Used Biesse Rover 24 L for sale (324)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Machining center Biesse Rover B 4.40 Working area X: 3640 mm Working area Y: 1342 mm Working area Z: 150 mm Beam worktable with suction cups 3-axis electrospindle Vertical drilling heads: 13 Nwsdpfx Adsykqfdsbsc Horizontal drilling heads in X direction: 4 Horizontal drilling heads in Y direction: 4 Fixed blade in X direction 12-position tool changer Software: BIESSEWORKS ADVANCED Vacuum pump BECKER VTLF 250 Safety mats Protective nets attached to the machine

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Biesse Rover A 1542 CNC Machining Center Nodpeyh Nd Rjfx Adbswc Working area X: 4140 mm Working area Y: 1560 mm Working area Z: 245 mm 5-axis electrospindle, HSK-F63 interface Vertical drilling heads: 17 Horizontal drilling heads in X: 6 Horizontal drilling heads in Y: 4 Grooving saw blade 25-position tool changer Worktable with 8 beams

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350 Nedpfx Adou Tqb Ujbowc

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) - Goose-neck type - Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) - Numerical Control with Software Biesse Works - Safety cabin (enclosure) of the working head - Front emergency carpets - No. 1 In-feeding table (with motorized belts) SX - No. 2 Workpieces fixing clamps (for the panels introduction in the working area) - No. 1 Out-feeding table (with motorized belts) DX - Max. useful working area (X - Y - Z) mm 3000 x 1000 x 60 - Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Nedpodh Tf Usfx Adbjwc (for longer panels than mm 2000, minimum thickness is mm 13) - Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1000 x 60 - Total installed power Kw 20 BOTTOM WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe)

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, 24 vertical spindles, 10 horizontal spindles, 7-position tool changer, 8 vacuum worktables with digital position display, interchangeable angle gearbox. Usable length of the workpiece support: 3200 mm, width of the workpiece support: 925 mm. Njdex Iulwjpfx Adbswc

Condition: used, machine/vehicle number: 008377, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Nwodpsx Swb Ajfx Adbec Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 10

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 09220, functionality: fully functional, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 663 mm, workpiece height (max.): 275 mm, MACHINE DETAILS Configuration: 3 (see brochure as PDF) Tool configuration: P1/A1 Travel X / Y / Z: 6200 / 1935 / 275 mm Speed: 100 / 300 / 300 m/min Compressed air supply Compressed air consumption: 400 Nl/min Operating pressure: 7 – 7.5 bar Compressed air connection: Ø 3/8" Extraction Extraction air consumption: 5,300 – 7,632 m³/h Air velocity at main connection: 30 m/s Static pressure at main connection: 2,800 – 3,000 Pa Extraction connection: Ø 250 mm MACHINE DETAILS Installation dimensions: approx. 9.6 x 4.7 x 2.0 m Transport weight: 7200 kg Installed power: 22 – 52 kVA Transport packages: 4 Nwodpfxswa Sduo Adboc Documentation available: Yes CE marking available: Yes

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC machining center Working field X: 3200 mm Nodpfx Asyfwuhedbewc Working field Y: 1260 mm Z-axis stroke: 165 mm 3-axis electrospindle Vertical drilling heads: 10 Horizontal drilling heads in X direction: 4 Horizontal drilling heads in Y direction: 2 Fixed saw unit in X direction Horizontal group 16-position tool changer located at the rear of the machine 6-beam worktable Safety mats Available September 2026

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Nodjxraimjpfx Adbowc Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Year of construction: 2008, condition: reconditioned (used), machine/vehicle number: 22589, MC with traverse table Model: Rover A3 30 Year: 2008 4 axes Working area: x=3060 mm y=1260 mm z=150 mm 6 working balks L=1200 Nwedolu Hhcopfx Adbec available in August 2023 Tooling not included

