Used Automatic Spray Machine for sale (77,509)

Condition: excellent (used), Otto Kremmling type oka Automata 600/7 Marzipan depositing and forming of soft mass. 25 kg blocks of Marzipan are put in squeezed through the roller and into the dies forms then goes into cooling system. Lrodpfx Asylbz Sebysu

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp Lrsdpszu Ryhofx Abyju • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: used, Ceever Spraymaster Turning Spray Washing System The Spraymaster series of industrial washing systems offers advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4,000 kg. Thanks to a rotary table, which enables uniform wetting of the components with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles allows for complete spray cleaning of all surfaces, thereby optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No.: Z 429 Load: 500 kg/batch Voltage: 380 volts Ledpjx Ex Nzefx Abysru Current consumption: 90 A Connected load: 62 kW More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Schaal Type: SEP32 Year of Manufacture: 1980 Machine Type: Punching Machine Press Data Press Force: 32 t Stroke: 8–70 mm Flywheel Diameter: 660 mm Speed: 80–400 RPM MACHINE DETAILS Dimensions Length: 1,500 mm Width: 1,200 mm Lrjdpfe Adu S Rsx Abyeu Height: 2,500 mm Weight Machine Weight: 3,000 kg

Condition: good (used), Superfax PF-460 Automatic Folding Machine Made in Japan. Perfect condition, ready to use. This model is very well-equipped, with automatic cassette adjustment, automatic paper size detection, and an automatic feeder. Technical data: Paper size: min: 91×128 mm max: 315×432 mm A6-A3 Weight: 45-160g (max. up to 230g when half-folding) Power supply: 230V Weight: 34kg Detailed specifications: Lrsdpfez Rk I Nex Abyou – Automatic folding position setting for the six most popular folds (half-fold, quarter-fold, „Z”, „C”, „altar” fold) – Automatic paper size recognition for six formats (A3, B4, A4, B5, A5, B6) Paper folding speed adjustable from 3,300 to 10,000 sheets per hour Shelf for folded documents Automatic paper feeding system Smooth paper flow thanks to the conveyor belt Folding counter, batch countdown, total count, etc. Automatic stop with a sound signal when all sheets are folded A complex paper jam is signaled by an appropriate sound and a LED indicator.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Automatic strapping machine, Mosca, SoniXs-TR6 Pro – used: Price ex-works: only €17,500.00 (net) ex-works! Manufacturer: Mosca Type: SoniXs-TR6 Pro Year of manufacture: 2020 Machine number: 119645 With two rolls – the machine switches automatically when one roll is empty The machine is currently operating with 12 mm wide strapping band Designation: pp-120-055-bl/-1-g-200-2500 Lodpfxjzpf Shs Abyeru Material: Polypropylene (PP) / Band width: 12.0 mm / Band thickness: 0.55 mm / Tensile strength: 120 kg / Core diameter: 200 mm / Run time/length: 2500 m Former new price: €36,461.00 1L+N+PE, 50-60Hz, 100-240V, 3.00 - 1.25 A, max. 16 A Price includes a partially used pallet of strapping band (see photo) and a small spare parts kit! Condition: good, used sparingly Available: immediately Location: Duderstadt

Condition: good (used), Year of construction: 2005, functionality: fully functional, Used, well-maintained, fully automatic band saw machine "JAESPA", model: Comfort 260A Cutting range for round/square/rectangular materials: 260/260/320 x 200 mm Band speed: 15-100 m/min, continuously adjustable via frequency inverter Hydraulic feed, continuously adjustable Lrsdjz Tdk Aspfx Abyju Feed roller length: 2000 mm Band dimensions: 3660 x 27 x 0.9 mm Technical data and dimensions: Subject to change without notice.

Condition: good (used), CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Sheet feeding is manual, while the machine handles the rest automatically. An automatic feeder can also be added (optional). Parameters are set from the control panel and jobs can be saved to the machine’s memory. Materials processed range from 200 GSM to 4 mm cardboard. Sturdy construction, weighs 750 kg. Adjustable creasing and counter-creasing widths. Stepper motor control. Ledozw Typspfx Abyeru Fast operation, up to 2400 sheets/hour. Sheet size: 750 x 1400 mm. Two sheet guides with an extended table and pressure rollers. Quick machine format conversion in less than 1 minute. Receiving table included.

Condition: good (used), Year of construction: 2001, Semi-automatic Bomar STG 330 DGH saw Ledezur Duepfx Abyjru - Cutting dimensions: 330mm x 510mm - 60-degree mitre cut - Variable cutting speed - Year of manufacture: 2001

Year of construction: 2019, operating hours: 50 h, condition: excellent (used), functionality: fully functional, workpiece length (max.): 40 mm, No minimum price – guaranteed sale to the highest bidder! Unit with only 50 operating hours! The new price was €280,000! Currently, the unit is only partially operational, as it is not currently connected to the cooling system. TECHNICAL DETAILS Component types: Screws and bolts M8 and M10 Process: Automatic inductive hardening Throughput: approx. 70–80 parts/min Processable screw length: 25 - 40 mm MACHINE DETAILS Automation and feeding Feeding: Hopper conveyor Conveying technology: Inclined conveyor Sorting: Linear sorter Singulation: Automatic Indexing table: 8-position Nests per station: 2 Quenching medium: Water Quenching water tank: Present Lrodpfx Abjzmwcasysu Discharge: Magnetic discharge conveyor Demagnetization: Present Quenching medium filtration: Cartridge filter Cooling: Prepared for connection to a central cooling system RF generator manufacturer: IDEA Heating power: 50 kW Power: 67.98 hp EQUIPMENT Hopper conveyor Inclined conveyor Linear sorter 8-position indexing table with 2 nests per station IDEA RF generator Quenching water tank Magnetic discharge conveyor Demagnetization unit Cartridge filter Temperature monitoring Component height monitoring Component type monitoring Rotation monitoring Energy monitoring Ground fault monitoring Inductor flow monitoring Inductor water temperature monitoring

