Used Berlin for sale (2,404)

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Kjdpfxjx Hff So Aa Ejnf

Condition: like new (used), functionality: fully functional, power: 168 kW (228.42 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 19,450 kg, empty load weight: 19,450 kg, operation weight: 19,450 kg, tire size: 26.5R25, tire condition: 90 %, emission class: euro5, shovel volume: 3.3 m³, Year of construction: 2023, operating hours: 1,310 h, Equipment: ABS, UVV, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, low noise, onboard computer, Hyundai HL960A Wheel Loader Year of manufacture: 2023 Operating hours: 1310 Bucket with cutting edge 3.3 m³ 40 km/h machine Rain protection cover Brake accumulator Standard rear counterweight 870 kg Smart Key + Start/Stop button 4 LED cabin lights LED beacon Rearview camera Knedpfowwt N Hox Aa Eof LED driving headlights Combination LED light Piping for 3rd hydraulic circuit Central lubrication system Beka Piping for quick coupler Joystick steering Standard lifting frame BKT-GP (Hook On) (3.3 m³) With emergency steering Vibration damping Rear mudguards 5-speed transmission (torque converter) Quick coupler ISO SW (V) Triangle radial tires Control block (MCV) with 3 sliders Air-suspended, heated seat Road homologation (DE) lo Electrohydraulic joystick Rear window blind Wheel chock Front axle with LS differential lock Differential with slip limitation

Year of construction: 2016, operating hours: 860 h, condition: used, machine/vehicle number: B00070081, Differential lock ,Hydraulics (power take off) ,Cabin ,Top tilt ,Pallet fork ,Standard bucket ,UVV. Wheel loader Gehl AL750 K, SN B00070081, 5.0t, 55 kW/75 hp, commissioning 06/17, year of construction 2016, approx. 860 bstd. Technical data according to manufacturer: Transport length: 4,443 mm Total height: 2.476 mm Height of bucket pivot point 3,474 mm Dump height at full lift: 2,710 mm Turning radius with bucket: 4,159 mm Outer turning radius: 3,409 mm Buckling angle: 45 (also at full lift height) Engine: Deutz TD 3, L4/4 74,3 hp, 55 kW Static tipping load with bucket straight: 3.587 kg bent: 2.779 kg (at full steering angle) Static tipping load with pallet fork straight: 2,882 kg folded: 2,271 kg (with full steering angle) Breakout force with bucket attached: 5,906 kg Operating weight: 4,953 kg Liter capacity with standard auxiliary hydraulics: 69.5 L/min at 200 bar With a weight of 5 tons, the 750 is one of the largest wheel loaders in Gehl's product range. With its articulated steering and speeds of up to 20 km/h, this powerhouse works absolutely agile and swiftly. The inching pedal offers maximum precision in regulating speed while providing the full power needed to lift the load. The articulated joint enables a tight turning radius. Quick turning maneuvers increase cycle times and provide excellent maneuverability in tight spaces. A switch on the joystick activates the differential lock on the front and rear axle for maximum traction, for example when picking up material. These machines offer one of the strongest breakout forces in their class, allowing you to fill the bucket to the top every time for increased productivity. Auxiliary hydraulics are standard equipment and are operated by a toggle switch integrated into the joystick. Also operated by toggle switch are lift arm and auxiliary hydraulics pressure relief. Equipment - AL750 with cab incl. door/discs and heater - 4-point hook pick-up - hydraulic - Standard auxiliary hydraulic circuit with leakage oil line and pressure relief valve - Z-kinematics with mechanical parallel guidance and return-to-dig function - 2-speed hydrostatic transmission - Floating position for lift and tilt cylinders, with engage function - Tiltable operator's platform - Differential lock (hydraulically activated, front and rear) - Mechanical articulation lock (according to SAEJ276) - Inch pedal - 405/70R20 143B with wheel arch cover Wide-base industrial tires - Particulate matter reduction system (PMS) and oxidation catalyst (Oxykat, DOC) Kedpfxek Twcrj Aa Esnf - Electro-hydraulic interlock lift mast - Battery disconnect switch - Emergency lowering valve for mast - Digital display with acoustic and visual signals - Multifunctional joystick - Steering column, adjustable in inclination and height - Drink holder - Horn - Mechanically suspended driver's seat, 7-way adjustable - Adjustable armrest - Removable rubber floor mat - 12-volt socket in the armrest - Exterior mirrors, left and right - Reversing lights and brake lights - Working light (LED) with StVZO - bucket 2000 mm with teeth, 1,04m³, 12mm Hardox scraping edge - pallet fork All offers subject to change, at the factory, used machines bought as seen, without warranty, subject to prior sale. All prices plus 19% VAT. Our general terms and conditions apply. The sale of new and

