Used Bail Wrappers for sale (365)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) Fsdpfez Ipwcsx Ag Tsgi F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: used, Semi-Automatic & Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating Type: Semi-automatic & Fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA SERIES Production Speed: Up to 35 loads per hour. Load Capacity: Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Fgodpewb A N Rofx Ag Toi Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck to protect the turntable, 3-sided loading, and pit mounting. Forklift openings front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and anti-drop protection Automation Features: All-electric – No pneumatics required Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It offers significant productivity improvements and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting the stretch film offers the following advantages: • Selectable top wrapping function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are needed to power the turntable, reducing maintenance • The placement of the load on the turntable is not critical • No air connections or noisy compressors • New automatic load detection safety feature during the first rotation detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstacles • A-arm anti-drop protection Control Functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controllers for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or glossy loads Separate control for 1 to 12 wraps for upper and lower wrapping Selectable parameters for reduced film tension for top wrapping

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm Fgodpfx Ajz Iqp Teg Tsi ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, Year of construction: 2014, machine/vehicle number: FA60, Used ZELGA Shrink wrapper RZE 400 - 2014Technical Specifications & Performance DataThis automatic Shrink Wrapper from ZEGLA is designed for reliable secondary packaging of beverage containers, specifically aluminum cans. The model RZE 400 provides consistent bundle formation with neutral film, ensuring robust presentation and pallet stability for distribution. Built with industrial-grade components and a proven control platform, it is suitable for integration in a used bottling line or as a second hand upgrade to existing beverage production.Manufacturer: ZEGLAModel: RZE 400Year: 2014Machine category: Shrink WrapperContainer compatibility: Aluminum cansOperating type: AutomaticPLC/Control: Allen BradleyFilm type: Neutral filmElectrical supply: 440 V, 60 HzWeight: 1700 kgAdvanced Automation & Control SystemsThe machine is equipped with an Allen Bradley control architecture for dependable automation and straightforward diagnostics. Operators benefit from stable process control, precise temperature management within the shrink tunnel, and consistent infeed/outfeed synchronization for smooth bundle handling. The automatic operating mode reduces manual intervention while supporting repeatable format settings and efficient changeovers.Allen Bradley PLC for reliable control and integrationAutomatic sequence management for infeed, wrapping, and shrink tunnelStable temperature regulation for consistent film shrinkageOperator-friendly controls for setup and routine adjustmentsProduction Line Integration CapabilitiesEngineered for seamless inclusion within industrial packaging and beverage production environments, the ZEGLA RZE 400 can be positioned downstream of can filling and labeling equipment and upstream of palletizing systems. It supports integration with standard conveyor systems and typical accumulation solutions used in modern bottling equipment and packaging machinery.Compatible with upstream can filling and labeling processesDownstream-ready for case handling or palletizingSuitable for standalone use or full production line integrationDesigned for shrink-wrapping bundles with neutral filmMachine Condition & Maintenance HistoryThe unit is currently in storage and has seen less than one year of active operation. Its limited runtime and storage status make it a compelling option for producers seeking a second hand shrink wrapper with low wear. The overall presentation indicates careful handling and readiness for recommissioning in a used bottling line or packaging machinery layout.Operational status: In storageUsage: Less than 1 year in productionOperational Performance & VersatilityPurpose-built for can multipacks, the RZE 400 focuses on stable pack formation and consistent shrink quality with neutral film. This configuration supports beverage producers aiming to improve secondary packaging presentation... Fgsde Adyvhjpfx Ag Tji

