Used Barth Hubtisch 300 for sale (24)

Condition: new, Year of construction: 2026, Max. lifting capacity: 330 kg Multiplex board, 1245 x 740 mm Height adjustment: 475 to 1070 mm Kdjdpfxebygv Ne Aldet

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Kdedjhui D Eepfx Aldjt Volume: 100.000 Liters Diameter: ca. 2.900 mm Length: ca. 15.750 mm Weight: ca. 18.800 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: new, Year of construction: 2026, Max. lifting capacity 400 kg Kdsdpfx Ajyrc Dusldot Worktop: birch multiplex Worktop size: 1245 x 740 x 24 mm with recessed grips Height adjustment: 480 - 1070 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, Dry hay, biomass, or a drying container with a user-defined air volume, instead of running a fan at full speed and incurring the associated costs. This Karl Barth AG Ventomat SE-1-100-4p was purchased in December 2025 and used for approximately four months. It operates perfectly and is offered as a complete, ready-to-use system, including more than just the fan: a factory-configured 5.5 kW Invertek Optidrive E3 frequency inverter with disconnect switch, duct cone and reducer, plus a free 10m Ø400mm fabric hose. Original purchase price approximately CHF 8,507. Only one unit available – sold as a complete set with the inverter, ducting accessories, and hose. Once sold, it's gone. Best for: hay drying, biomass drying, drying containers, and agricultural ventilation where controlling air volume is preferred over continuous full-speed operation. Not suitable for: corrosive or heavily dust-laden air streams, or ATEX zones unless independently verified. What the specifications mean in practice: Kodpfx Alszrzizedsdt • 5.5 kW motor, 4 kW rated fan output – sized for continuous hay/biomass drying, not short bursts. • Factory-configured Invertek Optidrive E3 inverter – adjusts air volume to the crop and its moisture content, reducing energy consumption. • Inverter in IP66/NEMA4X enclosure with disconnect switch – can be mounted in a dusty barn without a separate control cabinet. • Duct cone 222/563 to D400mm and D750/D600mm reducer – connects to existing ductwork without requiring custom fabrication. • 10m Ø400mm flexible fabric hose included – allows flexible positioning of the fan and ducting to where needed. • Painted sheet metal, single-suction Swiss-made (Karl Barth AG) – durable and locally supported. Complete package includes: Ventomat fan, Invertek Optidrive E3 5.5kW inverter with disconnect switch, duct cone 222/563 to D400, duct reducer D750/D600 with flange ring, and a 10m Ø400mm fabric hose – all at no extra charge. Purchasing and configuring the inverter alone represents a significant additional cost. Technical data: – Manufacturer: Karl Barth AG, Dättlikon (CH) – Type: Ventomat SE-1-100-4p – Rated output: 4kW – Motor: 5.5kW, 4-pole – Construction: Painted sheet metal, single-suction – Inverter: Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X – Inverter input: 380-480V, 3-phase, 17.2A – Inverter output: 0-480V, 3-phase, 14.0A, 7.5HP – Duct connection: 222/563mm to D400mm, plus D750/D600mm reducer Condition: Barely used (~4 months), technically flawless, fully functional. New price (Dec 2025) CHF 8,507.45 including VAT. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: purchased in Dec 2025, used ~4 months for hay drying/drying container, technically flawless. The inverter can be demonstrated in operation under load; nameplate photos and a running video are available. In-person inspection in Kerns OW by appointment. Why buy now: near-new, factory-configured Swiss unit sold as a complete set – the fan, inverter, cone, reducer, and hose remain together. Once sold, this configuration will not be available at this price again. First-buyer bonus: free functional test with the inverter under load, plus loading assistance, at no extra cost. Valid until September 9, 2026, or until sold. Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 20,000 liters Kdedpfx Aovm Uttsldjt Diameter: 2,000 mm Length: approx. 6,860 mm Weight: approx. 3,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit switch, and complete tank fittings consisting of: - Filling pipe 3" with TW coupling - Level gauge pipe 1" with level gauge rod - Suction combination with suction line (1 1/2" or 2") - 1 vent stub 2" with vent cap The tank is factory-equipped with the above-mentioned fittings and is internally cleaned. Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg The tank can be painted in your desired RAL color, and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. Kdodpfx Aleguzhcedet If you require any further information, please call us or send us an email. We also offer trade-in and purchase of tanks/containers; please contact us for more information. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit value sensor, and complete tank fittings consisting of: - 3" filling pipe with TW coupling - 1" sounding pipe with sounding rod - Euroflex 3 suction combination (max. 150 l/h) - 1 2" vent with vent cap. The tank is factory-equipped with the above-mentioned fittings and is internally cleaned. Capacity: 50,000 liters Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be repainted in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. If you require any further information, please call us or send us an email. Kjdpohvmitsfx Aldjdt Trade-in and purchase of tanks/containers are possible, please contact us for this. Delivery time by arrangement! We also have these types of tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Fire water tank according to DIN 14230 (underground fire water tank): 100,000 liter fire water tank for underground storage, single- or double-walled, 1 manhole DN 600 with a blank cover including gasket and screws, externally with bitumen insulation - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 The tank has a fire water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in form B without a gauging port. Kdjdpfx Alji Enwvedot Furthermore, the tank has a ventilation flange with a cap in nominal width/DN 100 with a total length of approx. 1,300 mm, suitable for 800 mm of soil cover and 500 mm above ground. - The tank is emptied, cleaned and has been given a bitumen outer coating in our factory. Upon request, we can equip the tank with an internal full coating based on bitumen (for corrosion protection) or an epoxy resin internal coating. We would be happy to offer you a cost-effective delivery with our own truck. Simply let us know the delivery address, and you will promptly receive the exact freight costs. An inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can also accept trade-ins and purchase tanks/containers; simply contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 120,000 liters

