Used Ballast Recycling for sale (2,489)

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55 Dwodpfx Asd Dy Ugogdjb

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SEH-80X, power: 2.79 kW (3.79 HP), fuel type: gasoline, number of cylinders: 1, cubic capacity: 133 cm³, nominal power: 4.04 kW (5.49 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 3,900 rpm, overall weight: 33 kg, total length: 600 mm, total width: 600 mm, total height: 600 mm, torque: 10 Nm, type of cooling: air, The Koshin SEH-80X is a high-quality, professional 3-inch (80 mm) gasoline-powered water pump, driven by a reliable Honda GX160 four-stroke engine. This self-priming centrifugal pump is specifically designed for the rapid transfer of large volumes of clean to slightly contaminated water, making it widely used in construction, agriculture, shipping, and emergency drainage applications. Key specifications: • Capacity: Maximum 930 to 1,100 liters per minute (approx. 54 m³/hour free discharge). • Head: Maximum 26 to 30 meters. • Suction lift: Maximum 7 to 8 meters. • Engine: Air-cooled Honda GX160 (163 cc / approx. 3.9 to 5.5 HP). • Connection: 3" external thread (80 mm) for both inlet and outlet. • Solids passage: Suitable for solids up to a maximum of 3 mm. • Fuel tank capacity & runtime: 3.1 liters, providing approximately 2 hours and 10 minutes of continuous operation. • Weight & Dimensions: 30 kg with a compact size of 52.5 × 38.9 × 45.8 cm. Construction & Durability • Robust pump housing: Made of lightweight and exceptionally strong die-cast aluminum. • Cast iron internals: The impeller and impeller housing are made of cast iron for excellent wear resistance against abrasive particles (such as sludge). • Mechanical shaft seal: Features a high-quality carbon-ceramic seal that prevents leaks and significantly extends the service life. • Protective frame: The entire unit is mounted in a sturdy steel rollover frame with rubber vibration dampers to reduce mechanical stress. • Oil Alert: The engine automatically shuts off when the oil level drops too low to prevent engine damage. Performance at different heights The pump delivers less water as the head increases: • Free discharge: 54,000 liters per hour • At 5 meters: 49,500 liters per hour • At 10 meters: 42,000 liters per hour • At 20 meters: 27,000 liters per hour The SEH series uses the more expensive and high-quality Honda engine. Heavy-duty ballast pump for shipping, construction, etc. Type: SE Color: black Pump type: self-priming centrifugal pump Impeller type: open impeller Engine type: 4-stroke HONDA gasoline engine Shaft seal: mechanical seal of ceramic on carbon Impeller material: cast iron Impeller housing material: cast iron Pump housing material: aluminum Pump shaft material: stainless steel Liquids: slightly contaminated water At 10 meters: 42,000 liters per hour At 15 meters: 36,000 liters per hour At 20 meters: 27,000 liters per hour At 25 meters: 9,000 liters per hour Dimensions: lxbxh = 525 x 399 x 476 mm Weight: 34 kg Engine type: HONDA, GX160, 4-stroke engine, E5 gasoline Shaft power: 2.79 kW, 3.8 hp at 3600 rpm Dwjdpfx Aezw U Nlsgdjb Shaft power: 4.04 kW, 5.5 hp at 4000 rpm Fuel tank capacity: 3.1 liters, approx. 2 hours and 10 minutes

