Used Bf 30 Super for sale (58,285)

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored Fsdsxr Avijpfx Adajpb

Condition: used, Year of construction: 2023, tank 1.300 l Pressure of pump 8 / 20 / 80 bar control Schütze / Contactors total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Fpsdpfxswgd Ire Adaeb Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: used, Technical details: faceplate diameter: 785 mm revolution per minute: 4,5 - 180 (Planscheibe) U/min Speed of boring spindles: 4,5 - 900 U/min. tool taper: SK50 weight of the machine ca.: 3,7 t space requirements of the machine approx.: 3,6x1,3x1,6 m spare part for a table type Boring and Milling Machine WMW BFT 130 with with headstock incomplete (as it can be seen on the picture!!) - diameter facing of a flange:0-1400mm - diameter for drilling: max. 800mm Fpedpfx Adeu Nk Ehoasb - diameter at face turning: 0-1400mm - spindle diameter: 130mm - drilling depth: 1000mm *

Condition: new, Year of construction: 2024, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, warranty duration: 12 months, NEW generation of the TRUMPF TruFiber Unsurpassed beam quality: Superior precision and long-term power consistency thanks to Active Power Control. Power redundancy: Built-in redundancy ensures stable operation without unforeseen downtime. Excellent power stability: ±0.5% power stability guarantees consistent cutting results every time. Highest safety standards: Meets the highest safety level: Performance Level e (PLe). Versatile material cutting: Easily processes mild steel, stainless steel and highly reactive materials with ease and reliability. PRECITEC cutting unit Optical high performance: Offers superior cutting speed due to low weight. Precision and accuracy: Optimized for thick materials with consistent performance. Easy maintenance: Designed for quick and easy maintenance. Intuitive control system Fedevahmajpfx Adajpb CypCut bus control system with simple online programming ensures easy set-up and fast production. The extra-large HMI display provides a clean user interface, with real-time monitoring of the cutting process. Comprehensive cutting parameters cover the entire range of cutting thicknesses, enabling a quick start while ensuring professional results. LANTEK Expert CUT MTB included for powerful nesting and convenient offline job preparation. Excellent stability and accuracy Welded and structurally optimized machine bed for maximum torsional rigidity and accurate cut parts. Plate-welded cross beam offers high thermal stability and accuracy. Premium drive technology enables precise and consistent operation. Full numerical structural analysis (FEM) ensures optimum structural integrity and performance.

Condition: new, 3000 mm Working width 360 mm roll diameter 60,0 mm Fsdpfxexaai Aj Adajpb weight max. in kg 900 kg height adjustment 620 - 1055 mm weight 107 kg Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces

Condition: used, Mounting rails, sliding set, pipe clamps, pipe fastening, pipe clamp holder, WBD holder, clamping bracket, U-holder -Manufacturer: Sikla, 15 pieces of clamping brackets for attaching carrier profile F -Type: SB F 100-16 .: 113 082 -Price/tax: complete Fodpfoq Syuqox Adaepb -Dimension: 160/130/H30 mm -Weight: 0.7 kg/pc.

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 Fpodpfx Aswz Nzmedajb - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: used, Year of construction: 2023, tank 1.300 l Pressure of pump 8 / 20 / 80 bar control Schütze / Contactors total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW Fpsdpswgd I Esfx Adasb - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: used, Technical details: spindle diameter: 130 mm drill depth: 1380 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 380 mm w-axis: 900 Bohrspindelvorschub mm U-axis: 320 Planschiebervorschub mm control: auf Wunsch tool taper: ISO SK50 revolution per minute: Planschieber:4,5-180 U/min rpm - drive spindle: 4,5-900 U/min feed:: x/y: 5-2000 total power requirement: ca. 40 kW weight of the machine ca.: ca.< 35 + AZusatzeinrichtungen t The machine can be offered in 4 different sales options. Please choose! 1. the machine is in mint mechanical condition. As is/is. 2. the machine as is/is incl. plate field 4000x2000x300mm = stock no. 1101081 3. the machine is newly wired, with new electrical cabinet, digital display, with 4-axis, AC drives from Siemens, axis motors from Siemens (50A/31Nm) with 12 months warranty on all new parts. 4. further additional equipment can be offered as an option. Such as coolant system, chip conveyor, enclosure etc. We should discuss this on the table with your technical staff. i.D. Fedpfx Ajvr S Uledaspb *

