Used Berlin for sale (2,458)

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. Dwedpfx Aboy D Rk Ie Nob New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 500 h, input voltage: 230 V, input current: 15 A, input frequency: 60 Hz, We are offering this very well-maintained Z Corporation ZPrinter 650 3D printer, manufactured in 2015, for sale. Voltage: 100/115/230 V Current: 15/15/8 A Frequency: 50-60 Hz We are a workshop for people with disabilities and are selling the printer because we no longer have the demand for the products it produces. The printer has been used very little and is therefore in very good condition. Dwodszzk Ufepfx Ab Nob If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2017, condition: used, Number of axes: 5, max. spindle speed: 50,000rpm, spindle taper: HSK E25, working area dimensions: 410x294x210mm, table dimensions: 450x300mm, T-slots: 12mm, spacing: 50mm, max. workpiece weight: 100kg, feed rate: 0-42,000mm/min, tool changer positions: 18 (linear), max. current consumption: 18A, connected load: 10kVA, length: 1995mm, width: 2480mm, height: 2080mm, weight: 3.2t, operating hours: 57,869h, spindle hours: 1,797h, an on-site inspection is possible. Dsdpfezzqc Asx Ab Newb

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Dwedpfxozczvds Ab Njb Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Year of construction: 1967, condition: used, Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. three-jaw and four-jaw chuck diameter according to DIN 6350: 315mm, weight: 3t, with work light, coolant system with chip tray, four-way tool post with face serration for one-hand operation on the compound slide, operating manual and fixed steady rest. An on-site inspection is possible. Dwsdpfozzqblox Ab Njb

Condition: used, Year of construction: 2008, Two Willemin-Macodel W 408 and four Willemin-Macodel W 408S are available, year of manufacture W 408: 1997, 2002, year of manufacture W 408S: 2005, 2006, 2007, 2008, an on-site inspection is possible. Dsdpfx Abezzqbrj Newb

Condition: like new (used), Year of construction: 2023, We currently have three SSI Schäfer Logimat SLL 3625x815 Vertical Lift Modules for sale. All three machines were manufactured in 2023 and are in excellent condition. They have seen very little use and have been serviced annually by the manufacturer since installation. Each machine has a height of 11,550 mm. The height can be adjusted and lowered during installation to fit the building’s ceiling height. Each machine has: 62 trays Tray width: 3,625 mm Tray depth: 815 mm Total storage area: approximately 183.1 m² Maximum tray load: 450 kg Together, the three machines provide approximately 549.3 m² of storage space. The machines are equipped with several optional features: LogiPointer LogiTilt Dedpfxezzwuro Ab Newb LogiBar LogiDriver LogiWork These features help make the picking process faster, easier, and more ergonomic. They also help reduce picking errors and improve the operator’s working position. Please note that these optional features require integration with a WMS or business system. Specifications: Model year: 2023 Model: SSI Schäfer Logimat SLL 3625x815 Machine height: 11,550 mm Machine width: 4,135 mm Machine depth: 3,092 mm Tray width: 3,625 mm Tray depth: 815 mm Number of trays: Approx. 60 / machine Maximum weight per tray: 450 kg Electronics: 3/N/PE 230/400V

Condition: used, Year of construction: 2004, X-axis: 800mm, Y-axis: 400mm, Z-axis: 400mm, max. workpiece weight: 150kg, software: Windows 7, with documentation. An on-site inspection is possible. Dodpfozzqa Uox Ab Newb

Year of construction: 2005, condition: used, Max. locking force: 3500kN, clear tie-bar spacing: 710x710mm, min. mold height: 380mm, max. opening stroke: 1300mm minus mold height, max. ejector stroke: 250mm, max. ejector force: 95kN, ejector retraction force: 48kN, rotary table diameter: 890mm, screw diameter K1: 60mm, K2: 35mm, nozzle radius: 15mm, max. injection pressure K1: 2000bar, K2: 2429bar, max. shot weight (PS) K1: 618g, K2: 142g, hot runner: external, core pull connection: DNP Flatface BG3 (large flat-face sealing), centering mandrel: AS + DS, weight: 16.37t, total operating hours: 74,276h, production hours: 66,341h, the second injection unit and the rotary table have not been used for five years, with documentation and linear handling system, regularly maintained in-house. An on-site inspection is possible, the machine is not connected to power. Dwsdezzqmnepfx Ab Neb

Condition: defective spare-parts repository (used), functionality: not functional, power: 5.2 kW (7.07 HP), gearing type: mechanical, fuel type: gasoline, Year of construction: 1980, We are offering a Honda F800 single-axle vehicle with an attached sweeper attachment. Dwodpfx Abjzw Awqj Nsb Unfortunately, the engine has suffered a piston seizure and can therefore only be used as a source of spare parts.