Condition: used, Year of construction: 2006, machine/vehicle number: PST18, Tecnoindustria Used Pasteurizer Completely Overhauled Tecnoindustria brand mesh pasteurizer all stainless steel with squared stainless steel mesh complete with water recycling tanks with relative pumps, infeed and outfeed belt for jars or boxes, blower for drying jars or boxes, steam modulating group, heat exchanger, various connecting pipes and all its accessories for operation. The machine is totally overhauled It is made up of two sectors of which: first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400 Features by section Sterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,300 useful Length of warm water cooling + cooling: mm. 7,000 useful Height mm 1400 Single track entry belt width: mm 200 Djdsvguhkopfx Agdjwb Length: mm 3200 Single lane outfeed belt with Intralox belt width: mm 400 length: mm 3700 useful Tecnoindustria Used Pasteurizer Completely Overhauled, The machine is totally overhauled, in excellent condition. It is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized. The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: used, Year of construction: 2004, operating hours: 2,000 h, machine/vehicle number: PST17, Used Pasteurizer brand PG Completely Overhauled Used Pasteurizer Completely Overhauled for jars or cans in d.b. PG brand, all stainless steel with squared stainless steel mesh, complete with 4 water recycling tanks with relative pumps. Dodpfx Agevguhwodswb Pasteurizer equipment for sale with inlet and outlet belt, blower for drying jars or boxes at the outlet, steam modulating group, shell and tube heat exchanger, various pipes connections, and all its accessories for operation. The pasteurizer equipment for sale is totally overhauled Pasteurizer equipment is made up of two sectors of 9500 mm each Overall dimensions of the Used Pasteurizer PG: Total length 19.00 m Useful belt length axis by axis: 18.60 ms Useful net width 2.50 m. Overall width 2.70 m machine body Overall width including trays 3.30 m Total useful area of the Used Pasteurizer Completely Overhauled sq.m. 46 Features by section: Sterilization length: mm. 8,600 Pre-cooling length: mm. 2,500 Length of warm water cooling: mm. 5,000 Cooling length: mm 1900 Single track entry belt width: mm 150 Length: mm 3800 Outfeed belt with 4 lanes width: mm 350 Pasteurizer equipment for sell length: mm 3500 Services for pasteurizer equipment for sell: We also offer the machinery reinstallation service at your company if you need it. We will create a dedicated offer if you wish, only after receiving all the necessary information. Upon request, we can also modulate the control panel and intervene on the machine’s PLC. This is used to customize the functionality of the used pasteurizer for sale. If requested, we also provide the packing service if the goods are destined abroad and with transport by ship. One of our team of technicians will be at your service and will create a tailor-made project for your company. We have many solutions available for this pasteurizer equipment for sell, contact us at the numbers on the site for more information and to receive a quote for one of our used bottling machines. Additional information: For this pasteurizer equipment for sell it is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized. The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: used, Year of construction: 2017, machine/vehicle number: AT86, Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph Technical Specifications and Use of the heating tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph heats bottles using a hot water system, which makes it ideal for applications in the bottling industry. Moreover, this heating tunnel performs reliably and includes advanced technical features. It handles cylindrical bottles of various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The used heating tunnel employs a hot water heat exchanger, and users need to supply hot water through a gas boiler. Consequently, this setup heats the bottles uniformly and optimizes the workflow. Additionally, the recycling pump and dryer consume 53 kW of energy, which ensures energy efficiency while maintaining high performance. Furthermore, the used heating tunnel processes 12000 bottles per hour (bph), which makes it particularly suitable for high-speed bottling lines. Its FIFO (First In First Out) single-file system organizes bottles into a continuous and orderly flow. As a result, the system ensures consistent thermal treatment. In terms of compatibility, the machine handles cylindrical bottles with diameters ranging from 60 mm to 100 mm. Therefore, it provides versatility for different formats and types of containers. Additionally, the tunnel operates counterclockwise (right-to-left), which suits specific production layout requirements. Usage Conditions and Manufacturing Details The heating tunnel HTD12 operates in an “as-is” condition, so buyers must inspect the machine thoroughly before purchase. Notably, the manufacturer built this model in 2017, delivering a reliable and high-quality solution for integrating a heating tunnel into production lines. Omar R&G, a company renowned for producing high-quality machinery for the bottling industry, designed the HTD12 model to withstand intensive use. Consequently, it maintains operational reliability even in demanding environments. Technical and Functional Advantages The hot water heat exchanger delivers precise temperature control, which ensures uniform bottle heating. Moreover, the FIFO system keeps bottles in their entry order, which minimizes delays or errors during processing. In addition, the modular design and optimized layout simplify maintenance. Users can, therefore, integrate the tunnel quickly into existing lines. Furthermore, the system accommodates bottles of different diameters, providing versatility for diverse industrial applications. Conclusion of the Heating Tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph provides a high-performing, reliable, and versatile solution for bottle heating. Moreover, the machine processes 12,000 bph, organizes bottles efficiently using the FIFO system, and supports various formats. Consequently, it proves to be an excellent choice for high-productivity bottling lines. Thus, this HTD12 model by Omar R&G combines high performance with operational simplicity. As a result, it becomes a solid choice for industry professionals who seek reliability and efficiency. Therefore, for companies that prioritize productivity and precision, this machine represents a long-term investment. Dsdpfx Agjvxz Axedjwb

