Used Bending Machine for sale (83,846)

Condition: new, Cesurbend Mandrel Bending Machine / Pipe Bending Machine PBM-32 Technical Specifications Max. pipe diameter: 32 mm Max. wall thickness (mm): 2 Max. bending angle (°): 190 Pipe bending speed (r/min): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Pipe length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 300 Features • This is a semi-automatic machine. If you need to bend only a few pipes per day (25-50 pieces per day), this machine is the right choice. • It is the simplest pipe bending machine with brake motor. • Brake motor / precise bending • Manual dimension setting Dsdpfxoxt Ra Ee Abbocr • Former rack

Condition: good (used), Year of construction: 2005, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, BYSTRONIC, RB-NTB-2.20x4.00-L-AL Autom. Frame Bending Machine Bystronic / Lenhardt Max. frame dimensions: 2200 x 4000 mm Profiles: aluminum and TGI (the machine is not built for TGI but it works ok.) Dcjdoxyk R Ropfx Abber Inkjet printer Domino A520i and bending tools included. Connection: 3/N/PE-50 Hz, 400V, 6 kW | Year: 2005. In good technical condition. Available: NOW

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Dcjdpfx Aoxpqy Dobbor Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Year of construction: 2008, condition: ready for operation (used), A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible. Dcodpfx Aoxvrv Hobber

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 9200 kg Control Unit Brand AMADA Main Drive Pressing force 200 kN Stroke 1350 mm Dcodpjxxdwuofx Abber Additional Equipment Next to the machine, there are 2 tool cabinets This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine. Application Types Punching

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2100 € 1 1050 mm 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg MINT CONDITION 3 rolls Dcjdpswiquqofx Abber asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, pressing force: 10 t, - Capacity 10 tons - Bending capacity 150 x 8 mm - stroke 200mm - NC touch screen control - Foot control Dcjdpfx Abou Sl U Aeber - Emergency stop - 400V

Year of construction: 2024, condition: new, 1050 mm Dcodpjq Sz Ahjfx Abbsr 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Dcodpjxn Rviefx Abbjr Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: excellent (used), functionality: fully functional, Gade Bending Machine 3100 X 25 Ton Mod. 30/25 Used Machine Dsdewrrhwopfx Abbocr Internal Code: Svr 317

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-Roll Bending Machine / Roll Bending Machine Manufacturer: Haeusler Type: EVO 21015 4-Roll Bending Machine / Roll Bending Machine Origin: Germany / Switzerland Condition: NEW, Display Machine Availability: 12-14 weeks Capacity: Working width 2100 mm Rolling capacity 12 mm Pre-bending capacity 9 mm Standard Equipment: • Variable swing arm adjustment of the side rollers VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touchscreen control panel including high-end BENDtronic® control • Continuously adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electromechanical holding system for the rotation of the upper roller • Automatic pressure adjustment of the lower roller • Automatic pressure compensation of the Bottom roll cylinders: Standard cooling system for ambient temperatures up to 35°C • Automated axis optimization • Automatic hydraulic shutdown for roll positioning • Ultra-compact design to reduce or even eliminate foundation costs • Safety ripcord Optional equipment: • Two-roll drive for the top and bottom rolls • Cone bending device for bending conical workpieces • Advanced cooling system for ambient temperatures up to 45°C • Top support for easier bending of large diameters • Side support for assisting with bending of large diameters Dcedpfx Abexnnf Isbor • Gas pressure accumulator for calibrating previously welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick top roll changes • Interchangeable top rolls with different diameters for bending small-diameter sections • Hardened rolls for bending black and stainless material • Infeed roller conveyor for easy sheet feeding into the machine • Centering device for the infeed roller conveyor, for automatic centering of sheets before bending Not the right machine? As a Haeusler representative, we can customize and offer you the machine you need. Don't hesitate to contact us.

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Bending height:1200 mm Machine data Length:4000 mm Width:2600 mm Height:1400 mm Dodpfjr H Havjx Abbscr Weight:9000 kg

Condition: new, – Capacity: 34 x 3 mm – Digitally adjustable stroke – Emergency stop switch – With 3 tool sets: 33.7 mm, 21.4 mm, 16 mm – Documentation – Weight: 80 kg Dcodsxq Hl Ejpfx Abbjr – 400V

Condition: used, pressure 32 t stroke 250 mm table-size 500 x 760 mm work height max. 925 mm bending speed max. 25 mm/sec tank capacity 80 l Pressure power 320 bar total power requirement 5,5 kW Dedpsgvkigefx Abbocr weight of the machine ca. 0,8 t dimensions of the machine ca. 1,3 x 0,5 x 1,3 m ding height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

Condition: good (used), Technical data: Djdexruvzjpfx Abbscr Working length: 2050 mm Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

Condition: used, functionality: fully functional, BARIOLA PRESS BRAKE 3050 X 100 TON ESA CNC 4 AXES MODEL PBI 100/30NCS DISTANCE BETWEEN FRAMES: 2600 mm STROKE: 150 mm WEIGHT: 7000 KG WITH CROWNING TABLE USED MACHINE Dedpfxjxlr Uho Abbocr INTERNAL CODE: SVR 360

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Dodpexn T Nrsfx Abbjcr Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C Dodpet R Tgiefx Abbecr BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: new, Finger stitching machine with segmented top clamp Including manual back stop PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 2.5 mm Max. working length ----- 1020 mm Dsdpfjga T Ddox Abbscr Max. opening width ----- 48 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 320 KG Width ----- 1350 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Dcsdpfsgvkmrex Abbor Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: new, Year of construction: 2025, Take advantage of our Try&Buy offer and test the TruBend 7050 from 149.900€* incl. TRUMPF tool package incl. 90 days right of return *Offer only valid for new customers in Germany. The images shown correspond to extended equipment options and not the standard scope of the offer. Please contact us for details of the offer and further information. About the machine: With the TruBend Series 7000, you can bend small and medium-sized parts highly productively under the best working conditions. Winner of the Ergonomics Award, it takes the strain off your operator while working quickly and safely. You achieve energy savings of up to 74% compared to conventional hydraulic drives and achieve precise results for all applications. See the perfect interaction between man and machine for yourself! Precise and intuitive Control, tool clamping, positioning and angle measurement - every work step supports the path to the perfect result. User-friendly handling and precise design make the machine a compact high performer in your production. Dsdpfx Aoi Ubhxebbecr Consistently ergonomic If the bender is comfortable, the bending process runs smoothly: the TruBend Series 7000 was the first bending machine to receive an ergonomics certificate. The operator works comfortably with a standing and sitting aid and adjusts the support table individually. The sitting and standing aid as well as the swivel-mounted control protect the spine. LED lighting guarantees optimum visibility in the work area. Further information can be found on our website. TRUMPF quality Our fast remote service support takes care of your concerns anywhere in the world. For further technical data, please refer to the data sheet or visit our website. If you have any questions, please contact us. About TRUMPF: In our 100-year company history, we have been able to help shape many thousands of sheet metal fabrications in Germany alone. We pass this experience on to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market and experts in software, automation and Smart Factory, you will always receive an individual offer that is tailored to your requirements and makes you fit for the future. PS: We are also happy to support you when it comes to financing. With the financing, leasing or pay-per-use models of TRUMPF Financial Services, we are at your side for both financial and business challenges.

Condition: new, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Dsdpfxjga T Dpo Abbecr Including manual back stop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of fingers ----- 38 | 38 | 50 | 50 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 mm Max. angle of attack ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, Upper and lower blade removable in segments Including manual back stop PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 46 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. angle of attack ----- 0 - 135 Dcjdpfx Asga T A Iobbsr Weight ----- 380 KG Width ----- 1600 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, upper and lower blade removable in segments PNEUMATIC CYLINDER !!! Including manual back stop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of fingers ----- 38 | 38 | 50 | 50 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 mm Max. zethoek ----- 0 - 135 Dsdpfsga T Dasx Abbjcr Weight ----- 590 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, Finger stitching machine with segmented top clamp Dcjdpfx Aboga T Dhjbsr Including manual back stop PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 45 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 360 KG Width ----- 1620 mm Depth ----- 850 mm Height ----- 1175 mm