Used Biesse Cnc for sale (335)

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT - NBC 412 Automated nesting cell Description: Rover A 3.40 FT Centralized automatic lubrication system 8 front stops + 8 back stops with sensors 1 Rh side stop with sensor Vacuum system for 2 300 m3/h pumps 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Boring head BH 18 A Revolver tool changer with 10 positions Numerical Control XP600 BiesseWorks - Advanced - machine and office version BIESSE NEST Module Arm for pieces loading and unloading, positioned on the machine beam Loading and unloading table, positioned on the LH side of the machining center Gbodewh Sfzopfx Ag Rsg CE Safety devices Rotary claw vacuum pump Mechanical presser ring with pneumatic lowering , for nesting based application (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, machine/vehicle number: 008373, Max. panel width: 2500 mm Max. panel length: 1000 mm Panel return for edgebander: Left Gedpfsx Swd Rjx Ag Rebg

Condition: excellent (used), Year of construction: 2009, MC HSK 63 F angle unit for angled drilling below 7 degrees Gedpfx Aowmr Uysg Rebg Excellent condition See photos Location: from stock, 54634 Bitburg - available immediately -

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, 24 vertical spindles, 10 horizontal spindles, 7-position tool changer, 8 vacuum worktables with digital position display, interchangeable angle gearbox. Usable length of the workpiece support: 3200 mm, width of the workpiece support: 925 mm. Gbodpfsx Iulwsx Ag Reg

Condition: used, Year of construction: 2018, functionality: fully functional, Biesse Akron 1400 Edgebander. Genuine UK Machine available for demonstration: £10,000 + VAT This machine is suited for flush or bevel trimming of edgebanding materials upto 8mm thick (Max 3mm on the coil). Currently the machine is fitted with Straight cutters, but combination cutters can be fitted for radius trimming. This machine DOES NOT do corner rounding. But does have the following units: - Pre-Milling. EVA Hot Melt Gluing System. End Snipping Saws (Straight or Chamfer cut). Rough Trim (Top & Bottom). Fine Trim (Top & Bottom). Glue line scraping (Top & Bottom). Godpfx Agsxrwm Ne Robg

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Godpoidmkrsfx Ag Rsbg Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: used, Year of construction: 2010, Biesse Rover A 3.40 FT K2 Description: Working fields: X = 3685 mm; Y = 1290 mm; Z = 160 mm Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum tank 300 m3/h rotary claw vacuum pump12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Gbedexwcb Njpfx Ag Rog Numerical Control XP600 BIESSEWORKS - Advanced programming system - machine version BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with mats Prearrangement for mechanical copying unit (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, machine/vehicle number: 008250, Position 1: Single Edgebanders BIESSE-STREAM B1 9.0 Position 2: Roller Conveyors BIESSE-STREAM B1 9.0 Position 3: Single Edgebanders BIESSE-STREAM B1 9.0 Gsdex Dipmepfx Ag Rebg

Condition: good (used), Year of construction: 2009, Manufacturer BIESSE Model UNICLAMP Machine type: Mechanical clamping system Year of manufacture: 2009 Item number: 7350171 Technical specifications Quantity: 5 Clamping height: 15 - 55 Height: 48 mm, with quick-release coupling Suitable for Biesse Additional information * Sales unit includes 5 used Uniclamp clamping elements * Clamping elements for clamping strips, suitable for Godpfx Agewmr Tvo Rjbg Biesse console tables with ATS Location: From stock, 54634 Bitburg - Available immediately -

Condition: excellent (used), Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Electronic Programmer RT 486 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) No. 6 Left-side + No. 6 Right-side Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Gsdpsdi R R Refx Ag Robg Bottom vertical units/supports (N°) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Total installed power (Kw) 11,5

Condition: used, machine/vehicle number: 007816, Position 1: Automated Warehouse BIESSE-SELCO SK 450 Position 2: Beam panel saws with automatic warehouse BIESSE-SELCO SK 450 Gbsdpjwuufqefx Ag Rsg

Condition: excellent (used), Year of construction: 2009, MC Biesse HSK 63 F angle unit with 2 outputs Instructions Gbsdpfx Aowmtaqog Rsg Wrench Collet Location: from stock, 54634 Bitburg - available immediately -

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader Gbjdpfxoflc T Sj Ag Rsg No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: used, machine/vehicle number: 007811, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 3: Panel Turning Device BIESSE - RBO-STREAM SB Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 5: Automatic Drilling Machine BIESSE - RBO-STREAM SB Gedpfx Ajv Dyxcsg Rebg Position 6: Automatic Drilling Machine BIESSE - RBO-STREAM SB Position 7: Panel Turning Device BIESSE - RBO-STREAM SB Position 8: Panel Stacking and Offloading BIESSE - RBO-STREAM SB

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables Gbedpfx Ajd Rg Dzeg Rog N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B AIRTEC Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B AIRTEC Gjdpfx Aswukywog Rsbg

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Gjdpfx Asd Rg Dpjg Robg Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting Godpfxocggy Ss Ag Rsbg - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min Goded Nviqspfx Ag Rsbg - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates Gjdscr U Urspfx Ag Robg SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) Godpfxog Urn Es Ag Rsbg - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), LOADER (SINGLE-CAGE) Vacuum system with its pump Top holding bar deplacement (pivoting) of 180° Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting In-side lifting table, surface with motorized-rollers Front-side sliding door (metal grid) to introduce the stack of the panels Separated electric and command panel Gbjdpsd Tywgefx Ag Rsg Outside rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), Working capacity (cycles/min): 12-15 Min/Max panels thickness mm 10 - 40 Min dimensions of the panels mm 250 x 320 (estimated) Max dimensions of the panels mm 1200 x 3000 Total installed motor power KW 11

Condition: excellent (used), Numerical Control Type NC 400 (Software) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Gbodpfx Aegk T Ttsg Rjg Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 48 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Loader (Bridge Frame) "RBO" Double Station, Mod. Advantage C B) Motorized Roller table "RBO" with turning device 90° (length to crosswise) C) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 Centre A: No. 2 Electro-spindles ISO 30 (Kw 3,7 each) with tool-holder magazine with 3 places each. Centre B: No. 2 predispositions for the installation of other 2 electro-spindles No. 2 tool-holder magazines (revolver) with 56 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Connection transfer, with upsidedown turning machine (180°) "RBO" Mod. Ribaltatore E) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units(1 left+1 right)with 4 BH18 heads with 18 spindles(36 right + 36 left),total 72 Centre A: No. 2 Electro-spindles ISO 30 (Kw 4,5 each) with 3 tool-holder magazine each. Centre B: No. 2 predispositions to install another 2 electro-spindles No. 2 tool-holder magazines (chain) with 60 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit No.2 horizontal units(1 right+1 left)with 5 insertion nozzles each (5 left + 5 right), tot. 10 nozzles Gbodpfxegvdkgs Ag Rog G) Stacker (Bridge Frame) "RBO" Double Station, Mod. Advantage SC

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) Gbedpfx Agsd Tyvxj Reg - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11