Year of construction: 2026, condition: new, Cable Stripping Machine G.R.S. 3 + SALE: was 2.000,— € before - limited offer now! New Price: 1.200 € Technical Data: Dimensions: B/H/T 40 cm / 60 cm / 45 cm Weight: ca. 78 Kg Color: grey Dwodpfx Agsi Daxxsdeb Speed: app. 18 Meter pro Minute Engine: 230V / 3000W left/right Extras Emergency-off switch Fast and powerful cutting of various cable dimensions Stripping of cables with a cross section of 1 - 80 mm and an insulation thickness up to 20 mm. High-performance HSS steel blades are suitable for various types and thicknesses of cables and wires such as oil flex cables, underground cables, household cables, fire protection cables and other cables.

Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Weight approx. 1500 kg Note: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel. Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Dodev Nhk Depfx Agdowb Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Manufacturer: H. Dreher, Side-mounted mill cutting mill -Type: S26/26 Djdpfszf Ng Usx Agdswb -Drive motor: 5.5 kW -Number of cutting blades: 4 pieces -Number of counter blades: 2 pieces -Sieve perforation: Ø 8 mm -Rotor width: 250 mm -Rotor diameter: 260 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 650/1460/H1880 mm -Weight: 475 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,000 kg, rotor diameter: 400 mm, number of blades: 10, total length: 1,120 mm, total height: 1,950 mm, control cabinet length: 500 mm, control cabinet width: 300 mm, control cabinet height: 1,500 mm, total width: 1,210 mm, rotor width: 600 mm, power: 22 kW (29.91 HP), type of input current: three-phase, sieve perforation: 6 mm, warranty duration: 12 months, input voltage: 400 V, inner dimension width: 590 mm, opening width: 400 mm, Equipment: CE marking, ZERMA GS 400/600 – High-Performance Granulator | Precision. Performance. Reliability. Experience the new ZERMA GS 400/600 high-performance granulator in action. The GS series was developed for the highest demands in plastic recycling and combines maximum performance with exceptional reliability and easy maintenance. Dodpszmhgiefx Agdswb Highlights ✔️ Rotor diameter: 400 mm ✔️ Rotor width: 600 mm ✔️ Proven ZERMA V-Cut technology ✔️ 5-knife rotor ✔️ 3 stator knives ✔️ Robust steel construction ✔️ Intelligent drop-down cutting system ✔️ External knife adjustment ✔️ Robust bearing outside the cutting chamber ✔️ Optional bypass hopper for long profiles and pipes ✔️ Designed for continuous industrial operation Typical applications * Packaging tapes (at 8 mm, 600 kg/h) * Runners and injection molded parts + start-up lumps up to 1 kg * Plastic profiles * Pipes * Sheets * Films * Blow molded parts * Engineering plastics * Production waste * Post-industrial recycling The GS 400/600 stands for precise shredding, high throughput, and long service life – the ideal solution for modern plastic processors and recycling companies.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Dwodpezp H R Ejfx Agdsb Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Note: The machine is in good working order. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Inspections are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, prior sale is reserved, and they can be revoked at any time. Dedpfxszt Into Agdswb Inspections are possible by arrangement. The sale is ex works, without warranty.

Condition: good (used), Year of construction: 2017, operating hours: 432 h, functionality: fully functional, HSM baling press, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Dwjdpfx Agjzt N Afjdjb Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: ready for operation (used), * Brand: dbr Fördertechnik Dsdpfjy R Rvwex Agdowb * Surface: 5000 x 2000 mm – 1 deck. * Driving: E-motor 15 kW * Incl.: springs and springsupport. * Stock: 2 pieces.

