Used Belt Press Machine for sale (72,651)

Condition: excellent (used), Hettich hinge boring machine, 380V power supply, vertical and horizontal drilling, 3 drilling heads, rotatable heads, parallel (row of holes) or perpendicular positioning, pneumatic feed of drilling head. The condition of the drill is very good. Nwodpfxeyt Icle Akion

Condition: excellent (used), Belt grinding machine HOLZKRAFT LBSM 2505 - used - Grinding belt cover, Right-/left-hand rotation, Swiveling grinding unit ----- Technical data ----- Table size: 2,400 x 800 mm, Throat depth: 650 mm, Motor: 3 kW, Grinding belt dimensions (LxW): 150 x 6,400 mm Nwjdpfsyfwcrsx Akien Quality information: - Belt tracking checked - Grinding shoe checked - Height adjustment checked - Grinding table guide checked - Complete basic cleaning performed - Electrical system checked - Immediately ready for operation

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 CE type tested GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Electric adjustment Upper belt cover Nsdpfx Aeyvvr Iokijwn Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Year of construction: 2026, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Njdpfx Ajv Sq Nbjkiswn Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Dimensions: Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Weight: 297 kg Optional: automatic juice draining

Condition: used, Used machine Used Hettich Blue Max drilling and countersinking machine Motor power: 0.8 kW Motor speed: 2800 rpm Nwsdpfx Aow I Um Tekijn 4 drilling spindles with longitudinal stops one foot switch Punch die is missing!! Availability: by arrangement Location: Solingen

Condition: excellent (used), Year of construction: 1970, machine/vehicle number: T171 074 N, WITH HOT FOIL STAMPING DEVICE Format: A4 Number of Colors: 1 Nwedpfx Ajw Rcrpokien

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press Nsdpez Afhpofx Akijwn for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: used, This pellet press is being auctioned off in our industrial auction / machine auction, which includes surplus inventory, clearance sales, and individual/exhibition pieces, online. Nwsdps Abaqmsfx Akion You can find this and many other items on our platform.

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A Njdpfx Aksv Sq S Noiown • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding belt width: 100 mm, grinding belt length: 950 mm, Equipment: CE marking, A used, well-maintained DelNegro belt sanding machine, type: ISS 75/100. The machine is suitable for belt widths of 75 or 100 mm. Sanding can be performed horizontally or vertically. 19 belts, size 100x950, grit 80, are included in the scope of supply. Nwsdpjywarhjfx Akien Two belt speeds, dust extraction system. Technical data and dimensions: Subject to change.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Belt Grinder for Pipe and Profile Ends Demonstration machine, as new Year of manufacture: 2008 Robust belt grinding machine for pipe and profile ends on a stable base frame with a large drive motor for professional metal processing. Description – ideally suited for finishing pipes and profiles – for diameters from 20 to 76 mm – grinding angles from 30° to 90° – high belt speed of 30 m/sec – powerful motors – vibration-free operation for optimal results Technical Data Motor power: 3 kW Grinding range: Ø 20–76 mm Belt dimensions: 100 x 2000 mm Guide piece adjustable from 30° to 90° Speed: 2905 rpm Belt speed: 30 m/sec Dimensions: 1300 x 640 x 440 mm Nwsdpfx Ajydpkxskion Weight: 168 kg Accessories (optional) Roller set (radius rollers) for pipe and profile end grinder, ø 20 – 26 – 32 – 42 – 48 – 60 – 76 mm

Condition: used, JOHANNSEN Type T 85 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Technical data: - Table size: 2,800 x 950 Njdpfozryx Usx Akiown - Motor: 5.5 kW - Belt width: 150 mm

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts Nsdey Erxvepfx Akiown special price on request Equipment : - High quality construction - Drive roller is crowned - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Nwedpfx Asxpqy Dokisn Good condition

Condition: excellent (used), Year of construction: 2013, Ref:11118 . 2013 Schmedt Präleg & Präform Casing-in & Pressing Machines. For casing-in a variety of thin to thick books into flexible or hard cases. Special features:- • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks Working in conjunction with:- 2008 Schmedt Präform 2100 Pressing & Joint Forming Machine. For pressing a variety of thin to thick hard cover books immediately after casing-in. Nodpfx Akozkgdzoiewn Suitable for single or assorted books, pressing & burning in the joint in a single operation. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Specification, PraForm 2100 Book press with groove cutter. Maximum format: 420 x 520 x 100 mm Power supply: 230 V + compressed air.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, pressing force: 120 t, ram plate length: 4,300 mm, Equipment: CE marking, SAFAN 120-ton, 4300mm CNC Edge Press/Folding Machine Used bending machine / press / edge press Brand: SAFAN Model: [Model number missing in the original text] Year: 2002 Press force: 120 tons Bending length: 4300mm CNC control with touchscreen Front supports Operating manual Nwodpfx Akjz It Sqsisn Electrical and hydraulic diagrams Rear safety gate Side safety gates

Condition: used, Year of construction: 2022, Unwinding machine with centering belts, Nanmak DS 760 Year of manufacture: 2022 Condition: Test machine Infeed/outfeed belt speed adjustable separately Roller speed adjustable Nwedpsz A R Tnsfx Akien Roller gap adjustable Belt width 76 cm Working length 172 cm Length per belt 81 cm Belt height from the ground: 108 cm Centering belt also available as a 3-row version Flour spreader External dimensions (L x W x H): 172 x 110 x 150 cm

