Used Band Saw Machine for sale (92,480)

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition Ibodpsiv A U Ejfx Aacoc

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm tooth pitch 20 - 50mm Ibsdsglui Aepfx Aacec

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Ijdpsxdbzbofx Aacobc Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Ibedpeudi Unjfx Aacsc Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: excellent (used), Year of construction: 2006, Veneta Papper band-separating saw with feed Wheel diameter 800mm Maximum cutting width 166mm Maximum cutting height on feed 170mm Maximum cutting saw width 40mm Material pulling belt 2 top pulling rollers Automatic access to the set dimension Quick selection of 4 saved programs Motor power 5.5kw CE certificate Ibodpfx Aek Ny Emjacoc

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, BEHRINGER HBE 321 A from year 2015, with accessories. Available from stock. The machine will be reconditioned by us including a major inspection. Saw band 4440x34x1.1 mm, cutting range 320 mm round – flat 350 x 320 mm, flood cooling and minimal lubrication, hydraulic clamping units, roller conveyors and coolant collection tray. Ibjdpfswzi Iyox Aacsc

Condition: ready for operation (used), Bandsaw sharpening machine Manufacturer: Loroch Model: BL 65 Special machine for wide bandsaws for straight grinding Bandsaw width approx. 100–300 mm Ibjdpfjw Hbzvox Aacjc Tooth pitch approx. 25–100 mm Tooth height max. approx. 35 mm Specifications partially estimated! The machine will be technically tested and cleaned upon order.

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Ibedpfed Sr Siox Aacoc

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, saw band length: 5,780 mm, saw band width: 41 mm, cutting range round steel at 45°: 450 mm, cutting range round steel at 90°: 450 mm, input voltage: 400 V, cutting range square steel at 90°: 450 mm, cutting range square steel at 45°: 420 mm, Semi-automatic sawing machine with 1-sided miter. (Also available with 2-sided miter.) Hydraulically operated material clamp. Hydraulically operated saw frame. Brand: KMS Type: KMY DG 450 Saw motor: 3 kW Height of support table: 888 mm Max / Min clamp opening: 0 / 740 mm Clamp height: 240 mm Mitre: 1 side Down speed: Continuously adjustable Cutting speed: Continuously adjustable, 20 - 90 m/min Iodpfxevy Swij Aacebc Band dimensions: 5780 x 41 x 1.3 mm Weight: ± 1600 kg Capacity: 90° (right angle): Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 680 mm 60°: Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 570 mm 45°: Round: Ø 450 mm Square: 420 x 420 mm Rectangle: 350 x 480 mm 30°: Round: Ø 350 mm Square: 330 x 330 mm Rectangle: 240 x 450 mm Incl. 2 short roller tracks. (not shown)

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 Ibsdsvuf S Njpfx Aacec 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: new, Year of construction: 2025, machine/vehicle number: MR005920, Band saw from the Aura series by Casadei. These machines are equipped with cast iron wheels and sturdy construction. The wheels have a diameter of 560 mm. Price is ready to use, af hine is equipped with the following options: - Bottom guide with bronze guide elements Technical specifications: Ijdpjwd Icnofx Aacsbc - Diameter saw wheels: 560 mm - Length saw band: 4,450 mm - Maximum cutting height: 370 mm - Maximum cutting width: 550 mm - Table length: 700 mm - Table width: 930 mm - Motor power: 3.5 hp - Serial number: SOC 01/25

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Isdpfx Asgf H Sajacsbc Footprint : 2,8X2,8X2m

Condition: used, functionality: unexamined, machine/vehicle number: 16124 91, saw band length: 4,100 mm, total length: 2,000 mm, total width: 1,150 mm, feed length X-axis: 1,200 mm, JAESPA W 320 G Horizontal Bandsaw Automatic 320 mm Ijdpfxjw Dzvns Aacebc Hydraulically controlled horizontal bandsaw for solid and profile materials Cutting range round: approx. 320 mm Material clamping: hydraulic Saw band length: 4100–4170 mm Machine control: manual/hydraulic Type plate no.: 16124 91

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Iodpoq Atyzofx Aacebc Measured at the operator's workplace Including the two roller conveyors shown.