Condition: used, Year of construction: 2012, machine/vehicle number: FA62, Used OCME VEGA HT 1002 shrink wrapperTechnical Specifications & Performance DataThis high-speed Shrink Wrapper is engineered for continuous industrial packaging on beverage production lines. Manufactured by Ocme, model HT 100/2, it delivers reliable bundling with film-only configurations across PET, glass, and aluminum containers. Designed for second hand and used bottling line integration, it supports demanding production schedules while maintaining consistent packaging quality.Manufacturer: OcmeModel: HT 100/2Year: 2012Maximum speed: up to 72,000 bottles/hour (line throughput)Container materials: PET, Glass, Aluminum (cans)Current bottle format: 0.33LMaximum container height: 250 mmMachine pitch: 380 mmPackage type: Film only (no tray)Number of lanes: 2Maximum film reel diameter: 500 mmNumber of film reels: 2Operator side: LeftWorking height: 1250 mmElectrical supply: 400 VInstalled power: 210 kWCompressed air: 6 barModel code: HT 100/2Advanced Automation & Control SystemsThe machine features robust automation for high-speed industrial packaging. A Siemens PLC and Siemens HMI provide intuitive control, diagnostics, and recipe handling for quick format adjustments. Automated film handling with dual-reel configuration ensures continuous operation and reduced changeover downtime. The two-lane infeed optimizes throughput and balances product flow for stable shrink-wrapping performance.Siemens PLC for reliable process controlSiemens HMI for operator interface and recipe managementQuick format setup for 0.33L and other compatible sizesDual film reel system for uninterrupted productionOperator-side ergonomics on the left for easy accessProduction Line Integration CapabilitiesEngineered to integrate seamlessly within a used bottling line or new industrial packaging layout, this Shrink Wrapper connects upstream with fillers and labeling machines and downstream with case handling, palletizers, or warehouse systems. It handles PET, glass, and aluminum containers in beverage production and supports flexible multi-format bundling with film-only packages.Inline operation with conveyors and accumulation systemsFilm-only bundle configurations for lightweight secondary packagingSuitable for water, CSD, beer, wine, milk, oil, and spirits applicationsAdaptable to multiple bottle sizes around 0.33L and beyond (within machine limits)Machine Condition & Maintenance HistoryThe unit has been overhauled and is guaranteed, ready for immediate operation. It is offered with compatible spare parts to support commissioning and initial operation phases, making it a strong second hand choice for high-speed beverage a... Fedpfs Adt Dlox Ag Tsgi

Condition: used, Semi-automatic pallet wrapping machine, stretch wrapping machine Design with a horseshoe-shaped rotating platform for easy loading with a pallet truck Semi-automatic pallet wrapping machine Manufacturer: Siat Type: HSD 312-S Model A 400 Volt / 50 Hz Year of manufacture: 2000 Pallet wrapping machine Capacity: 1200 kg Rotating platform: with fork recess Rotating platform diameter: 1500 mm Adjustable rotating speed of the rotating platform Motorized film pre-stretch adjustable to 100% or 200% Rotating table height: 75 mm Fsdpfxspygwqs Ag Tsgi Wrapping programs Program 1: Double wrapping with raising and lowering of the film carriage Program 2: Double wrapping with raising – pause for attaching the top cover of the pallet – and lowering of the film carriage Program 3: Simple wrapping with only raising of the film carriage Program 4: Simple wrapping with raising of the film carriage and pause for attaching the top cover Intended use Wrapping palletized loads with stretch film or netting pallet wrapping machine Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 pallet wrapping machine, stretch wrapping machine More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Fully automatic pallet wrapper with film pre-stretching Inventory No. 3974 Manufacturer: Matco Type: B 200 * Year of manufacture: 2016 * Turntable positioning via fixed stop * Number of bottom and top wrapping cycles * Turntable diameter: 2000 mm !!!! * Max. wrapping height: approx. 2700 mm !! * Own weight: approx. 550 kg * Very good condition Fgsdpfx Agjz Rq Rws Toi * Suitable for Euro pallets and block pallets!!! * Ramp

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Fedpfxoz Iqnvo Ag Tsgi Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process Fsdpfxjz Ir Haj Ag Tjgi ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. Fedpfx Agoz Irx Ns Togi ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end Fodpfx Aoz Irr Aeg Tsgi ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) Fgodpfxoz Iprte Ag Tsi F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: excellent (used), Year of construction: 2017, Redpack P325E flow wrapper in immaculate condition. Stainless steel model with programmable controls. Photo shows the machine before cleaning as it has been in storage for a while. Fgedpfx Aow Dyzveg Tsi

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other Fgodpsz Ipr Hefx Ag Tji F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001-549, TECHNICAL DETAILS Fgedpfxsz Agxij Ag Toi Stretch film Maximum film height: 500 mm Maximum roll diameter: 250 mm Core diameter: 76 mm Film thickness: 10–35 µm

Condition: good (used), Full Automatic filling and wrapping machine for mini hotel portions butter in aluminum foil or parchment paper. Product feed by hopper and agitator. Photo cell for print centring . No date coder. Outfeed conveyor of 85 cm. pack format: 40x30x9mm height adjustable, set for 10gr gram. Main motor 2,2 kW. Control panel with relay, operationel button controlled directly on machine. Outfeed conveyor with semi automatic packer (Benhil model: 8534). Pack size: 5x4x5 = 100 packs per carton box = 1 kg per carton box. Testmovie available. Fodpfx Agszhl Efo Togi