Condition: used, Webomatic CL-C 950 chamber belt vacuum packaging machine – condition: as new The CL-C 950 is the entry-level model within the WEBOMATIC CleanDesign range and enables fully automatic bag packing with very little manual work. The patented Roll-Back-Lid allows the inside of the lid to be cleaned quickly and thoroughly without exposing the conveyor belt to cleaning fluids. Key features - Chamber of 1,050 × 850 × 285 mm (l × w × h), suitable for large pouches - 950 mm seal bar across the full width - Conveyor belt for automatic product feed-through - Patented Roll-Back-Lid for fast and thorough cleaning - Mitsubishi PLC with colour touchscreen - WEBOMATIC CleanDesign construction Applications - Meat and meat products - Fish and seafood - Cheese and dairy - Ready meals - Medium to large batch production Njdjz Hqxxspfx Akiown Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Chamber belt vacuum packaging machine Condition: As new Chamber size (l x w x h): 1,050 x 850 x 285 mm Seal bar length: 950 mm Control: Mitsubishi PLC with colour touchscreen Lid: Roll-Back-Lid (patented by Webomatic) Design: WEBOMATIC CleanDesign Application: Fully automatic packaging of products in pouches

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 8398, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 2,500 mm, actuation type: mechanical, total height: 2,200 mm, total length: 3,800 mm, total width: 2,000 mm, Equipment: CE marking, documentation/manual, Löser external cylindrical grinding machine for grinding the outer circumference of pipes 1.3. Technical data Dimensions: Width approx. 3.8 m | Height approx. 2.2 m | Depth approx. 2.0 m Power supply Electrical connection: 3 x 400 V AC | 50 Hz Total power: 15 kW Fuse: 32 A Pneumatic connection Main supply: 6 bar | approx. 5 m3/h Supply for air nozzles: 6 bar | approx. 30 m3/h Workpieces that can be processed Pipes made of steel or stainless steel with the following dimensions: Length: from 10 mm to 100 mm Diameter: from 50 mm to 1000 mm Grinding station type L Number of grinding stations: 1 Grinding mode: Wet machining Grinding technology: Grinding with a grinding belt and contact wheel | Grinding with a grinding wheel Cutting speed: continuously adjustable | max. 30 m/s Power: 7.5 kW per station Current consumption: maximum 14 amps per station Dimensions of grinding belt: Width 150 mm | Length 2,500 mm Njdpfx Akezvn Urjiewn Dimensions of contact wheel: Width 150 mm | Diameter 400 mm Dimensions of grinding wheel: Width 150 mm | Diameter 400 mm Belt tension: Pneumatic | manually adjustable Station positioning: Manual Workpiece transport Workpiece support: V-groove | Angle 120° Height adjustment of V-groove: Manual Feed devices: 1 Positioning of feed device: Manual Feed speed: approx. 1 m/min to 10 m/min; depending on the workpiece diameter Coolant management The machine is prepared for wet machining. A Stevens paper band filter, type PF 120, machine no. 322177, is included in the scope of supply.

Condition: refurbished (used), Year of construction: 1990, machine/vehicle number: 77168, functionality: fully functional, pressing force: 63 t, stroke length: 165 mm, table width: 650 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,650 mm, total height: 2,220 mm, overall weight: 3,800 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hubtischstanzmaschine (Hydraulic table punching machine) - Punching force 630 kN - Table dimensions 1600 x 650 mm - Activation via push button or single-stroke safety curtain - Oil filter new, hydraulics inspected, piston seals new - Electrical system completely repaired and partially renewed - Mechanics completely overhauled - Condition like new, new paint RAL 6011 green - Incl. punching plate P1/78NE, 10 mm thick Nodpfxsz Rmyhj Akiswn - Without hydraulic oil Price on request

Condition: excellent (used), Year of construction: 1955, machine/vehicle number: 104 678 N, Format: A4 Nsdsw Rb U Nepfx Akiewn Number of Colors: 1

Condition: used, Csepel RF50/1250 Radial Drilling Machine Robust and reliable radial drilling machine from the reputable manufacturer "Csepel", model RF50/1250. The machine is characterized by its robust construction and is ideal for workshops, metalworking shops, or demanding DIY enthusiasts. Technical data (according to the nameplate): Manufacturer: Csepel (Budapest) Type: RF50 / 1250 Power supply: 3~ (Three-phase / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Nwsdpfozninwjx Akion Required fuse rating: 16 A, slow-blow   You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Nodpoxtxhkefx Akiown Available immediately.

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container Nwsdpfx Akju R Sxxsien - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 1998, Belt sanding unit for machining workpiece side surfaces with pneumatic belt tensioner. Njdpfsxqqczex Akijwn Technical data: Belt sanding unit: - Tilting device from -1° to +15° - Belt size 2500 x 100 mm - Cutting speed 18/36 m/s - Motor 3.7/4.4 kW - Two-roller device for free-belt sanding. Roller diameter 75 mm, adjustable center distance from 225 - 320 mm - Swiveling horizontal slide, stroke 130 / 220 mm, operated via handwheel - Fixed mounting for sanding unit - Feed device, pneumatically controlled, stroke 5 - 20 mm Table unit: - Linear workpiece carrier table with automatic feed, travel 700 mm, clamping surface 300 x 250 mm, working speed from 15 - 150 mm/s, working travel freely programmable by the automation - Cable carrier track for cable management and pneumatic hoses - Clamping of workpieces by spring, release by pneumatic cylinder