Year of construction: 1988, condition: good (used), machine/vehicle number: 388236, Part number MA1160 Manufacturer Behringer Type HBP 220 A Year of manufacture 1988 Machine-No. Iodpfx Aelkdd Heacsbc 388236 Length [mm] 1500 Width [mm] 2400 Height [mm] 800 Weight [kg] 1500 Connected load [mm] 380 Working range [mm] Round 220 Automatic feed YES Gear [rpm] 20-140 Saw blade diameter 3720 X 32 x 1,1mm Cutting area 350 X 220mm

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2500 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Ibsdpfx Aeudi Uzeacsc Weight [kg] gross/net - 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, saw band length: 4,700 mm, saw band width: 1 mm, total height: 34 mm, total length: 230 mm, total width: 2,400 mm, Selling a MEBAMAT 330 12,500 operating hours The machine has cut 99% of plastic. You can find the machine's technical specifications at MEBA. Ibsdpfxswhix Es Aacjc

Year of construction: 1980, condition: ready for operation (used), Band saw machine Make KÖLLE Type:ST 105 Year 1980 overhang 1050 mm with saw band - welding device IDEAL . Infinitely variable speeds. Machine ready for use condition. Ijdpfx Ajmp Trwsacsbc

Year of construction: 2022, condition: as good as new (ex-display), DROSTE Welding Table for band saw blades: for new blades and for welding cracks ST260: Automatic with TIG or MIG System Automatic welding feed programable Annealling System Preheat plate Iodpfx Aajuh Sp Nocobc Technical Details: Blade width: 30 – 260 mm Blade thickness: 0,6 – 2.0 mm

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Isdefww Sqjpfx Aacebc Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 113307651086088, saw band length: 4,115 mm, saw band width: 38 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, cutting height (max.): 260 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Iedpfewqw Tvsx Aacobc Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. Ijdpemrnk Esfx Aacjbc The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2500 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Ibjdpfjgculvex Aacjc Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, CORMAK BS530H Metal Band Saw – A Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal band saw is an efficient semi-automatic bandsaw designed for precise cutting of steel elements, pipes, and profiles at various angles. Its solid cast-iron construction, reinforced blade guidance system, and advanced hydraulics make it ideal for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all functions, significantly reducing operation time and improving workplace ergonomics. Key Advantages of the Machine Semi-automatic operation – hydraulic arm lifting/lowering and vise control via control panel. Worm gearbox with bronze components ensures smooth, vibration-free, and precise operation. Stepless cutting speed adjustment from 20 to 70 m/min – suitable for various materials. Carbide and ball-bearing blade guides for durability and precise blade tracking. Quick-release vise, manually or hydraulically controlled, adjustable left/right. Miter cutting range from -45° to +60° with precise angle scale reading. Heavy-duty cast-iron frame ensures cutting stability and long machine life. Hydraulic feed rate control with adjustable return height of the saw arm. Construction and Technology The BS530H model features a reinforced drive system and industrial-grade hydraulics, ensuring reliable performance under intensive use. The massive frame construction minimizes vibration and ensures consistent cutting performance. An ergonomic control panel allows full process control from one location. The coolant system, integrated into the base, efficiently removes heat and debris, protecting the blade from overheating. Cutting Precision and Efficiency With stepless speed control, manual or semi-automatic operation modes, and a dial gauge blade tension meter, the BS530H delivers repeatable, high-quality cuts, even in long production runs. A material support roller and arm lock after the cutting cycle enhance operational safety and efficiency. Applications The CORMAK BS530H is dedicated to industrial production facilities, metalworking shops, and companies performing serial cutting of profiles, pipes, and solid steel sections. It’s ideal for serial manufacturing, prefabrication, and component preparation for welding or further processing. Standard Equipment Control console with semi-automatic functions Hydraulic vise Blade cleaning brush Coolant system with pump Front material roller Dial gauge blade tension meter Ijdpfew U Svlox Aacjbc CE certificate and technical documentation (DTR) Technical Specifications: Parameter Value Working height 965 mm Cutting speed 20 – 70 m/min Blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total power 3.0 kW Power supply voltage 400 V Dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: new, Year of construction: 2025, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Ibjdpfjw U Skvsx Aacoc Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.