CNC Machine Centres With Pod And Rail

BIESSE ROVER A 1232

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A • Number of power supply phases 3 • Installed power 18.66 kW • Frequency 50 Hz • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm Kdodpfxozugwpo Akpeu • Maximum tool length 110 mm • Maximum tool weight 7.5 kg • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,300 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, gearing type: automatic, battery voltage: 80 V, battery weight: 1,580 kg, fork length: 1,150 mm, tire condition: 95 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 6,400 kg, total height: 2,200 mm, Equipment: cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, For sale: Used Toyota electric forklift, type 8FBMT 35, year 2018, with triplex free lift mast! Overall height: 2.2 m Lift height: 4.7 m Load capacity: 3,500 kg Solid rubber tires, 95% Hydraulic sideshift Fork length: 115 cm Includes charger Both drive motors and the rear axle have already been overhauled on the forklift, and the battery has also been replaced! Kodpexzr E Esfx Akpedu Forklift is immediately available! Forklift is ready for immediate use! Forklift can be inspected and test-driven at our premises! Transport can be organized on request!

Condition: good (used), Year of construction: 2008, I sell the panel beam saw BIESSE SELCO EB75. Year 2008. Cutting size 3800x3800mm. Cutting height 75mm. Main motor 7,5kW Scoring motor 2,2kW Total area covered W.5422mm x D.7688mm Gripper with pneumatic regulation Kdodpsvw Nkhsfx Akpsu Side alignment top roller with pneumatic stroke. Optimising software included. Very good condition. Available immediately.

Condition: used, Year of construction: 2022, SCM Morbidelli N100 22-31 PROSPACE Year of manufacture: 2022 Condition: Used, recently serviced Machine type: CNC machining center Model: 22-31 PROSPACE Machine weight: approx. 4,000 kg Work table: Complete nesting table Technical data 3-axis CNC machining center 9.5 kW electric spindle HSK tool clamping system 13-position linear tool changer, automatic Drilling unit Complete work table for nesting applications 2 vacuum pumps Automatic tool length measurement TECPAD control panel SCM Maestro software 3 software licenses: Maestro Base Maestro Nesting Maestro Freeform Application areas Nesting Drilling Milling and contour machining Freeform machining Complete CNC machining of panels and components Included in the scope of supply Complete nesting table 9.5 kW electric spindle Drilling unit 2 vacuum pumps TECPAD control panel 13-position HSK linear tool magazine Automatic tool length measurement system SCM Maestro software with Base, Nesting, and Freeform licenses Kedpozwfivsfx Akpsdu

Condition: used, machine/vehicle number: 008479, Max. machining width: 1650 mm Kjdpfey Edqwsx Akpedu Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table Kdodpozuyl Tjfx Akpsu - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Kjdswuz Ekjpfx Akpjdu Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: excellent (used), Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C, A axes: available Swivel machining: 2 working areas for swivel machining Work table: ATS-HTS-EPS Automatic console positioning system EPS 10 automatically positionable consoles 2 locating pins per console 5-axis milling spindle: Power: 9 kW / 11 kW at 60 Hz Speed: up to 24,000 rpm Tool holder: HSK-F63 Liquid-cooled Drilling head BH 26 16 vertical drilling spindles 4 horizontal drilling spindles in the X direction 2 grooving units for grooves in the X and Y directions Vertical drilling spindles 16, Horizontal drilling spindle X = Tool changer: Chain tool changer with 21 tool positions Clamping systems: Uniclamp clamping system - 6 pieces Control system: BIESSE XP 600 Chip removal: Motorized conveyor belts for the removal of chips and machining waste Vacuum pump BECKER: Motor power 5.5 kW Conveying capacity: 244/286 m³/h Additional equipment: Numerous vacuum suction cups; 6 UNICLAMP clamping systems; Numerous HSK 63 tool holders; 2 large saw blades in the tool magazine Compressed air: 7-7.5 bar Total power: 25.3 kW Weight: 4200 kg Kdjdpfx Aozxbhwokpou

Condition: excellent (used), Gluing machine Kedpfottu Rijx Akpedu Guillotine cross-cut saws milling cutter Scraper Polishing machine

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) Kdedpfx Aeidmkrjkpeu KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)