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 30,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 30,000 liters / 30 m³ Length: approx. 9,940 mm Diameter: approx. 2,000 mm Kedpfevmz Hasx Aldodt Weight approx. 5,000 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure Kjdpjvm Urvefx Aldodt - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 16,000 liters Diameter: 2,000 mm Length: approx. 5,475 mm Weight: approx. 2,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. Kodpfx Aevm Uvneldjdt The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 30,000 liters Diameter: 2,000 mm Length: approx. 9,9400 mm Weight: approx. 5,200 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, gasket and screws. Available new or used, immediately! The container has been emptied, cleaned, completely overhauled and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in form B, without a level gauge connection - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm of ground cover and 500 mm above ground Kdsdshh Spropfx Aldet - Externally coated with bitumen for protection - If required, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will immediately receive the exact freight costs. Inspection is possible at any time by prior appointment. We can also offer trade-in and purchase of tanks/containers of all types. Please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit value sensor, and complete tank fittings consisting of: - Filling pipe 3" with TW closure - Gauge pipe 1" with gauge rod - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent connection 2" with vent cap. The tank is factory-equipped with the above-mentioned fittings and is cleaned internally. Capacity: 80,000 liters Kjdpfxjhvidgo Aldsdt Diameter: 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg The tank can be repainted in your desired RAL color, and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will promptly receive the exact freight costs. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 100,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst Tel: 07251 / 915119 Fax: 07251 / 915175

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Ksdevmz Idopfx Aldsdt Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Kdjdpfxei Enxdj Aldjt In addition, we can equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detectors - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request - External tank insulation with PU foam The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 20,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 20,000 liters / 20 m³ Length: approx. 6,840 mm Diameter: approx. 2,000 mm Weight approx. 3,500 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory Kdodpfx Alovmz D Ejdjt If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. Of course, we always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Kdodpfsvm Uuwjx Aldot Contents: 25,000 liters Diameter: 2,000 mm Length: approx. 8,400 mm Weight: approx. 3,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 60,000 liters Diameter: 2,500 mm Length: approx. 12,650 mm Weight: approx. 9,950 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time by arrangement! Kdjdpfxovm Uxij Aldet Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: used, functionality: fully functional, tank capacity: 30,000 l, total height: 7,200 mm, inner diameter: 2,500 mm, outer diameter: 2,900 mm, overall weight: 6,000 kg, wall thickness: 10 mm, wall structure: single-walled, number of chambers: 1, manhole diameter: 600 mm, pressure (max.): 3 bar, Buffer Storage Tank – 30,000 L, Vertical, Insulated Volume: 30,000 liters Internal diameter: approx. 2,500 mm External diameter (with insulation): approx. 2,900 mm Cylindrical height: approx. 5,520 mm Overall height: approx. 7,200 mm Empty weight: 6,000 kg Operating pressure: +3.00 bar Operating temperature: -10 / +900 °C Medium: Water Density: 1,000 kg/m³ Bottom wall thickness: approx. 11 mm Shell/cylinder wall thickness: approx. 10 mm Material / Characteristics Shell material: P265GH / S235JR Insulation: 200 mm mineral wool Cladding: smooth aluminium sheet (weatherproof) Mineral wool will be newly installed, i.e., insulation thickness can be chosen freely. Equipment Mounting: Feet Number: 4 Attachment: fixed Top/base type: dished end (Klöpper head) Bottom/base type: dished end (Klöpper head) Connections: - 1 manhole DN 600 with blind cover - 7x 1/2'' sockets for temperature sensors - 2 lifting lugs on the shell - 2 lifting lugs on the top head - 2 lifting lugs at the tank feet - 1 drain 2'' at the tank bottom, routed to the outside and terminating in a 2'' ball valve Kjdpfx Alexdknkjdedt - 1 vent Ø33.7 x 3.6 mm, routed downwards laterally within the insulation and ending in the manhole cover enclosure - 1 connection DN 125, flanged externally, ending internally in a 90° bend in the tank center - 1 connection DN 125, flanged externally, ending internally in a 90° bend in the tank center Documentation: Drawing