Condition: excellent (used), functionality: fully functional, mileage: 131,000 km, power: 140 kW (190.35 HP), first registration: 09/2019, fuel type: diesel, overall weight: 7,490 kg, tire condition: 70 %, axle configuration: 2 axles, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 100 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel-air, number of seats: 3, total length: 8,000 mm, total width: 2,550 mm, total height: 3,550 mm, loading space volume: 36 m³, loading space length: 6,050 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, car registration, cruise control, differential lock, electric window regulation, lane keeping assist, onboard computer, power assisted steering, soot filter, traction control, trailer coupling, ADDRESS: Straße 9, nr.33-35, 12309 Berlin-Lichtenrade (see last image) Leaf air suspension Air conditioning 2 x towing hitches / pintle and ball head Differential lock Knodpsx Iligofx Aa Esf Reversing camera Double passenger seat / 3-seater MAN BremsMatik / brake assist Lane assist Electric windows Electrically adjustable exterior mirrors Central locking / closure New general inspection (HU/TÜV) Trade-in possible Delivery possible

Condition: used, Year of construction: 2017, Technical data: Number of printing units: 8 Maximum printing width: 1270 mm Maximum web width: 1320 mm Minimum web width: 300–570 mm (depending on unwind/rewind specification) Minimum repeat length: 360 mm (ARUN system: from 380 mm) Maximum repeat length: 800 mm Repeat length adjustment: increments of 0.1 mm; correction ±2% Anilox roller internal diameter: 136.989 mm Anilox roller circumference: 500 mm Sleeve length: 1350 mm Maximum mechanical speed: 500 m/min (or 400 m/min for basic unwind/rewind) Operating printing speed depends on substrate, inks, transfer, plate type, image, screen ruling, anilox volume, etc. Corona treatment unit (Ahlbrandt) Gas drying Non-stop shafted unwind 1000 mm Non-stop shafted rewind 1000 mm Automatic viscosity control (INKSPEC) Additional drying enhancements (ECLIPSE gas burners) Infeed/outfeed extensions Automatic sleeve change systems Central chiller for temperature stabilization (Hyperchill ICE039) Ionisation system (SIMCO) Side-lay control (Erhardt+Leimer) EFFICIENCY maximum mechanical speed: 500 m/min FALCON – automatic print register and impression setting Advanced print inspection system FAST BLADE – integrated doctor blade quick-change system INKSTORM – automatic wash-up system (optional feature) Bosch Rexroth INDRAMAT direct-drive technology JOB MANAGEMENT – remote job preparation from PC PRINT QUALITY CDTS – central cylinder thermal stabilization system PCTS – thermal stabilization for anilox and plate cylinders PPP – printing plate protection DYNAMIC IMPRESSION – electronic compensation of inking unit impression forces Machine design focused on high print stability with composite graphite sleeve EASY OPERATION Intuitive touch screen Easy access to web path Doctor blade chambers with FASTBLADE quick-change system FASTADAPT – automatic chamber positioning adjustment Knedpfxex H Unve Aa Eef

Year of construction: 2000, condition: ready for operation (used), A horizontal boring and milling machine is offered: Control: Siemens Sinumerik 840 D, travel X/Y/Z: 2500mm/200mm/250mm, table clamping surface: special form length corresponding to X travel, tool holder: SK50 (DIN 2079), spindle speed: 40-2000rpm, dimensions X/Y: approx. 6400mm/2500mm, total weight: 7000kg. Inspection possible by appointment. Knedpjx Hfgisfx Aa Eef

Condition: ready for operation (used), A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement. Kedpfex Hfgvox Aa Eenf

Year of construction: 1992, condition: ready for operation (used), Application range: large threads, breakage protection: from M3.0, capacity in stainless steel: up to M10, capacity in 9SMn28: up to M10, connected load: 2000W, with automatic Z-axis feed for automation. The machine is fault-free and operational, showing signs of use. With documentation and five holders. An on-site inspection is possible. Kodpfxsx Hfgpj Aa Eonf

Condition: used, Year of construction: 2005, Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000. Knsdox E Ulxspfx Aa Esf

Year of construction: 2012, condition: ready for operation (used), Screw diameter: 40mm, screw stroke: 160mm, displacement volume: 201cm³, shot weight: 184g, injection pressure: 2000bar, shot volume: 168cm³, clamping force: 1500kN, opening force: 350kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, tie bar distance: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, weight: approx. 5000kg, operating hours: approx. 46000h. Documentation available. An on site inspection is possible. Ksdpfxsx E Adcj Aa Esnf

Year of construction: 2018, condition: ready for operation (used), A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible. Knsdpfjx E Ac Eex Aa Eef