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 1904150116, year of last overhaul: 2025, overall weight: 6,800 kg, We offer this used Forrec Granulator - 1000 R.A. rotary shear, year of construction 2019. Manufacturer: Forrec Model: Granulator - 1000 R.A. Year of construction: 2019 Condition: used Category ID: 552 Type ID: 2731 Machine type: rotary shear If you have any questions or need more information, feel free to send us a message or give us a call. Dsdpfx Aszmyufogdewb

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. Dsdpfx Agszmzbmjdjwb The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 1999, condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades Dwsdpfxezrfbno Agdsb -Manufacturer: Getecha, Side-mounted mill cutting mill -Type: GRS182-A1.50 -Inlet cross-section: 310 x 290 mm -Sieve perforation: Ø 6 mm -Dimensions: 720/700/H1220 mm -Weight: 210 kg

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 215 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2150mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dodpfxozry N Ts Agdowb Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, functionality: fully functional, Are you looking for an ironclad supply or discharge conveyor we will build them for you in any size or shape. We are also an excellent partner for your drain screws. Dwsdpfx Ast Iwgnogdsb Conveyor belts, supply belts in almost any size, with closed sides, carriers etc. etc. entirely according to your wishes and requirements.

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Dwjdpfjh Eydujx Agdjb Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Condition: new, Year of construction: 2026, functionality: fully functional, The compact, lightweight conveyor is equipped with a high-speed carbon brush motor. It is easy to install and provides excellent vacuum. Removable, user-friendly controls. All conveyors are equipped with a fabric filter and automatic reverse cleaning. Carbon brushes with automatic shut-off for maintenance alarm. Control is possible via the SPV-U proportional valve controller. Dwedpfxeqgdkbe Agdeb 360° mounting possible. All conveyors are equipped with a fabric filter and automatic reverse cleaning with alarm.

Year of construction: 2009, condition: good (used), machine/vehicle number: D7143, Mogensen Sizer SG1544 1500 mm wide Screen deck length 1350 mm 4 screen decks 4 pole motor Dwodpfx Aovw Uqyogdob

Condition: ready for operation (used), * Brand: Hazemag * on stock: 3 pieces Dedsywm Uvspfx Agdjwb * A-A length: 12.000 mm, Beltwidth: 650 mm, Driving: 5,5 kW e-motor.

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Dsdsyu Srmepfx Agdewb Wetting system Removable hopper extension plates on both sides Delivery date by arrangement

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Detailed description For sale: complete aisle Automated Storage and Retrieval System (AS/RS) (Knapp) Ideal lot for integrators and logistics companies wishing to enhance their automated storage capacity. Sold as is, complete lot ready for installation. Less than 100 hours of service! Lot contents: • 10 OSR units (Knapp shuttles) – shuttles for automatic storage and handling • 2 lifts (for connecting levels) • Infeed and outfeed conveyors included (for easy integration into the existing flow) • 2,200 SILVERLINE plastic containers, European standard (or equivalent) + dividers included • Ladders, rails, and crossbars for racking (structural elements for storage) • Protective mesh (production) • No picking stations included Condition: equipment very little used. Inspected and functional. Sold as is. Numerous spare parts available! Delivery and installation possible, please contact us! No control system service or installation (software) provided. Advantages: • High automated storage capacity (2,200 containers) Dwodpfxsxtfa Hs Agdjb • Modular Knapp OSR solution, compatible with modern automated environments • Conveyors included to facilitate flow integration Price: €340,000.00 excluding VAT (complete lot). ⚠️ Important: ISC Recycle only handles the sale of the equipment. Integration available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, RSS 2-shaft shredder, 800 series, 2 x 7.5 kW Rotor length: 800 Blade thickness: 20 mm The machine can be customized to your specifications, including the control panel. Delivery time upon consultation. Infeed and outfeed conveyor belts are available as an option. This shredder is ideally suited for destroying, for example, hard drives, laptops, mobile phones, rubber, wood, paper, etc. Want to know more? Call or email us. Upon consultation, we can also deliver and install the machines. Please provide your name, company name, and a valid telephone number so we can respond quickly. Dedpfx Aew Ry Aljgdowb