Condition: used, Ferwood Code: RU0000986 - Condition: Used - Compatible Machine: CNC BIESSE ROVER - If interested we offer a revision service, contact us. Nodpfxjvazkfe Adbjwc

Condition: ready for operation (used), Technical characteristics CNC ROVER A machining center BIESSE's Rover A series machining centers are specially designed for daily milling and drilling operations on panels, doors, component doors and furniture. The mobile gantry structure is made of extra-thick electro-welded sheet steel and stiffening hangers to minimize distortion during machining. For movement of the moving column along the longitudinal axis (X axis) and in the transverse direction (Y axis), BIESSE has opted for a rack-and-pinion solution, enabling higher acceleration and speed parameters than those achievable with a ballscrew. Controlled axis motors : Brushless motors, controlled by digital actuators. Hardened steel controlled axis guides. Automatic centralized lubrication system. Machine equipped with two vacuum pumps, 250 m3/h and 300 m3/h. Activation of vacuum and pneumatic systems is available from any point along the machine's X work zone. Nsdpfx Adjtqi U Iobowc Working range (vertical electrospindle axis): X= 5540 mm Y= 1560 mm for 4 axes, 1570 for 5 axes Z= 230 mm with modules H=74 mm /Configuration 1B and 3B Z = 275 mm with modules H=29 mm / Configuration 1B and 3B 8 ATS aluminum worktops 1 X-axis metric ruler for correct positioning of worktops 8 metric rulers on Y axis for correct positioning of workpiece clamping systems 32 carriages 132 x 132 x H 41.5 mm Each carriage rotates the modules every 15° 32 plugs for closing the carriages Additional quick-fit connections for special jigs EPS (Electronic Positioning System) automatic positioning for worktops up to 1550 mm, allowing automatic positioning of clamping devices at selected points. An entire half machining zone can be positioned in hidden time while the machine is machining (avoiding major productivity losses). Each carriage is equipped with a blowing system to ensure that the machining plane on which it slides is always clean. 2 X-shaped machining zones Reference systems : Rear line stop with 115 mm travel Intermediate line stop positioned at 685 mm Front line stop positioned at 1348 mm 4 side stops with 140 mm travel (2 left and 2 right) 2 additional side stops (1 left and 1 right) 1 retractable linear stop for raw panels. Vacuum module 132 x 146 Vacuum module 132 x 75 Vacuum module 132 × 54 CFT system : Vacuum system for aluminum CFT modules, for left work area Aluminum vacuum module, dimensions : X=1250 mm, Y=625 mm, H=74 mm, for modular worktops With this solution, it is possible to prepare a continuous surface for thin/flexible panels or for nesting, bending, etc Uniclamp vice Support base 130 x 130 mm Flat disc 130 x 130 mm Double-movement Uniclamp vice Circular support base, diameter 130 mm Clamping workpieces thicknesses from 40 to 98 mm Horizontal vice, height 74 mm Chip and waste conveyor belt Configuration (3B) : Machining unit 5 axis 13kW electrospindle, up to 20000 RPM HSK F63 spindle Liquid-cooled C axis sewing : 360° continuous rotation Maximum undercut angle: -5°. Drilling unit BH 17 L drilling head Up to 17 independent tools Single and multiple drilling Work on all 5 faces of the workpiece and grooves with X-direction blade on the upper face. 10 independent vertical spindles, 32 mm centres 5 in X direction 5 in Y direction 3 opposite independent horizontal spindles, 32 mm pitch 2 in X direction 1 in Y direction 1 circular blade ⌀ 120 mm For groove in X direction (useful cut 25 mm) Multifunctional unit 1 circular blade ⌀ 300 mm 2 independent Z axes (1 for the electro-spindle and 1 for the drilling and multi