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ljdpfx Abjzrwzaeyoru Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Ljdozrwypepfx Abysru Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine The most efficient machine on the market from a legendary manufacturer. This advanced machine boasts high performance thanks to an external heating thermostat. Made in Great Britain. Technical specifications: Max sheet size: 1060mm x 1060mm Min sheet size: 320mm x 285mm Min grammage: 115 gsm Max grammage: 650 gsm Lredpfxezz Hfys Abyeu Operating temperature: 80-135°C Max operating speed: 120m/min Weight: approx. 4500 kg 380V power supply Additional 8 bar air supply Large-diameter, chrome-plated steel cylinder, filled with water for greater stability. Double-sided laminating Pneumatic clamping, separation, and automatic feeding. Adjustable pressure. High-stack feeding, Heidelberg Speedmaster feed head. Expansion roller for film fixing. Sheet straightening module. Stacker for sheet removal. The machine can operate in pallet-to-pallet or pallet-to-roll configurations. Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers.

Condition: excellent (used), functionality: fully functional, Blum's dimensions head pneumatic pressure of material pneumatic movement of head linears with blocks linears length 1,75m Lrodpsy N Rgajfx Abyou table with rolls 50cm motor power 1,5kW drilling depth regulation pedal control year 2009

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Lsdpfoy Ndyaox Abyjru Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: new, functionality: fully functional, overall weight: 650 kg, The Japa® 315+ with electric drive offers a wide range of functions and high capacity in a compact, mobile unit. We have increased the capacity – the maximum wood diameter is now 31 cm, and the length is 50 cm. Technical specifications: Log diameter: 310 mm Splitting force: 5.6 tons Splitting wedge: 4-way Log length: up to 50 cm Oil capacity: 30 l Motor output S1: 4 kW / 400V Weight: 600 kg Dimensions: 4060 x 1330 x 2580 mm Original photos & honest descriptions. Shipping available upon agreement. Fair prices. Lrodoxx Szhepfx Abysu Price for basic version, demonstration model – optional equipment extra. ❓If you have any questions, please don't hesitate to contact us – we will respond quickly and courteously!

Condition: used, Vollmer Junior B automatic band saw blade sharpener for sharpening band saw blades. Ledpfjzrx Hwox Abyeru Technical data: - Technical specifications: On request

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Lsdjz Dta Tjpfx Abyeru Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: used, Year of construction: 1997, functionality: fully functional, Used AUTOMATIC STRAPPING MACHINE FOR PACKAGING LINE WITH MOTORIZED ROLLERS, ROBOPAK BRIDGE 750 TP-601B. Ledpfx Abozhufbjysru

Condition: used, Semi-Automatic & Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating Type: Semi-automatic & Fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA SERIES Production Speed: Up to 35 loads per hour. Load Capacity: Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck to protect the turntable, 3-sided loading, and pit mounting. Forklift openings front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and anti-drop protection Automation Features: All-electric – No pneumatics required Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It offers significant productivity improvements and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting the stretch film offers the following advantages: • Selectable top wrapping function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are needed to power the turntable, reducing maintenance • The placement of the load on the turntable is not critical • No air connections or noisy compressors • New automatic load detection safety feature during the first rotation detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstacles • A-arm anti-drop protection Lredpfxewb A N Rj Abyeu Control Functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controllers for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or glossy loads Separate control for 1 to 12 wraps for upper and lower wrapping Selectable parameters for reduced film tension for top wrapping

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Ledpfx Abew H Naaeyoru Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: excellent (used), I am offering a SANPACK FIX pallet wrapping machine designed for securing loads with stretch film during storage and transport. Technical specifications: Manufacturer: Sanpack Model: SANPACK FIX Lrsdpsz Sm Ngefx Abyou Power supply: 3×380V + N + PE Frequency: 50 Hz Power: 0.55 kW Rated current: 2.0 A Protection rating: IP54 Advantages: Rotating pallet table Stretch film holder Robust industrial construction Control panel operation Ideal for warehouses, production facilities, and logistics centers Visual condition matches the photos. The machine is used.

Condition: used, The Weinig Unimat 23 SP automatic planing and splitting machine is designed for the precise planing or pre-planing and splitting of solid timber in a single operation. With four spindles, a working width of 230 mm and a working height of 120 mm, the machine is suitable for efficient processing in the timber industry. Technical data: - Spindles: 4 Lodpfx Abjzrxywsyoru - Working width: 230 mm - Working height: 120 mm - Spindle 1: Bottom (5.5 kW) - Spindle 2: Top (5.5 kW) - Spindle 3: Right (11 kW) - Spindle 4: Left (11 kW) - Feed: 5.5 kW

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. Lrodpfx Asy I Tq Ssbysu All equipment is connected and can be inspected in operation to see the full production process.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: A1106011/1300, working width: 1,300 mm, overall weight: 7,500 kg, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. working width: 1,300 mm Max. workpiece thickness: 120 mm MACHINE DETAILS Lodpfxszzbcge Abyjru Voltage: 400 V Current consumption: 36 A Fuse rating: 63 A Connected load: 17.0 kW Weight: 7,500 kg Transport weight: 7,500 kg Number of transport packages: 8 units EQUIPMENT 4 spray guns Wagner pump system