Condition: new, empty load weight: 844 kg, maximum load weight: 2,656 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.8 m³, color: silver, construction height: 990 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, incl. composite floor (ultra-reinforced honeycomb core floor) - extremely resilient and durable, * IMMEDIATELY AVAILABLE * incl. composite floor (ultra-reinforced honeycomb core floor) - extremely resilient and durable! Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available!!! - TÜV: 2 years - Floor: composite floor - Gross vehicle weight: 3,500 kg - Unladen weight: 844 kg - Payload: 2,656 kg - Internal dimensions: 335 x 180 x 30 cm (L x W x H) - External dimensions: 468 x 186 x 99 cm - Loading sill height: 69 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic 500 kg - Incl. vehicle documents (letter) Vehicle documents (letter) - 100 km/h: at extra charge Standard equipment: - New dropside hinges incl. very simple attachment option for a cargo net, among other things. - Anodized double-walled aluminium drop sides - All drop sides foldable all round - All drop sides removable - Sturdy welded steel frame - Frame completely hot-dip galvanized - Many sturdy cross members for high point loading - Additional longitudinal struts welded in throughout - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV-certified - Lashing hooks on the frame - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy eccentric locks - Reinforced, V-drawbar - 13-pin plug - reversing lights Plug - Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Automatic center support wheel incl. Special equipment: - Parabolic suspension incl. shock absorber for 100 km/h fitted instead of rubber-sprung axles. - Parabolic spring axle with shock absorber for absolute driving comfort! - Composite floor (honeycomb core plastic floor) Composite is made up of various layers of these fibers, like a kind of lasagne. These two materials create a sustainable, extremely stable and lightweight board. The core of the composite floor consists of a honeycomb structure with a top layer on both sides. The whole is fused together to create a stable unit. The manufacturer of the composite panels comes from the anti-ballistic industry. The top layer is therefore constructed like that of a bulletproof vest. At HAPERT Aanhangwagens, all innovations are extensively tested. This naturally also applies to the new composite floor. It has been thoroughly tested by us under normal conditions of use for impact and tensile strength, shear force, wear and resistance to weather conditions, among other things. Take a look at the load test: ?v=_gpat0vbiTc Accessories optionally available: - Emergency hand pump mounted with electric operation (at extra charge) - Drive-on package: 2x aluminum drive-on rails integrated reinforced - 2 rotating crank supports reinforced version - Car2Trailer charging system (permanent charging of the battery in the tipper via towing vehicle) - High grille at the front, 70cm - Tarpaulin + bows in various heights, - Supports, grille, grids, bows in various heights, - Tiltable cover + bows in various heights, - Support, grille, bows, bows in various heights. Supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are Brian James / Humbaur / Hapert / Unsinn / Fsdpju Hr Nvjfx Adajpb

Condition: good (used), Year of construction: 2000, Connection value: 430kW Fsdpeip T T Hofx Adaepb Dimension: Total length: 10750mm Width: 3400mm Height: 3900mm

Condition: used, "CB" Ferrari Milling Machine Model B130 CNC ELEX E-550 Complete with standard equipment Fodpoxwvi Tefx Adaspb X-axis travel: 650 mm Y-axis travel: 320 mm Z-axis travel: 320 mm Spindle speed: 22,000 rpm ISO 40 ATC with 18 positions

