Used Bale Wrapper for sale (838)

Condition: good (used), Make: Kallfass Type: semi-automatic Foilwrapper /shrinking tunnel Model: Combi-simplex Frame: steel painted Range: max. pack W x L x H = 600 x 380 x 320 mm Capacity: max. 600 packs/hr Dimensions: L x W x H = 2650 x 1400 x 1650 mm Bljdpoiaumuefx Abber Weight: 650 kg Power-supply: 380 Volt – 50Hz – 11,5 kW Features: mobile semi-automatic 2 hand control Remark: good condition (some minor repairs needed)

Year of construction: 2021, condition: new, Wrapman STH model with fricioned roller carriage and manual tension adjusting of the film.The machine works with any type of stretch film. Blsdpfxehc Nubo Abbor Alternatively: Machine with motorized Power pre-stretch of 100% (option 200%). Half the costs of packaging and its ideal for light and unstable products

Condition: excellent (used), For sale: 2 units Atlanta Avvolgitore robotic pallet wrappers, year of manufacture 2018. Both machines are in good condition. I have inspected and tested them personally. The first wrapper does not have new batteries, but it is equipped with a film cutting unit. This means that at the end of the wrapping cycle, it automatically cuts the stretch film, saving an extra step. New batteries can be fitted for an additional charge. Bjdpfx Aowz R Ubjbbelr The second wrapper has recently been fitted with new batteries, but it does not have a film cutting unit. Therefore, the film must be cut manually on this machine. These robot wrappers operate autonomously around the pallet and, thanks to their articulated arm, are also suitable for use in spaces with low ceiling heights. Despite that, they are still capable of wrapping up to 210 cm in height. Both machines are equipped with an effective film pre-stretch system which allows you to save significantly on stretch film consumption! Pricing: Robot wrapper with film cutting unit: €3,800 Robot wrapper with new batteries: €3,950 A video of the machines in operation can be provided on request via WhatsApp. Part exchange for a (defective) pallet wrapper is possible. Multiple robotic pallet wrappers are available from stock; please feel free to enquire about current availability. Keywords: stretch wrapper, pallet wrapper, wrapping machine, pallet wrapping machine, robotic wrapper, wrapping robot, robot wrapper, film wrapper.

Year of construction: 2001, condition: excellent (used), PFM Flow wrapper Model: Tornado-BBLDSS Serial: C-6096 2001, Stainless, The Tornado LD is a horizontal flowrapping machine that produces up to 100 packs/min with hermetic seals from a flat reel of heat seal wrapping material. The Tornado LD is specifically designed for “M.A.P.” (Modified Atmosphere Packaging). with smartdate X40 coder, infeed length 2400mm, flow wrapper length 3200mm, jaw width 220mm, various belt for infeed, 3Ph Bedohr D Uvjpfx Abbelr

Condition: new, Year of construction: 2025, Attachment suited for: Agricultural machines Bledpfx Abjxrnv Uobsr

Year of construction: 2007, condition: used, functionality: fully functional, For sale: Packaging machines / stretch film machines / stretch film wrappers Package sale 2x Walstar Waldyssa W33, year 1997 1x Walstar Waldyssa B-188, year 2007 Blodpjxz Dr Dofx Abbor All machines are in good condition and ready for use. The equipment was used for packing mushrooms. Packing sizes: Minimum: 90 × 110 × 10 mm Maximum: 200 × 300 × 160 mm Film width: approx. 280 mm to 550 mm Capacity: up to 28 packs per minute On request, a label printer, a weighing station with scale, and two folding machines for cardboard boxes can also be included (not shown). Transport can be organized at buyer's expense.

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Bjdpfxjxwyvqs Abbjlr

Condition: ready for operation (used), Year of construction: 2003, Baling press HSM 500.2 VL Fourfold wire bale tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000–1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Bjdpfora Ak Eex Abbolr Power supply (V): 400 (three-phase) Year of manufacture: 2002–2005, price: 3,400 EUR Baler HSM V Press 500.2 VL Year: 2006–2008, price: 3,600 EUR Transport height: 2600 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 253, cutting width (max.): 1,600 mm, overall weight: 3,000 kg, working width: 1,600 mm, space requirement length: 3,700 mm, space requirement width: 2,500 mm, Equipment: safety light barrier, Thanks to the turret rewinding technology, the machine can be unloaded and reloaded while it is rewinding. This results in extremely high daily output, for example with plotter rolls. The machine comes with 3-inch and 2-inch winding shafts. The unwinding station can accommodate master rolls up to 1000 mm in diameter with 3-inch and/or 6-inch cores. The unwinding brake is sensor-controlled, and a splicing table allows for loss-free and stable web splicing during roll changes. Supplied blade holders: 5 units. We will dismantle the machine and load it onto two pallets. The buyer’s staff can be present during dismantling and a few days prior for training on the machine. Bedpfxoxvrcmj Abbslr