Condition: ready for operation (used), Technical characteristics X axis travel : 3290 mm Y axis travel : 1100 mm Z axis travel : 326 mm Part passage : 170 mm Electrospindle : 5-axis spindle, 11 kW HSK F63 chuck Revolver-type tool magazine, 16 tool holders Tool magazine at end of work surface, 10 tool holders BH26 2L drilling unit : Vertical and horizontal drilling unit + grooving unit 16 vertical drill bits, 32 mm centres (8 X-oriented and 8 Y-oriented) 8 horizontal drill bits, 32-mm pitch (4 X-oriented and 4 Y-oriented) 2 grooving blades, diameter 120 mm, for grooving in X and Y (useful cut 25 mm) Independent Z drilling unit to optimize machining times Work surface : Nodpfx Asuaz H Iodbjwc NC-controlled worktable with motorized moving beams 6 ATS beams with automatic positioning (EPS) and suction cups 3 steerable suction cups with motorized movement per beam 1 Vacuum pumps 250 m3/h Controls : On Windows PC RM850 remote control with integrated LCD screen 2 pedals for cycle start Controlled by BiesseWorks software BiesseWorks Advanced software machine version: Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Collision management Tooling set and parametric cones supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 17 Kw Motor: 18 CV Overall dimensions Lenght: 5412-5912 mm Width: 5120 mm Height: 2910 mm

Condition: ready for operation (used), Technical characteristics 3-axis spindle, 11 kW, 1000 to 24000 rpm Nwjdst Rrdaopfx Adbsc 10 Y / 10X vertical drilling unit 6 X / 2 Y horizontal drilling unit XNG digital control 8-position on-board tool loader + pick-up loader on frame Machine to be restarted dimension plan de travail en Y1640 mm Dimension plan de travail en X3430 mm Caractéristiques usinageDrilling unitOnboard tool chargerNesting table Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics 8 suction cup beams + vices Electrospindle 10.5 CV ISO 30 8 on-board tool carrier charger 20 vertical spindles and 4 horizontal spindles drilling unit Machine to be restarted dimension plan de travail en Y1630 mm Dimension plan de travail en X3430 mm dimension plan de travail en Z185 mm Nombre de poutres8 Caractéristiques usinageEvacuation conveyorVacuum pump Capacité pompe à vide100 m3/h Nwodetqkbbopfx Adbsc Power and Motors Overall dimensions

Condition: used, Year of construction: 2005, 2005 BIESSE ROVER B 4.40 FT 3-axis CNC machining center Technical features in the last photo Engine hours on: 45,343 Machine hours in automatic operation (work): 27,267 Nwsdpfewmdynjx Adbjc

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Short Description • X axis working area: 6735 mm • Y axis working area: 1650 mm • Working Table: Pod and Rail • Main Electrospindle Power: 13.2 kW • Number of Controlled Axes: 4 axes • Max Edge Height: 60 mm • Total Number of Drilling Spindles: 20 • Total Number of Tool Changer Positions: 16 Long Description • Subfamily: CNC Machining Centers for Routing, Drilling, and Edgebanding • Type of Work: Edgebanding, Drilling, Routing • Maximum Panel Passage: 60 mm • Number of Working Fields: 2 • Working Table: Pod and Rail • Number of Rails: 10 • Pod Position Indicators • Vacuum Cups for Securing Workpieces • Number of Vacuum Cups: 40 • Clamps for Securing Workpieces • Vacuum Pump • Number of Pumps: 1 • Single Pump Capacity: 250 m³/h • Boring Units: 1 (Top) • Vertical Boring Spindles: 20 • Horizontal Boring Spindles in X: 4 Nwsdpeycvcxofx Adbjc • Horizontal Boring Spindles in Y: 4 • Router Spindles: 1 (Top) • Number of Controlled Axes: 4 • Automatic Tool Changer • Motor Power: 13.2 kW • Edgebanding Operating Units: 1 • Gluing Unit: Mounted on Main Beam • Glue Pot for Hot-Melt Adhesive • Edge Coil Magazine • Number of Magazine Positions: 4 • Grooving Unit: 2 Top Units, Fixed for Grooving in X and Y • Tool Magazine: 1, with 16 Positions • Tools Positioned on the Machining Head • Combination Head for Edge Scraping and Glue Scraping • Air Jet Panel Edge Cleaning Unit • Control System: PC Control • Machine Programming Software: Bsolid • Protective Structure for Operating Units with Safety Sensors • Waste Chip Conveyor