Condition: new, Year of construction: 2024, neu 2024 8319 prompt, Zwischenverkauf v Türkei 77990 € 1326.78 € 1 70200 € 200 to 3050 mm Y1 / Y2 / X und R Achse 210 mm 2550 mm 250 mm 445 mm hydraulisch 100 mm/s 7 mm/s 73 mm/s 620 (mit optionaler R-Ach mm 250 mm/s 858 mm 104 mm 150 l 15 kW 3750 mm 1390 mm 2500 mm 8160 kg 4 axes (Y1, Y2, X and R axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB Fodpfowiqp Iox Adajpb CNC controlled back gauge with linear guide and ball screw spindles CNC CONTROLLED CROWNING TABLE intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH ADVANTGES OF PBF SERIES: - compact structure - low cost due to serial production of standardised models without restrictions in quality and accuracy OPTION: CNC controlled crowning table incl. CNC controlled R-axis (adjustment range in X = 500 mm) incl. DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES! (sample photo)

Condition: excellent (used), Year of construction: 2021, Coated web width 1315 mm Max. web width 1330 mm Max Core width with expanding chucks 1300 mm Max Core width with Standard cones. 1340 mm Minimum web width 650 mm Unwinder reel diameter 1000 mm Rewinder reel diameter. 1000 mm Core size - unwinder: 3”= 76 mm & 6”= 152 mm - rewinder 6”= 152 mm Max. web tension Fjdswqdikopfx Adajpb - unwinder 40 kg (400 N) - rewinder 55 kg (550 N) Taper tension on rewinder up to 60% of the set value. Min. web tension - unwinder: 2 kg (20 N) - rewinder: 4 kg (40 N) Max reel weight: 1.000 kg Max mechanical speed: 450 m/min

Condition: excellent (used), Year of construction: 2002, Disc diameter 50 mm 7.5 kW motor 3 sorters Fsdsuxnpcepfx Adaopb The length of the automatic feeder is 4 m The length of the receiving feeder is 6 m Cutting cross-section 300x100

Condition: new, Year of construction: 2025, Through-feed optimizing saw controlled by numeric control and personal computer for the optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Supercut 300 is an extremely fast optimizer able to revolutionize your firm's production system. Really Fast: an exclusive dual workpiece feed system combined with an ultra-rapid cutting unit make Supercut 300 unique. EXTREMELY ROBUST Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Fast and full optimization maintaining a notable compactness of the machine Feeding system with Brushless servo driven 18 Nm motor. Power motor blade HP=7,5. Eight idle rollers under the belt of the in-feed conveyor. Fpjdpfx Asfhgz Ijdaob RELIABLE AND SAFE Double steel marking platform. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Internal lighting.

Condition: ready for operation (used), Union boring mill BFK 130/1 x-axis 3500 mm Fpsdpfoxx Ny Usx Adaeb y-axis 2000 mm z-axis 1250 mm table surface area 1600 x 2000 mm movable table load 12.5 t tool taper SK50 Angle heads 0° - 180° Weight approx. 35 t Milling heads Face plate

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. Fpodpox Tg Axofx Adajb These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Condition: used, axle configuration: 3 axles, first registration: 10/2005, color: other, Year of construction: 2005, Empty weight: 3.750 kg Fpjdpfjucxu Iex Adasb Axle 1: left 12 mm right 7 mm Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new Fpodpfx Adjhq Txheaob 02x brake/steering rollers, new 01x angle set, new for mounting the worktop 08x safety hook, new Material color: compl. galvanized

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Fjdpfjtp I S Aox Adaspb

Condition: excellent (used), CATALOG NUMBER 7221 Fpedpfxsx Syhxo Adajb TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Fpodpfxjhq Twyo Adasb Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 01x Angle set, new for fixing the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 02x swivel castors, new 02x brake / swivel castors, new 01x angle set, new for mounting the worktop 04x safety hook, new Material color: compl. galvanized Fjdpfx Adjhq Txwoajpb

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 01x angle set, new for fixing the worktop 04x safety hook, new Fpedpfx Adehq Tqdoasb Material color: compl. galvanized