Condition: good (used), Year of construction: 2019, C and C Cresco Pallet wrapper Serial: C1900145M Bsdpfx Aotu N Dxjbbjlr 2019, pallet wrapper, diameter turntable 1650mm, adjustable speed and tension controls, capacity 2000Kgs, with ramp, 1Ph

Condition: good (used), Year of construction: 2015, Year of manufacture 2015, serial number 413.00.032, pressing force 600 kN Bodpsxwc Naefx Abbolr

Condition: used, Year of construction: 2004, Used Shrink Wrapper MIMI – Overview This used MIMI shrink wrapper is engineered for grouping and overwrapping PET bottles into stable retail-ready bundles on a modern used bottling line. Designed for industrial packaging and beverage production, it delivers dependable second hand performance with efficient film-only bundling. The machine is configured for straight infeed handling of round bottles and supports multiple pack patterns without cardboard backing, making it a versatile choice for high-throughput packaging operations. Built for continuous-duty operation, this shrink wrapper is well-suited to integrate into existing bottling equipment and packaging machinery. It is a strong fit for beverage production environments where consistent pack quality, format flexibility, and reliable throughput are essential. With compatibility for common PET bottle sizes and standard pack matrices (3×2, 2×4, 3×4), it helps reduce material consumption by eliminating trays or pads while maintaining pack stability after heat shrinking. Technical Specifications & Performance Data Manufacturer: MIMI Machine type: Shrink Wrapper Year of manufacture: 2004 Capacity: up to 6,000 bottles/hour or 100 packs/hour (depending on pack configuration) Bottle sizes supported: 0.33L, 0.5L, 1.0L, 1.5L Container types: PET bottles Pack configurations: 3×2, 2×4, 3×4 (trayless, no cardboard backing) Infeed orientation: Straight infeed for round bottles Advanced Automation & Control Systems The machine is designed for inline, conveyor-fed operation typical of automatic shrink wrapping systems. Standard industrial protections and operator interfaces support routine adjustments and format changes. Exact PLC/HMI, electrical ratings, and power data are not specified in the available documentation. Production Line Integration Capabilities This shrink wrapper integrates smoothly with upstream and downstream bottling equipment, including conveyors from fillers, labelers, and pack conveyors to palletizing. The straight infeed accommodates round PET bottles and allows quick transitions between pack matrices. Its trayless film bundling reduces material handling and simplifies logistics while maintaining pack integrity after the shrink tunnel. Machine Condition & Maintenance History The machine was removed from service in 2019 and is currently not in active production. It is offered as a second hand unit suitable for recommissioning. Specific maintenance logs and operating hours are not provided in the available documentation. Blsdpfx Abjxurm Ajbsr Operational Performance & Versatility Optimized for PET bottles, this shrink wrapper covers the most common beverage bottle sizes from 0.33L through 1.5L. Its ability to produce 3×2, 2×4, and 3×4 bundles without cardboard backing supports cost-efficient industrial packaging while preserving good pack stability following shrinking.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Blsdpfx Aeu Tg I Dobber Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Bljdpora Nyujfx Abber Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 2,500 kg, empty load weight: 1,227 kg, total length: 1,500 mm, construction width: 1,130 mm, opening width: 1,860 mm, Cellulose/bale clamp Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good Bljdpfxsu D S Tie Abbsr Description: Rotation range 360° Opening range 560-1860 Arm height 900mm Arm length 1150mm

Condition: used, machine/vehicle number: 41782, Stainless infeed 1500mm, 200mm jaw width, adjustable temperature jaw / fin seals, overall length 2500mm Bledpfedg H Svsx Abbjr

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Machine decommissioned Bljdpfew E Htuex Abbjr