Year of construction: 2001, condition: used, Five CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Schmoll A-System 1 Twin CNC PCB drilling machine, year of manufacture: 1997. 3) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 4) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 5) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible. Djdpfx Aezzqc Nsb Njwb

Condition: used, Year of construction: 2012, We offer this used OMAG MOD. CONF. DIVA-5 OMAG STICK PACKAGING MACHINE mod. DIVA/5, year of construction 2012. Model: MOD. CONF. DIVA-5 Dwedpfx Absx Rw Hvo Nsb Serial number: 2298 Year of manufacture: 2012 Accident protection guards compliant with with CE norms. Required electric power: three phase 220/380 V, 50 60 Hz. Required compressed air: 6 Atm. Frame in welded steel and painted with epoxy resin paint. Colour code: RAL 9006 (OMAG standard). If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Max. swing over bed: 615mm, max. swing over cross slide: 345mm, distance between centers: 3000mm, spindle bore: 70mm, spindle taper: MT5, forward speed steps: 18, forward speed range: 14-750rpm, reverse speed steps: 9, reverse speed range: 21-857rpm, standard longitudinal feed: 32 steps, 0.1-1.42mm/rev, standard cross feed: 32 steps, 0.03-0.46mm/rev, fine longitudinal feed: 8 steps, 0.048-0.089mm/rev, fine cross feed: 8 steps, 0.015-0.028mm/rev, coarse longitudinal feed: 32 steps, 1.52-2.28mm/rev, coarse cross feed: 32 steps, 0.48-7.2mm/rev, rapid traverse longitudinal: 6m/min, rapid traverse cross: 2m/min, metric threads: 54, range: 1-240mm, Whitworth threads: 37, range: 1-28threads/inch, compound slide travel: 230mm, cross slide travel: 400mm, distance from spindle center to tool holder: 32mm, tool dimensions: 30x30mm, tailstock quill diameter: 100mm, tailstock taper: MT5, quill travel: 205mm, bed width: 490mm, main motor power: 11kW at 1450rpm, rapid traverse motor power: 0.12kW at 1450rpm, coolant motor power: 0.09kW, coolant delivery rate: 25l/min, length: 5500mm, width: 1500mm, height: 1300mm, weight: 4.7t, with documentation. An on-site inspection is possible. Dwjdjzzqbfspfx Ab Nsb

Condition: used, Year of construction: 2008, Number of axes: 3, control: FANUC, connected load: 10kVA, weight: 3.7t, an on-site inspection is possible. Dwjdpfx Abezzqb Ee Nsb

Condition: used, Year of construction: 2007, Controls: EIP, voltage: 230V, connected load: 3kVA, with CE marking. An on-site inspection is possible. Dwjdpfozzqb Sex Ab Nob

Condition: good (used), functionality: fully functional, power: 309 kW (420.12 HP), first registration: 01/2012, fuel type: diesel, overall weight: 18,000 kg, tire size: 315 70 22,5, tire condition: 60.9 %, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, number of beds: 2, Year of construction: 2012, Equipment: ABS, EBS, air conditioning, cruise control, electronic stability program (ESP), fridge, parking heater, power assisted steering, retarder, Inspection possible by telephone appointment only. Vehicle still in use. Fully functional. Sandart SZM Retarder Dwedpfx Abjzzrl So Nob Spoiler 2 beds 1 tank with 950 liters Tires: front 60%, rear 90% Delivery possible WhatsApp available

Condition: used, Year of construction: 1996, A Mikron CNC universal machining center in need of repair is offered. Operating voltage: 400V, frequency: 50Hz, rated current: 40A, control voltage: 24V DC, control: Heidenhain TNC 426, weight: approx. 5800kg. The tool changer is defective and the hydraulic accumulator is empty or defective. The machine has been used in production in single-shift operation with these limitations in recent years. The tools were changed manually, otherwise the machine can be operated. An on-site inspection is possible. Dwedszzqccjpfx Ab Njb

Year of construction: 2021, condition: used, Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage. Dwedpfxszzdyuo Ab Nob

