Used Bale Breaker for sale (910)

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,000 kg, Bale clamp Load center: 500 Nljdpfxex N Dp Ue Aa Ejk ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 2A (41 cm) Sideshift valve Capacity 2,000 kg Opening range 540-1,800 mm Width 1,020 mm Clamps 770 mm ID OS1751

Condition: good (used), NNP Kibbler lump breaker Stainless kibbler, 7.5Kw motor, 3Ph Nedpfxjqw Uxdj Aa Eelk

Condition: used, functionality: unexamined, Ferwood Code: AGG0201 - Manufacturer Code: 147009FSFTI3R6 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Nodpjvu Uvdefx Aa Eolk

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Nljdjx H R U Sopfx Aa Esk Year of manufacture: 2012 Pressing force: 40 t

Condition: ready for operation (used), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressure: 63.46 N/cm² Drive motor power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Loading aperture (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 Plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 Plus, year 2019, price: €9,000 HSM V-Press 860, brand new, ex-display, year 2020, price: €13,000 Nodjra Rbgopfx Aa Eelk Bale binding: 4-fold wire tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (approx.): 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling aperture (mm): 1200 x 565 Cycle time (seconds): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 Plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Filling opening (W x H): 1500 x 651 mm Bale size (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Suitable materials: foil, cardboard Idle cycle time: 25 s

Condition: good (used), Circuit breaker, electrical circuit breaker, electronic circuit breaker -Manufacturer: Block, Electronic circuit breaker 24 V Nledpexn Ik Dsfx Aa Eok -Type: PCInput: DC 24 V / 70 A -Output: DC 24V / 8x 2-10A -Number: 2x circuit breakers available -Price: per piece -Dimensions: 125/40/H130 mm -Weight: 0.4 kg/piece

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,000 kg, Bale clamp Load centre: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Nedpfx Aox N Dp Ija Eolk Condition: Ready for use and fully operational Technical condition: Good Description: Year 2018 ISO 2A (41 cm) Sideshift valve Capacity 2,000 kg Opening range 540-1,800 mm Width 1,020 mm Clamps 770 mm ID OS1750

Year of construction: 2023, condition: used, New: Yes Empty weight: 41 kg Serial number: P21410070W Nljdpfx Aajxq Uprj Esk Transport dimensions (LxWxH): 3,4x2,9x4,1 Production country: JP Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information Rated current (A): 1000 Poles: 3

Year of construction: 2019, condition: used, overall weight: 1,400 kg, load center: 600 mm, load capacity: 12,000 kg, working range: 2,200 mm, machine/vehicle number: 449297, Hersteller: Durwen Typ: 805.5122-12.01 Aufnahme: Pin-Type / Direktmontage Bauart: Ballenklammer mit Seitenschub Baujahr: Abmessungen: Njdpfx Ajxw I E Hea Ejlk • Gesamtbreite: 2240 mm • Bauhöhe ohne Gitter: 930 mm • Gesamthöhe mit Gitter: 1200 mm • Innenmaß zwischen Trägern: 530 mm Öffnungsbreite: • min: 200 mm • max: 2200 mm Kapazität / Leistung: • Tragkraft: 12000 kg • Lastschwerpunkt: 600 mm Gewichte: • Eigengewicht: 1400 kg • Vorbaumaß: 450 mm Ausstattung: • Seitenschub vorhanden • Hydraulik komplett funktionsfähig • Klammerarme Heavy-Duty Ausführung

Condition: like new (used), NNP fruit breaker Njdpfskyr Iyex Aa Eslk Stainless, variable speed infeed conveyor, 370mm belt width, previously used on blocks of fruit, mobile, 3Ph

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Horizontal baler, DIXI 60 SLD waste press with tipping device Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Nodpjra A E Uefx Aa Eslk Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, shunt releases Nljdpfxsxnx A Re Aa Esk -Manufacturer: Siemens, Sirius motor protection switch type 3VA1180-4EE36-0AA0 -Device adapter: Rittal SV 9342.550 -Number: 1x switch available -Dimensions: 230/90/H205 mm -Weight: 2.0 kg

