Used Automatic Saw for sale (27,002)

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm Bsdpfohfufgsx Abbedk -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, Year of construction: 2006, Description Brand: H&M Type: HM-Z/4 F Year of manufacture: 2006 Feed length: 8500 mm Industrial PC. Saw blade diameter: 700 mm Bodpfxswzkyqo Abbedk Angle adjustment: 0-180º Tilting angle: 0-45º Z-axis adjustment: 200 mm Maximum cutting height: 250 mm Discharge system with pushers

Condition: used, Year of construction: 1985, cutting diameter 340 mm dimensions of saw-blade 4860 x 32 x 1,1 mm cutting range square 340 x 340 mm cutting speed 17 - 120 m/min drive motor 4 kW weight of the machine ca. 2,5 t dimensions ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Digital display of the dimension preselection Constant, hydraulic clamping of the carbide band guides Bdodpfx Abjwyfa Asbok

Condition: good (used), Year of construction: 2022, I sell the automatic pneumatic end cutting saw Salvamac Salvapush 2000, year 2022. Bdedpfjvxbmwsx Abbok Input table automatic feeding 6,10m (pusher system) Outut table 3,00m Total length: 10,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Increase your productivity with this complete automatic drill-saw street for profiles. Bdjdpfx Astnf Iysbbok Designed to work efficiently and accurately with different profile steel materials. Price does not include disassembly, assembly, transportation and import duties. Please contact us for more information about this machine.

Condition: used, Year of construction: 2000, cutting diameter 280 mm saw band length 4930 mm capacity 90 degrees: square 280 x 280 mm capacity 45 degrees: round 280 mm capacity 45 degrees: square 280 x 280 mm capacity 60 degrees: round 220 mm capacity 60 degrees: square 200 x 200 mm feed length 600 mm feed length: multiple 5400 mm cutting speed 17 - 90 m/min length of rest piece min/max min. 30 mm saw diameter min. 10 mm control KASTO, Compact Control total power requirement 5 kW weight of the machine ca. 1,75 t dimensions of machine L x W x H 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width; Bedpfx Aow En Efobbodk roller track 1350 mm length, 300 mm width

Condition: ready for operation (used), Technical characteristics Bdsdper A Ulkefx Abbok Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: used, Year of construction: 2003, Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, automatic band saw, automatic metal band saw Bdodsh Ra Hkopfx Abbsk -Manufacturer: DoAll, horizontal band saw automatic band saw type C-916A -Cutting data flat: approx. 410 x 230 mm -Cutting data round: approx. 230 mm -Cutting data square: approx. 230 mm -Saw band speed: continuously adjustable, 15 - 120 m/min -Motor power: 3 KW -Saw band: approx. 4014 mm -Coolant system: available -Dimensions: 2080/1400/H1390 mm -Weight: 670kg

Condition: new, 1 brand-new semi-automatic high-performance horizontal bandsawing machine with double column guidance and 2° cutting inclination to the table support surface Make: HUVEMA / BEKA-MAK, Origin Turkey Model: BMSY 330 C Technical data: Sawing capacity 90° round 330 mm Sawing capacity 90° rectangular 360 x 330 mm Sawing capacity 90° square 330 mm Sawing capacity 45° round approx. 250 mm Sawing capacity 45° rectangular approx. 250 x 325 mm Sawing capacity 45° square approx. 250 mm Size of the saw blade 5000 x 34 x1,1 mm Infinitely variable band speed 20 - 100 rpm. working height 635 mm Engine power 3 kW hydraulic motor 0,55 kW Dimensions L x W x H 2830 x 920 x 1630 mm Machine weight 1030 kg Accessories / Special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to the table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel Bdjdpfx Aofk Eu Njbbek - CE conform Delivery time: approx. 8 weeks after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: good (used), Year of construction: 2007, I sell the automatic pneumatic end cutting saw OMGA T521, year 2007. Input table automatic feeding 5,10m (pusher system) Outut table 1,50m Total length: 8,00m Bjdpfx Abovxu Rpsbjdk Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Bodpfx Aovtrkijbbjdk Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm cutting width 350 mm Control NC 5.0 band speed 15 - 100 m/min capacity 0 degrees: round 350 mm capacity 0 degrees: square 350 x 350 mm table height 860 mm total power requirement 4 kW weight of the machine ca. 2,8 t Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column for 0 ° cuts on solid material and profiles made of steel, stainless steel and Bodpfxowu Hhdo Abbsdk steel alloys up to a maximum of 350x350 mm. The standard equipment includes: - Driven chip conveyor, can be installed on the right or left of the machine - Clamping pressure regulation of the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw machines, which can also be operated semi- automatically, with the new MEP 50, specially developed by MEP for automatic machines, Windows "CE" based control. Cutting cycle “clean cut” The feeder pushes the workpiece backwards in order to avoid scoring at the cutting surface when the belt moves up again at the end of the cut. - Fieldbus communication system with double microprocessor and serial connection. - The user interface with 7 ”touch screen display and mechanical keys are used for the operating functions of the sawmasc ins, guarantees a reliable, simple and intuitive use, as well as a real-time control of all cutting parameters standard equipment - Shark 350 NC Machine is immediately available from stock, subject to prior sale