Year of construction: 2022, condition: ready for operation (used), A pallet wrapper with shrink hood OK-Pack is available. Pallet dimensions X/Y/Z: 1200mm/800mm/2000mm, max. pallet weight: 1500kg, machine dimensions X/Y/Z: approx. 2700mm/1800mm/2600mm, control system: Siemens PLC S7-1200/214C-KP300. Documentation available. An on-site inspection is possible. Fjdox Srpnspfx Ag Togi

Year of construction: 2012, condition: refurbished (used), Range: ø 10-32 mm, max. 40 m/min. Note: Core diameter 400-850 mm; outer diameter max. 1200 mm. Width 100-400 mm, many accessories available, automatic removal with conveyor belt. Fsdpfx Age Abbqns Tsgi

Condition: ready for operation (used), A fully automatic stretch film machine/stretch film line from the renowned manufacturer TOSA is now available. The machine is delivered complete with conveyor systems and is specially equipped for handling extra-large pallets. The system is designed in a U-shaped layout with recessed tracks at floor level, which allows for smooth loading and unloading using, for example, a hand truck or a stand-on stacker. Subsequently, the pallet is lifted and integrated into the rest of the conveyor system within the line. Fjdpfx Ae Ahzcfog Tsgi This solution is particularly well-suited for warehouse and logistics operations with high demands for flexibility and reliability. The rotating arm, in combination with several selectable wrapping programs, ensures stable and even wrapping of both heavy, light, and unstable pallet loads. Shipping and installation are additional costs. Model year: 2013 Total length of system: Approx. 13,500 mm Total width of system: Approx. 6,500 mm Height: 6,500 mm Minimum pallet size: 750 x 1200 mm Maximum pallet size: 1000 x 1350 mm Maximum wrapping height: 2,600 mm Maximum pallet weight: 2,000 kg Capacity: Up to 60 pallets/hour Power: 4.5 kW, Voltage: 380 V + N / 50 Hz Voltage: 380 V + N / 50 Hz Power: 4.5 kW Air consumption: 16.5 Nl/min

Year of construction: 2019, condition: excellent (used), Automatic pallet wrapper Film pre-stretching Inventory no. 3828 Manufacturer: Certis Type C-ONE * Year of manufacture: 2019 * Turntable positioning via Fix-Stop * Number of top and bottom wraps * Turntable diameter: 1650 mm * Max. wrapping height: approx. 2200 mm Fjdpfx Aezadbwjg Togi * Own weight: approx. 450 kg * Suitable for Euro pallets and block pallets!!! * In very good condition

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Fgedpfx Asz Iqtfjg Tei Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Fedpfx Agjxwyvqs Tegi

Year of construction: 2001, condition: excellent (used), PFM Flow wrapper Model: Tornado-BBLDSS Fodpfx Aohr D Uveg Tsgi Serial: C-6096 2001, Stainless, The Tornado LD is a horizontal flowrapping machine that produces up to 100 packs/min with hermetic seals from a flat reel of heat seal wrapping material. The Tornado LD is specifically designed for “M.A.P.” (Modified Atmosphere Packaging). with smartdate X40 coder, infeed length 2400mm, flow wrapper length 3200mm, jaw width 220mm, various belt for infeed, 3Ph

Condition: good (used), Pallet wrapping machine, stretch wrapper for pallets, special version for use with manual pallet trucks – used: Price ex works: €4,750 (net), including loading! Very robust machine! Type HAD 1500NH Year of manufacture: 2012 No. 274 with the following standard features: 2 programs (normal and cross wrapping) Photo cell (can be switched on and off) Freely selectable bottom and top wrapping Mechanical film brake Soft start of the turntable Adjustable film inclination, max. pallet height 2200mm Fjdoz Sfaqjpfx Ag Togi Turntable diameter 1500mm Programmable turntable speed Safety light barrier on the open turntable Condition: very good Available: immediately Location: 91177 Thalmässing Photo is similar:

Condition: excellent (used), Stainless steel flow wrapper in almost new condition. Touchscreen model. Fsdpfetux N Hex Ag Tsgi