Condition: good (used), 1 x Ovoconcept Egg Cracker/Breaker Nledsn Utzispfx Aa Ejk Type: OVO 20 Serial Number: 248 Year: 2009

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Nodpfew E Htuox Aa Eelk Video of baler in operation available on request, further details and photos to follow Machine decommissioned

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Nlsdpsu Tg I Djfx Aa Eok Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, 7 pieces for sale! Nsdpfx Aaexq Nvys Eslk Condition: Used, dismantled from decommissioned equipment. Untested. The item shows normal signs of use. Technical Data: Manufacturer: ABB Model/Type: VD4 36.12.32 Serial No.: 1VC1BF00013886 Year of Manufacture: 2015 Classification: M2 Standards: IEC 62271-100 / CEI 17-1 Weight: 170 kg Rated Voltage (Ur): 36 kV Rated Lightning Impulse Withstand Voltage (Up): 170 kV Rated Short-Duration Power-Frequency Withstand Voltage (Ud): 70 kV Frequency: 50 Hz Rated Normal Current (Ir): 1250 A Rated Short-Time Withstand Current (Ik): 31.5 kA Rated Short-Circuit Duration: 3 s Rated Short-Circuit Breaking Current (Isc): 31.5 kA Rated Short-Circuit Making Current (Is): 79 kA DC Component at ≤30% Voltage: 50 A Operating Sequence: O–0.3s–CO–3min–CO Wiring Diagram: 1VCD400236 Drive Supply Voltage: 220 V (EL3, MBC, MBO1, MBU, MAS) Origin: ABB, Italy

Condition: used, Siemens Sirius Nledpjtvhv Ijfx Aa Ejk

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches -Schneider Electric: Type NSX 160L LV429372 -Rotary drive with: extension -without: gear knob -Terminal cover: 1 -Dimensions: 240/105/H575 mm Nedpoff H Nkefx Aa Eolk -Weight: 2.9 kg

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 2,500 kg, empty load weight: 1,227 kg, total length: 1,500 mm, construction width: 1,130 mm, opening width: 1,860 mm, Cellulose/bale clamp Load center: 500 Nlodpfx Aaou D S Tio Ejk ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good Description: Rotation range 360° Opening range 560-1860 Arm height 900mm Arm length 1150mm

Condition: ready for operation (used), Year of construction: 2003, Baling press HSM 500.2 VL Fourfold wire bale tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000–1200 Bale weight (kg): approx. 500 kg Nlsdpsra Ak Eofx Aa Ejk Technical data (L x W x H, mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Year of manufacture: 2002–2005, price: 3,400 EUR Baler HSM V Press 500.2 VL Year: 2006–2008, price: 3,600 EUR Transport height: 2600 mm

Condition: used, Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Njdpou Thx Rofx Aa Eelk Bale loosening drum Frame with drive and roller bearings for the bale loosening drum Comments: Documentation (operating instructions, CE declaration, electrical/hydrical circuit diagram) is not available and cannot be supplied. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: good (used), Year of construction: 2015, Year of manufacture 2015, serial number 413.00.032, pressing force 600 kN Njdpfxoxwc Naj Aa Eolk

Condition: used, Year of construction: 1995, power: 2 kW (2.72 HP), Vertical baler HSM 45 VL for SALE/RENT! Njdpfxox H Skbs Aa Eolk Manufacturer: HSM Model: 45 VL Year of manufacture: 1995 Total available: 8 units. Sale price: €1,200 per unit (ex works Lithuania)

Condition: good (used), Circuit breakers, motor protection switches, star-delta switches, reversing switches -Type: 3RV1421-1GA10 -Number: 17x switches available Nodpfx Aaob Nkuks Eelk -Price: per piece -Weight: 0.4 kg

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Nljdjra Nyuspfx Aa Eek Power (kW): 7.5 Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500