Condition: good (used), Year of construction: 1997, functionality: fully functional, CNC machining center Biesse Rover 20 Year of construction 1997 Manufacturer Biesse Italy S/N 64851 Working area 2.893 x 950 mm 6 traverses with 12 vacuum cups Milling spindle with ISO 30 tool holder 3.6 kW, drilling unit: 10 vertical drills 6 horizontal drills Grooving saw, Nwedpfotpuu Djx Adbsc 6-fold tool changer. NC410 control unit Color screen Total power consumption 10 Kw 400 V , 50 Hz with safety fence ( not on the pictures ) 3 step mats with Becker vacuum pump, 3,0 Kw CE marked 1900 kg

Condition: used, Year of construction: 2006, Numerical Control XP 600 Working range on X-axis mm 3060 Working range on Y axis mm 1140 Working range in Z axis mm 160 N ° 2 work fields Bar worktop No. 6 adjustable bars for suction cup support No. of pneumatic bakelite bars for panel lifting (?) No. 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis 12 kW motor 10-position tool change system - positioned on the drilling head of the machine, ISO 30 type cones BH19L drilling head with 18 spindles arranged as follows: - No. 7 verticals on X axis - N° 6 verticals in Y axis - N° 4 horizontal on X axis - No. 2 horizontals on Y axis - No. 1 independent blade group for making grooves on the X axis Front protection and safety system with photocells Automatic lubrication system (?) Air conditioning system for cooling and cleaning of machine control Vacuum pump mc/h 250 TECHNICAL DETAILS TO BE CHECKED Nedpfx Adev Aacfebewc

Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console Nodpfx Adjkvrxusbewc No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Front protection and safety system with carpets Perimeter protection grids Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Nsdpfx Aew D Dhaedbjwc

Condition: used, Numerical Control NC 1000 Software Biesse Works Working field in X axis 3685 mm Working field in Y axis 1290 mm Working stroke in Z axis 200 mm - piece passage 70 mm FT nesting full plane worktable Automatic loading system with side lifting table N ° 1 vertical electrospindle, with automatic tool change, Automatic tool change system with 18 positions - positioned on the rear of the machine Boring head with independent spindles arranged as follows: - N ° 7 vertical in X axis - N ° 7 vertical in Y axis - N ° 2 horizontal in X axis - N ° 2 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE Nedpfxewufv Ts Adbewc

Condition: used, Year of construction: 2023, Numerical Control BH 660 with BSolid Working range on X-axis mm 4320 Working range on Y axis mm 1660 Working range on Z axis mm 200 No. 2 work fields on X axis Bar worktop No. 8 adjustable bars for suction cup support No. 8 pneumatic bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 5-axis vertical electrospindle, with automatic tool change, liquid cooling, HSK63 type cones, KW 13 (HP 17.4) Automatic tool change system with 16 positions with revolver positioned along the X axis on the back of the machine Automatic tool magazine with 12 positions positioned on the machine side BH24 L drilling head with spindles arranged as follows: - No. 8 verticals on X axis - N° 6 verticals in Y axis - N° 6 horizontal on X axis - N° 4 horizontal in Y axis - N° 1 Integrated blade for making grooves Chip evacuation system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning of machine control 250m/c vacuum pump TECHNICAL DETAILS TO BE CHECKED Nsdpfjwgc D Eox Adbowc

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Njdpfx Adow D E A Ejbowc

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Nwodpougpwnsfx Adbec Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED