Used Bench Drilling Machine for sale (66,063)

Condition: new, Main Motor Power: 5.5 KW, 380 V Operating Type: Hydraulic Operating Type: Geared Coolant Pump Power: 90 W Drilling Capacity: 63 mm Spindle Taper: MK5 Spindle Stroke (Spindle Travel): 400 mm Spindle-Column Distance: 450-2050 mm Spindle-Table Distance: 400-1600 mm Column Diameter: 450 mm Speed: 20-1600 rpm Number of Steps: 16 Table Size: 950x630x500 mm Spindle Feed: 0.04-3.2 mm/rev (16 steps) Machine Size: 2900x1250x2500 mm Dimensions (L x W x H): 3110x1250x3150 mm Rodpfjy T H S Hsx Ad Rocb Net Weight: 6800 kg Gross Weight: 7150 kg

Condition: new, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Thrust: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm X travel: 380 mm Rodpfx Aswhd Afed Recb Y travel: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread tightening spindle - Thread cutting device - Rotatable table - Height-adjustable protective cover - Spindle guard with limit switch

Condition: new, Technical Specifications: Tool Holder: MT 3 Drilling Capacity: 25 mm Drilling Depth: 120 mm Throat: 250 mm Speed Range, Continuous: 0 - 2000 rpm Table Size: 470 x 420 mm Rjdjvnrgajpfx Ad Rscb Column Diameter: 100 mm Motor Power: 0.75 kW Weight, Approx.: 200 kg Dimensions (W x D x H), Approx.: 630 x 850 x 1760 mm Features: - Continuous speed adjustment with digital display - Height-adjustable spindle guard with micro limit switch - Base plate with T-slots - Emergency Stop Push Button - Star Grip - CE

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light Rjdjpxmlijpfx Ad Rjcb - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: used, Column Drilling Machine INFRATIREA - ORADEA Type PH - 031 Serial No. Year of manufacture 1975 Drilling capacity 40 mm Spindle taper MK 4 - short quill Rsdpfx Adstrpifj Rscb Throat depth 320 mm Quill stroke 250 mm Table size 400 x 400 mm Column diameter 160 mm Spindle speed 85 - 1500 rpm, 6-speed gearbox Motor power 2.2 kW Power supply 400 Volt, 50 Hz - Spindle speed adjustable over 6 gear steps - Right and left-hand rotation - Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/rev - Swivel drill table - Table height adjustment via hand crank - Clamping surface on machine base - Coolant pump integrated in base Required space L x W x H 1000 x 600 x 2450 mm Weight 700 kg

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Rjdeqa Txqjpfx Ad Recb Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Radial drilling machine WEBO Type R4bR Rsdou T Ty Hepfx Ad Rjcb Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite Rjdpfsnzt A Hjx Ad Rscb - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Rcjdsfbt Huopfx Ad Rob Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable Rcodpfx Aehmmfkjd Rjb - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Year of construction: 2007, condition: excellent (used), functionality: fully functional, IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS: 1250 mm CROSS AXIS (MILLING QUILL): 380 mm CROSS TRAVEL OF HEAD: 500 mm VERTICAL TRAVEL: 1000 mm ROTARY TABLE SIZE: 1000x800 mm Rjdjyft Haepfx Ad Rscb TOTAL MACHINE WEIGHT: 20,000 kg

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 32.0 mm 35.0 mm bore stroke 150 mm M 22 (St 60) throat 300 mm 0.1 - 0.2 mm/U MK 4 480 x 480 mm 80.0 - 1.170 U/min 0.90 / 1.35 kW 340 kg 800 x 1000 x 2000 mm Manufacturer's list price: 8.665 EURO Special price on request Equipment: - Column drilling machine - "V-belt drive" - infinitely variable speed adjustment - Manual automatic spindle feed - Thread cutting device * automatic feed reversal RS for thread cutting - pole-changing drive motor - depth scale and adjustable depth stop - Height-adjustable work table * Adjustment with hand crank - Right/left rotation of the drill spindle - Machined machine base incl. coolant device - Machine/work light - Folding drill spindle guard - Emergency stop button at the front Rcedex Dngkopfx Ad Reb - CE marking + instruction manual

Condition: used, Year of construction: 2006, Radial drilling machine Manufacturer: Valmer Type: TR 80/2500 SP Year of manufacture: 2006 Rcodpjw Dbgyjfx Ad Rsb Table dimensions: 1,000 x 800 x 560 mm Maximum drilling diameter: 80 mm Maximum threading diameter: 42 mm Distance between spindle axis and column, maximum: 2,500 mm Distance between spindle axis and column, minimum: 500 mm Head movement, horizontal: 2,000 mm Distance between spindle nose and work surface, maximum: 2,000 mm Distance between spindle nose and work surface, minimum: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg 19526

Condition: new, Continuous drilling capacity in E 335: 18 mm Normal drilling capacity: 20 mm Tapping capacity: M 12 Spindle: MK 2 Drilling depth: 100 mm throat depth: 225 mm Speed range A: 100 - 2,000 min-1 Speed range B: 200 - 4,000 min-1 Spindle/table distance: 60 to 440 mm Rodocw H Syepfx Ad Rocb Table surface: 345 x 372 mm Column diameter: 90 mm Total height: 955 mm Weight: 110 kg Frequency-controlled three-phase motor: 1.5 kW Powerful, precise universal drill with a wide range of applications. Table/height adjustment via gear rack and worm gear. Three-phase motor, reversing switch right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with height adjustment from the front. Mains connection 230 V.

Condition: good (used), Year of construction: 1998, functionality: fully functional, DONAU DANUMERIC 440, year of manufacture 1998 Rodpfx Asy Txlrjd Rocb Technical specifications: - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm - Spindle taper SK40 - Speed range 15 – 2800 rpm - Motor power 5.5 kW - Weight approx. 2,800 kg

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 Rcodey Nd T Hopfx Ad Rsb constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: good (used), Year of construction: 1992, machine/vehicle number: 063592, Offer 26067 Technical data: - Working range: 1.5 - 60 mm - Adjustable spindle angle: 40° - 180° - Motorized spindle adjustment - 6-jaw chuck - Coolant system - Lighting - Drive, grinding head: 400 V / 0.38 kW - Drive, electric spindle: 400 V / 0.18 kW - Space requirement: approx. W 750 x H 1200 x D 750 mm - Weight: approx. 100 kg Rjdpfx Aey U U N Nsd Rocb

Condition: used, Year of construction: 1981, machine/vehicle number: 800 02 81 46, type of input current: three-phase, Specialized EDM drill (eroding machine / hole starter EDM machine) Rcedpfsy Su Iysx Ad Rsb This machine is primarily used in metalworking as a hole starting EDM machine or for spark eroding the removal of broken tools (such as taps, drills, or reamers) from valuable workpieces. This is done with extreme precision without damaging the surrounding thread or material.

Condition: good (used), Year of construction: 1978, machine/vehicle number: 973, Offer 26099 Technical data: - Drilling capacity in steel ST 60: 32 mm - Drilling capacity for step drilling: 40 mm - Thread cutting device - Drill spindle mount: MK 3 - Drill spindle stroke: 200 mm - Outreach min / max: 250 / 1000 mm - Stroke of the arm: 600 mm Rcsdey U Htaspfx Ad Rob - Min. / max. distance: - Spindle - base plate approx.: 650 - 1250 mm - Processed base plate clamping surface: B 1150 - 700 mm - 12 spindle speeds: 56 - 1220 rpm - 4 feed rates: 0.15 - 0.30 mm/rev - Drill spindle drive: 400 V / 3.5 kW - Square table - Space requirement approx.: W 1700 x H 1960 + 500 x D 700 mm - Weight approx.: 1200 kg

Condition: used, Year of construction: 2000, Boring machine Manufacturer: TOS Type: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Report available Travel distances: X/Y/Z: 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping surface: 1,800 x 1,600 mm Table load: 12 tons Number of tool positions: 60 Spindle connection: SK 50 Spindle diameter: 130 mm Redpfxsx A Ayis Ad Rscb Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic guard completely overhauled with a new wiper. Dimensions: L x W x H approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons 19526ä

Condition: good (used), Year of construction: 2001, functionality: fully functional, Equipment: CE marking, Through-feed drilling machine, CNC controlled, with drilling heads on the right, left, 4 above, and 7 below. Rcedpfx Asy U H R Eod Rsb

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Rcjdsy D Hr Ujpfx Ad Rob Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Rcjdpfjxwaz Hex Ad Rjb

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. Rcjdpfx Adexnlfls Reb - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: new, Year of construction: 2026, Standard equipment: Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob EMERGENCY STOP button Thermal overload protection Spindle stop Drill protection with electric. Protection Connection cable with Schuko plug 3-year guarantee for single-shift operationContinuous/normal drilling performance (mm) 6/8 (in E335/ST60) Thread cutting performance (depending on pitch) M5 Spindle B12 drilling depth (mm) 60 Thrust (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), distance (mm), width dimension (mm) Cross grooves, number 2, 14/26 Rcjdpfx Ajvupt Djd Rob Drill head height adjustment by hand Feed (mm/revolution) by hand Drill depth stop stop ring (positive locking) Drill depth display digital Speed display digital Motor three-phase - frequency-controlled, mains connection 230 V (kW) 0.54 Spindle speeds continuously variable (1/min) 100 – 10000 Spindle/work surface (mm) 140 – 315 Machine dimensions with packaging (mm) 452 x 700 x 1,130 Machine dimensions without packaging (mm) 320 x 520 x 820 Weight (kg) 44 Optional accessories: Precision keyless chuck for Turbo Dril (0.5-6 mm), B 12: €160 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!