Condition: ready for operation (used), Year of construction: 2006, A Krones labeling system with three labeling units is available. Labeling type: variable, wet glue units: 2, self-adhesive units: 1, max. labeling capacity: 72000 containers/h, gripper bore: 150mm, threaded bore: M8, pitch circle: 195mm. Machine dimensions X/Y/Z: approx. 2550mm/2550mm/2500mm. Documentation available. An on-site inspection is possible. Kodpfx Aex E Advea Ejnf

Year of construction: 2012, condition: ready for operation (used), A continuous cooling line/band cooling section Pennekamp is available. Belt width: 4500mm, pass-through height: 400mm, zones: 7, total length: approx. 23750mm. Some control components have been removed. Documentation available. An on-site inspection is possible. Knodpfox E Acfox Aa Eef

Year of construction: 2004, condition: ready for operation (used), A continuous Pennekamp cooling line/belt cooling section is available. Belt width: 3800mm, pass through height: 400mm, zones: 8, burner: Pennekamp. Includes a partially existing spray system with mixing tank. Some control components have been removed. Documentation available. An on site inspection is possible. Kjdpfx Aox E Aclea Eonf

Year of construction: 2011, condition: ready for operation (used), A defective CNC 6-spindle lathe Index is available: Speed: 10000rpm, main spindle power: 8.7kW/15kW, max. bar diameter: 22mm, tool stations: 10, travel X/Z: 62mm/85mm, travel Y: +/-12mm, max. clamping diameter: 22mm, machine dimensions X/Y/Z: approx. 3350mm/1850mm/2900mm, weight: approx. 6000kg, control: Siemens 840C. Includes tool holders, Knoll coolant system, Iemca SIR MS 22 P bar loader, HandlingTech robot cell. One spindle must be refitted with new bearings and the synchron spindle must be replaced. Documentation available. An on-site inspection is possible. Knedpjx E Ad Aefx Aa Ejf

Year of construction: 2024, condition: ready for operation (used), An Arburg injection molding machine is available. Clamping force: 400kN, max. opening force: 130kN, max. opening stroke: 350mm, min. mold height: 200mm, max. platen distance: 550mm, tie bar distance: 270mm/270mm, max. moving mold half: 180kg, ejector stroke: 125mm, ejector force: 30kN, injection unit: Euromap 70, screw diameter: 18mm, injection pressure: 2500bar, weight: approx. 2200kg, operating hours: approx. 4100h. Documentation available. An on site inspection is possible. Knjdpex E Acrsfx Aa Eef

Year of construction: 2020, condition: ready for operation (used), Clamping force: 400kN, max. opening force: 130kN, max. opening stroke: 350mm, min. mold height: 200mm, max. platen distance: 550mm, tie bar distance: 270mm/270mm, max. moving mold half: 180kg, ejector stroke: 125mm, ejector force: 30kN, injection unit: Euromap 70, screw diameter: 22mm, injection pressure: 2500bar, weight: approx. 2200kg, operating hours: approx. 12400h. Documentation available. An on site inspection is possible. Knjdpfxsx E Acxs Aa Eef

Condition: ready for operation (used), A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible. Knjdpox E Adpefx Aa Eof

Year of construction: 2009, condition: ready for operation (used), Screw diameter: 40mm, screw stroke: 160mm, displacement volume: 201cm³, shot weight: 184g, injection pressure: 2000bar, shot volume: 168cm³, clamping force: 1500kN, opening force: 350kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, tie bar distance: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, weight: approx. 5000kg, operating hours: approx. 60000h. Documentation available. An on site inspection is possible. Knodpfxex E Ac Ss Aa Eef

Year of construction: 2006, condition: ready for operation (used), Screw diameter: 40mm, clamping force: 1000kN, tie bar distance: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, ejector force: 40kN, ejector stroke: 175mm, shot volume: 188cm3, injection pressure: 1530bar. Machine dimensions X/Y/Z: approx. 4300mm/4200mm/2100mm, weight: approx. 3750kg, operating hours: approx. 73000h. Documentation available. An on-site inspection is possible. Knodpfjx E Adiex Aa Eof

Year of construction: 2004, condition: ready for operation (used), A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible. Knedpfx Aajwk Nldj Eof

Condition: ready for operation (used), Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible. Knodpfjx El Anex Aa Eef

Year of construction: 2008, condition: ready for operation (used), A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible. Kjdjx El Ahepfx Aa Esnf

Condition: ready for operation (used), Year of construction: 2018, An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible. Knedpox El Abefx Aa Esf

Condition: ready for operation (used), A hydraulic large-format sheet metal shear Schneider is available. Width: 6020mm, bending length: 6000mm, max. sheet thickness at 6000mm: 10mm. With position display. An on-site inspection is possible. Kjdpfsx Elz Rsx Aa Eenf