Condition: used, Year of construction: 2025, operating hours: 86 h, Compressed air | Knives: 25 | Pickup-hydraulic | Pickup support wheel | Roller hold-down | Claas Rollant 630 Uniwrap Year of manufacture: 2025, currently 422 bales pressed (as of 26.06.2025) Technical specifications: - Baler-wrapper combination with 1.25 m chamber diameter - Chamber width 1.20 m MULTIFLOW pickup: - Pickup width 2.10 m - Gauge wheels, pendulum mounted, with 16x6.5-8 tyres - Dual feed augers PRO cutting floor: - Hydraulic suspension and lowering cutting floor to prevent blockages - Operation via terminal including optical and acoustic signals ROTO CUT cutting rotor: - Cutting rotor with four spirally arranged tine rows - Individually protected knives against foreign objects - Hydraulic knife group selection Chamber: - 16 profiled steel rollers - Rear door with hydraulic locking - Greasable baler roller bearings Wrapping unit: - Fully automatic control - Twin wrapping arms with 750 mm film pre-stretchers - Wrapping speed max. 36 rpm for 6 layers of film in 23 seconds - Terminal for direct access at the wrapping table - Hydraulically lowerable film magazines for 12 spare rolls - PROFI CAM camera and work light for wrapper illumination Bjdpfx Aswvwtaobbjlr - Continuous chain lubrication - Hand wash tank incl. soap dispenser - Hydraulic requirements: load-sensing and 1 x single-acting Equipment: MULTIFLOW Pickup HD with twin roller hold-down Dummy knives, set of 25 ROTO CUT cutting rotor with hydraulic swinging PRO cutting floor, 25 knives PREMIUM LINE knife set, 25 pieces Film pre-stretch 82% Bale transfer guide ROLLATEX net tying Single wide-angle PTO shaft with cam-type clutch, 6-piece Tractor hydraulic connection, comfort Adjustable support stand Hydraulic/electronic ROTO CUT swinging floor K80 ball head hitch, MR Tyres: 600/55 R26.5 Dual-line compressed-air brake system, up to 40/50 km/h LED high-end work lights including service lighting Screen for PROFI CAM CEMIS 700 Automatic central lubrication system, electrically actuated Extended tool set | Internal no.: 11264178

Condition: used, Technical data for the bale loosening drum: Manufacturer not known Bjdpju Thx Rsfx Abbelr Type of bale loosening drum Year of manufacture not known Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Bale loosening drum Frame with drive and roller bearings for the bale loosening drum Comments: Documentation (operating instructions, CE declaration, electrical/hydrical circuit diagram) is not available and cannot be supplied. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Bjdpov Ai Tgsfx Abbjlr Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Year of construction: 2013, condition: like new (used), Thermal shrink machines are devices that allow for very rapid (3–5 sec.) shrinking of bags around the packaged product by immersion in hot water. ADVANTAGES: • Attractive product appearance • Process started by a button on the control panel • Digital temperature regulation • Optimal hygiene • Robust stainless steel construction • Possibility of using insulating balls to improve process efficiency Bljdpfxsxx Tp Hs Abbjr • Base immersion enabled by hydraulic actuator movement TECHNICAL SPECIFICATION DT100 Machine dimensions: 880 x 1000 x 1320 mm Chamber dimensions: 600 x 800 x 220 mm Immersion depth: 220 mm Cycle time: 3–5 sec Weight: 155 kg Voltage: 400 V-3-50 Hz Power: 15.0 kW

Year of construction: 2007, condition: used, Europack Compact RTSW 2007, automatic sleeve wrapper, powered belt infeed, variable belt speed, adjustable tunnel & sealing temperature, teflon coated sealing jaw, aperture 350mm x 200mm, 3Ph Bledpfodbqxzsx Abbsr

Condition: excellent (used), Year of construction: 2017, Redpack P325E flow wrapper in immaculate condition. Stainless steel model with programmable controls. Photo shows the machine before cleaning as it has been in storage for a while. Bjdew Dyzvepfx Abbslr

Condition: ready for operation (used), Baler Hsm 155 VL Bljdpfx Absra Nrmjbjr Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Hsm 155.1 VL baler pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: good (used), Redpack P200 Flow wrapper Bjdeib Dc Depfx Abbolr Serial: 660 Stainless flow wrapper, 5500mm overall length with 3500mm infeed, 300mm jaw width, max product height 120mm,