Year of construction: 1995, condition: used, Clamping force: 6500kN, locking force: 7150kN, max. opening stroke: 930mm, mold height: 360-920mm, max. distance between mold mounting platens: 1850mm, mold mounting platens: 1350x1350mm, clear tie-bar spacing: 900x900mm, max. mold weight: 8.6t, max. weight on moving mold mounting platen: 5.7t, screw diameter: 110mm, L/D ratio: 17.2, injection pressure: 1270bar, shot volume: 3570cm³, shot weight (PS): 3180g, max. metering stroke: 375mm, max. nozzle stroke: 850mm, nozzle immersion depth (SVO): 70mm, nozzle contact force: 200kN, installed barrel heating capacity: 52kW, hopper capacity: 110l, the machine screw is defective. With documentation. An on-site inspection is possible. Dsdpozzqcpjfx Ab Njwb

Year of construction: 2004, condition: used, Two Emma flying probe PCB testers are available. 1) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2004. 2) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2002. An on-site inspection is possible. Dsdpfx Ajzzqcvob Nowb

Condition: used, Year of construction: 2013, Technical data: - Manufacturer: Berliner Luft - Year of manufacture: 2013 - Model: RXL 30 - Duct connection: Suction 875x875 mm, Discharge 875x875 mm - Airflow: 30,000 m³/h - Heating medium: Hot water PWW 90/70°C - Heat output Q: max. 344.29 kW - Medium water: 4.24 m³/h Dodexgh I Hspfx Ab Njwb - Connection diameter heating line: 1 inch - Motor power: 15 kW - Location: in stock - Voltage fluctuations: max. +/- 5 % - Without control cabinet Dimensions: - Length: 5,300 mm - Width: 2,000 mm - Height: 1,755 mm

Condition: used, Max. lifting capacity: 2000kg, radius/lifting capacity: 20m/1000kg or 24m/650kg, hook height: 18m, max. hoisting speed: 45m/min, slewing speed: 1rpm, trolley travel speed: 30m/min, rail travel speed: 25m/min, slewing radius: 2.74m, support width: 4m, counterweight ballast: 9800kg, hoisting class: H1, load group: B3. Documentation available. An on-site inspection is possible. Dwedpfxezzqbxe Ab Nsb

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 210 mm, total length: 1,560 mm, total width: 645 mm, overall weight: 60 kg, input current: 16 A, power: 4.5 kW (6.12 HP), New machine 12-month warranty Advantages: + Excellent baking quality at a top price-performance ratio + Robust, durable stainless steel construction + Includes 4-row turning basket for easy turning of Berliners (doughnuts) + Manual thermostat + Easy cleaning and maintenance Optional accessories available at extra cost: - Open immersion basket: + €369 net Technical data: - Capacity: max. approx. 24 pieces (depending on product) - Dimensions: Djdpfxow Ra S Te Ab Njwb --- Footprint: 880 x 645 mm (W x D) --- Overall: 1560 x 645 x 210 mm (W x D x H) - Power rating: 4.5 kW - Electrical specifications: 400 V - 3Ph - 50Hz - 16A CEE plug - Net weight: 60 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, warranty duration: 12 months, total height: 210 mm, total length: 1,174 mm, total width: 645 mm, overall weight: 50 kg, power: 3 kW (4.08 HP), New device 12 months warranty Advantages: + Excellent baking quality at a TOP price-performance ratio + Robust, durable stainless steel construction + Includes 4-row turning basket for easy turning of Berliners Dedpfx Aow Ra R Ajb Nswb + Manual thermostat + Easy cleaning and maintenance Special accessories available at extra cost: - Open immersion basket: + €349 net Technical data: - Capacity: max. approx. 16 Berliners (depending on product) - Dimensions: --- Footprint: 687 x 645 mm (W x D) --- Total: 1174 x 645 x 210 mm (W x D x H) - Power: 3.0 kW - Connection ratings: 230 V - 1Ph - 50Hz - Net weight: 50 kg

Condition: used, Year of construction: 2023, Offered for sale is a self-adhesive labeling machine. Nominal output: 11000bottles/h, reference circle diameter: 720mm, control range: 2000 to 12000bottles/h, number of container plates: 12, pitch: 188.4mm, starwheel diameter: 480mm, starwheel pitch: 8, number of self-adhesive labeling stations: 2, direction of operation: left-hand machine, control: touch panel. Equipped with infeed screw 1x, infeed/outfeed starwheel 1x, bottle plates 1 set, centering hoods 1 set, swivel arm, free-standing control cabinet. Inspection possible by appointment. Dedpfx Aozzdybjb Njwb