Used Band Saw Machine for sale (67,083)

Condition: used, Year of construction: 2015, power: 3.7 kW (5.03 HP), overall weight: 1,500 kg, capacity: 250 mm at 90 degrees Gjdpfx Ageznk Ufe Teka capacity: 300 mm at 45 degrees cutting speed: 90 meters per minute blade: 3505 x 34 mm weight: 1500 kg

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Gkjdpfx Ageznh Nms Tsa Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Gedpfx Aowp Ipxeg Toka

Condition: used, Storage location: Sonnefeld Gkedsway Dcopfx Ag Tsa

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Gedsvvkd Tspfx Ag Tska Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Gjdpjvvkfdsfx Ag Tjka

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Godpovvkfqjfx Ag Toka

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Gkjdpfx Aevvkfweg Tsa Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Gjdpfsxyiilox Ag Teka Storage location: Nattheim

Condition: used, Motor 4.0 kW Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction port diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 650 kg Stock location: Nattheim Gkedjwayzbjpfx Ag Tsa

Condition: used, Year of construction: 1994, Wheel diameter: 500 mm with motor brake. Maximum cutting height: 320 mm. Column side left, top and bottom, APPA guides. Motor: 1.5 kW. Table tiltable. Mobility device with steering wheels and blade tension indicator. Blade length: min. 4040 mm, max. 4140 mm. Location: Nattheim. Gjdpewl D S Uofx Ag Tjka

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Gkodpfx Aoymcrbjg Tsa Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2026, Optimum 275 N demonstration machine Model: Opti S 275 N Technical data: Cutting range 0 degrees, round: diameter 225 mm Cutting range 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees, round: diameter 160 mm Cutting range 45 degrees: 160 x 160 mm / rectangle Cutting range 60 degrees, round: diameter 100 mm Cutting range 60 degrees: 100 x 100 mm / rectangle Saw bow lifting: manual Feed: steplessly adjustable Gkedpfx Ageztcyde Tja Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION Gsdpfeztpw Nsx Ag Tska BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: repair required (used), Year of construction: 1981, machine/vehicle number: 7284, functionality: unexamined, Twin band saw CANALI ML1100, available immediately from stock. Very reasonably priced, dismantled and ready for loading. Godpfx Aszt Ixxeg Tska

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm table - swivable +/- 20 ° table surface area 600 x 600 mm Gksdpfx Aoxcp Sfsg Tea table - tiltable +/- 45 ° total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t Gkodpfxsylp A De Ag Toa dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Gedpjzpb Eqsfx Ag Tska

Condition: good (used), Year of construction: 1998, machine/vehicle number: 6023, Offer 18184 Technical data: - Saw blade diameter up to approx. 400 mm - Saw blade speed 2800 rpm - Cutting range approx.: - at 90° circular 140 mm - or rectangular 170 x 140 mm - Miter adjustable to the left and right 45 - 90 - 30° - Pneumatic saw blade feed - Pneumatic quick-release clamp Gsdpfxjzrvfwj Ag Tjka - Pneumatic connection - Original machine base - Infeed roller conveyor 3000 mm - Outfeed roller conveyor with measuring stop 6000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 650 x H 1550 x D 1000 mm - Machine weight approx. 150 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) Gjdpfxoztl Sce Ag Tska - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, The cutting angle can be continuously adjusted manually within a range of 90° to 45°. Highly precise material feed, even with multiple feed cycles when cutting longer workpieces. Individual feed length: 500 mm. High feed rate possible while maintaining maximum accuracy. The 7.5-inch color touchscreen enables simple and intuitive control of all machine functions. The control unit allows programming of up to 60 programs for quick adjustment of the feed length. The machine can be controlled fully automatically, semi-automatically, or manually. The standard equipment includes control of the feed pressure, a stationary clamping device, and the feed rate. A frequency converter enables continuous adjustment of the saw blade speed within a range of 15-90 m/min. Cutting range examples: 90° round: 260 mm 90° square: 245 mm 90° rectangle: 245 x 250 mm +45° round: 180 mm +45° square: 170 mm +45° rectangle: 180 x 120 mm Including: Coolant system Godeztva Depfx Ag Toka Pressure gauge for saw blade tension Mechanical saw brush Material slide

Condition: new, Robust band saw for steel and stainless steel. Double-bevel cuts, up to 60° to the right and up to 45° to the left. 2 speeds: 35 and 70 m/min. Manual lifting of the saw frame, assisted by tension springs. Downward movement is achieved by gravity, dampened by an oil damper with an adjustable throttle valve. Cutting capacity examples: Round: 90°: 235 mm -45°: 165 mm +45°: 185 mm +60°: 115 mm Rectangular: 90°: 280 x 180 mm -45°: 185 x 80 mm +45°: 185 x 100 mm +60°: 115 x 80 mm Gksdpfx Agoztu R Ij Tea With: Cooling system Vise with quick-release mechanism Mechanical material stop Manometer for saw blade tension Mechanical saw brush - Also available in the ARG 260 Plus version (cutting capacity for round stock: 260 mm) – available from stock!

Year of construction: 2026, condition: used, consisting of: 1 PAMMINGER Flyer 2.4 VA stretch wrapping unit, year of manufacture: 2009, serial number: M00812, 1 MESSERSI PR9 banding unit, year of manufacture: 2009, serial number: 3421, roller conveyor, protective enclosure, control system. Gkjdpfx Aezqzb Ijg Toa

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Gsdpfxjzrd Rzs Ag Tjka Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Godpfx Aozrd Nqog Tska Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)