4 Saw blade for grooving in the X direction 12-position revolver tool changer Work table with 6 rails with EPS automatic positioning of the rails, vacuum cups Bwjdozmff Nspfx Ap Ijw Chip conveyor belt 1 vacuum pump with a capacity of 90 m3/h Safety mats Approximate weight: 4000 kg. Includes 3 aggregates (for door milling, mortising, etc.), vacuum cups, and some Uniclamps. Only 1406 operating hours on the 4-axis electrospindle, and 831 hours on the drilling unit. Available from January 2027.

Condition: excellent (used), Year of construction: 2004, I sell the throughfeed drilling machine with BIESSE TECHNO FDT. Year 2004 Working area: X: 215 - 32.000 mm Y: max. 672 mm (horizontal spindles 24 pcs. per 32mm offset) Z: Workpiece thickness: 9 - 65 mm min. X middle distance between vertical units: 96 mm Configuration: 4+4 motors from under 1 bottom jumping milling unit Bjdpfx Apsi U Apmo Isww 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 4+4 motors from top 4 pcs. material pressure from top Very good condition. Available immediately. One more BIESSE TECHNO FDT in different configuration available from line. Price on agreement.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1000042371, functionality: fully functional, Biesse Akron 1130 J Machine Number 1000042371 Year of Construction 2020 Panel height mm 8 - 50 PVC/ABS mm 0.4 - 3 Multi-Velocity Kit 9 m/min Adjustable working height Variable inlet guide Side roller with idle wheels for panel support RT01 grinding group Coiling plate Bsdpfx Aps Ahuqpo Ioww Infrared lamp to heat the edge SP01 hot-melt adhesive bonding group Edge pressure group on straight profiles with pressure rollers IT01 tilting adjustment unit RF01 2-axis tilting motor group AR01 multifunction rounded-edge group (edge trimmer + deburrer) RB01 edge scraper group RC01 glue scraper group SZ01 brush group ADZ01 anti-adhesive spray group Electrical and mechanical predisposition for PUR adhesive system Pro-Nesting Kit LPT01 cleaner liquid nozzle spray group

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 50 mm Bsdpfxeyngy Ss Ap Ieww No of Grippers: 8

Condition: used, machine/vehicle number: 008184, X axis working area: 8200 mm Bwsdpjyxmv Nsfx Ap Ijw Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, empty load weight: 7,200 kg, working width: 1,535 mm, spindle speed (max.): 20,000 rpm, working height: 275 mm, working length: 6,200 mm, Submitting a bid obliges you to collect the machine by June 22, 2026! TECHNICAL DETAILS Number of milling spindles: 2 Milling spindle 1 Number of controlled axes: 5 Spindle speed: 1,000 - 20,000 rpm Main motor power: 9 kW Bjdpfx Apey Tu Upe Ioww Milling spindle 2 Number of controlled axes: 3 Main motor power: 18.5 kW Tool changer positions: 22 Tool clamping system: HSK-F63 Working area X-axis: 6,200 mm Working area Y-axis: 1,535 mm Working area Z-axis: 275 mm X-axis maximum travel: 6,820 mm Y-axis maximum travel: 1,963 mm Table length: 6,200 mm Table width: 1,320 mm MACHINE DETAILS Software: BiesseWorks Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,400 x 2,500 mm Unladen weight: 7,200 kg Transport packages: 1 piece EQUIPMENT Vacuum pump Becker VTLF 250 (main motor power 5.5 kW; capacity 250 m³/h) Safety mat Pneumatic material clamping system Beam table CNC documentation: USB stick, user key/licenses

Condition: used, machine/vehicle number: 008595, X axis working area: 4687 mm Y axis working area: 260 mm Working Table: Pod and Rail Bodpfxjy Stvve Ap Ieww Main Electrospindle power: 19 KW Number of controlled axes: 4 axes Total number of tool changer positions: 44

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Bsdpfx Apswuz Eke Isww Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: excellent (used), Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C, A axes: available Swivel machining: 2 working areas for swivel machining Work table: ATS-HTS-EPS Automatic console positioning system EPS 10 automatically positionable consoles 2 locating pins per console 5-axis milling spindle: Power: 9 kW / 11 kW at 60 Hz Speed: up to 24,000 rpm Tool holder: HSK-F63 Liquid-cooled Drilling head BH 26 16 vertical drilling spindles 4 horizontal drilling spindles in the X direction 2 grooving units for grooves in the X and Y directions Vertical drilling spindles 16, Horizontal drilling spindle X = Tool changer: Chain tool changer with 21 tool positions Clamping systems: Uniclamp clamping system - 6 pieces Control system: BIESSE XP 600 Chip removal: Motorized conveyor belts for the removal of chips and machining waste Vacuum pump BECKER: Motor power 5.5 kW Conveying capacity: 244/286 m³/h Additional equipment: Numerous vacuum suction cups; 6 UNICLAMP clamping systems; Numerous HSK 63 tool holders; 2 large saw blades in the tool magazine Compressed air: 7-7.5 bar Total power: 25.3 kW Weight: 4200 kg Bwjdpfszxbhwsx Ap Isw

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 94464, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, controller model: XNC Numerical Control, TECHNICAL DETAILS Working Area X-Axis: 3,400 mm Working Area Y-Axis: 1,300 mm Bwodpfx Asydkkgsp Iew Working Area Z-Axis: 155 mm Number of Work Fields: 2 Tool Changer Positions (lateral): 3 Tool Changer Positions (chain): 20 Drilling Head Configuration: 10 vertical drills X-axis 12 vertical drills Y-axis 6 horizontal drills X-axis 2 horizontal drills Y-axis MACHINE DETAILS Control System: XNC Numerical Control Vertical Spindle Type: C-axis Vector, ISO 30 cone type EQUIPMENT Extraction pump 8 manually adjustable beams for suction cup support with display 8 pneumatic bakelite rails for panel lifting 3 manually adjustable suction cups per beam Front safety and protection system with mats Comprehensive safety fencing Motorized mat for chip removal

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, 24 vertical spindles, 10 horizontal spindles, 7-position tool changer, 8 vacuum worktables with digital position display, interchangeable angle gearbox. Usable length of the workpiece support: 3200 mm, width of the workpiece support: 925 mm. Bwjdpfxjx Iulwe Ap Isw

Condition: used, functionality: unexamined, Ferwood Code: AGG0062 – Manufacturer Code: 6314A0111 – Condition: Used – Functionality: Not tested – Compatible Machine: CNC BIESSE ROVER 23/24/27/30/346 – If interested, we offer an overhaul service, please contact us. Weight and dimensions for transport: 2.5 kg, 20x20x20 cm Bjdpfxevu Auuo Ap Ieww

Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Bjdpfjkvrxuex Ap Ioww Front protection and safety system with carpets Perimeter protection grids Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90