Condition: refurbished (used), Fire water tank according to DIN 14230 (underground fire water tank): 100,000-liter fire water tank for underground storage, single-walled, 1 manhole DN 600 with blind cover including gasket and screws, with bitumen insulation on the outside - used - Tank volume: 120,000 liters / 120 m³ Length: approx. 16,500 mm Kedpfxsfn Rdds Aldodt Diameter: approx. 3,100 mm Weight approx. 3,100 kg Material: Steel material S 235 JRG 2 The tank has a fire water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in form B, without a dipstick. Furthermore, the tank has a ventilation flange with a cap, in NW/DN 100, with a total length of approx. 1,300 mm, suitable for 800 mm of earth cover and 500 mm above ground. - The tank has been emptied, cleaned, and factory-coated with a bitumen exterior finish. Upon request, we can equip the tank with an internal full coating based on bitumen (for corrosion protection) or an epoxy resin internal coating. We would be happy to offer you a cost-effective delivery with our own truck. Simply let us know the delivery address, and you will promptly receive the exact freight costs. An inspection is possible at any time after prior arrangement. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can also offer trade-in and purchase options for tanks/containers; please feel free to contact us. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000 liters.

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit switch, and complete tank fitting consisting of: - Filling pipe 3" with TW closure - Gauge pipe 1" with gauge rod - Euroflex 3 suction combination (max. 150 l/h) - 1 ventilation nozzle 2" with ventilation cap. The tank is factory-equipped with the aforementioned fittings and is internally cleaned. Capacity: 50,000 liters Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be provided with a new paint finish in your desired RAL color and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery location, and you will promptly receive the exact freight costs. If you require further information, simply call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Kjdpfxehvmiws Aldjdt Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 40,000 liters Diameter: 2,500 mm Length: approx. 8,700 mm Weight: approx. 7,200 kg Kdodpfxsvm Uwxj Aldot The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: new, Year of construction: 2026, functionality: fully functional, Max. lifting capacity 400 kg Height adjustment 500 - 1150 mm Perforated plate, coated, 2000 x 1015 x 30 mm Price without accessories (support rails, rack and pinion, counter-bearings, etc.) Kdjdpfx Aloyrdcxjdst

Year of construction: 1950, condition: ready for operation (used), functionality: fully functional, Coffee Roaster GW Barth Sirocco 200 for sale in Poland Convection ball roaster suitable for coffee, cocoa, or nuts. From 1900, GW Barth Ludwigsburg & Co GmbH (now Bühler Group) was one of the world’s leading manufacturers of roasting machines, especially for chocolate manufacturers, where many Siroccos are still in production today. Indeed, mostly made of cast iron, these robustly built machines are durable and can be considered efficient production tools when updated with recent technologies, as is the case with the one we are selling. Whether you are roasting coffee or cocoa, the forced hot air system combined with the ball drum of the Sirocco will guarantee the most homogeneous results and allow you to avoid the most common roasting defects that you might encounter when the flame hits the drum. Technical details: Capacity of 100-120 kg per batch, depending on the density of the product. Roasting time: 15-20 minutes. Voltage: 3x400VAC. Estimated year of manufacture: circa 1950. Condition: fully regenerated and refurbished, in perfect working condition, ready to install and operate. Including: Coffee roaster with cooling tray. Cyclone for exhaust air. Electric cabinet with Siemens PLC. Kdjdpfjy Ua Hysx Aldet The video shown displays the exact machine we are offering; the video was recorded during the initial trial roasting after refurbishment.