Condition: ready for operation (used), Technical characteristics Bsdpfx Asraduasbbodk blade Ø 450 mm, 4 kW Capacity 25 x 330 mm, 50 x 300 mm, 100 x 250 mm Useful cutting length 6000 mm, 90 m/min Lifting fence with detection part MATRIX 3 PLUS POWER 1000 control Data management and USB port for cutting list import Outfeed table 3 m Cutting of wooden tiles, packaging, pallets, rafters, lumber Power and Motors Overall dimensions

Condition: used, Year of construction: 1995, cutting diameter 260 mm saw band length 3830 x 27 x 0,9 mm cutting range flat 310 x 260 mm cutting range square 260 x 260 mm cutting speed stufenlos 19-110 m/min feed length 750 mm multiple feeding length 6750 mm Bsdpfxjwhqxms Abbedk height of material-table 700 mm weight of the machine ca. 1,4 t dimensions ca. 2100x2300x1720/1300 mm incl. several band saw blades incl. chip conveyor

Year of construction: 2019, condition: excellent (used), Westphal Mechanik C7x Commutator Slotting Centre Machine No. M64127 Year of manufacture: 09/2019 Bdsdpfx Absg H Inzjbek The commutator slotting centre has four machining steps. The following components are approached in the steps: Contact slitting saw Insulating grooving saw Deburrer Brush The Stäubli TS 80 robot with SP1 control has two grippers that pass the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer  Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC  More pictures via this link. Further technical data will follow shortly.  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m 5 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. Bdsdpfx Asppwx Eebbok CE version. Documentation included.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 16700 € 320.64 € Schwenkrahmen 4800x34x1,1 mm 15 - 120 m/min 360 mm 360 mm 510x360 mm rund 360 mm, quadrat 360 rund 250 mm, quadrat 220 rund 280 mm, quadrat 260 860 mm 0.37 kW 3 kW 0.12 kW 2650 mm 1210 mm 1870 mm 1450 kg Hydraulic vice Inverter for contious variable band speed Continuously adjustable saw arm lowering speed Hydromechanical blade tension can be read via pressure gauge Control panel Chip brush Coolant equipment Operating instructions in German or English Bedew Np N Eepfx Abbedk

Condition: ready for operation (used), Technical characteristics Description : SELCO panel saw TYPE EBTR 120 Twin Pusher - 5600 x 2200 mm Numerical panel saw, with two independent automatic loading stations and electromechanical precision lifting table Principal technical characteristics Max cutting length : 5600 mm Max auxiliar pusher course : 4300 mm Max blade height from table level : 122 mm Max clamps opening : 110 mm Lifting table with direct loading : 5600 x 2200 mm Min panel dimension on loading position : 2440 x 1220 mm Min panel thickness from loading table : 10 mm Main blade motor 18,5 kW / 50Hz (25 Hp) Incisor blade motor 2,2 kW / 50 Hz (3 Hp) Brushless motor for blade chariot - Speed 1 -150 m/min Brushless motor for main pusher – Max speed 100 m/min 2 back rollers lateral alignment device with automatic positioning (60 mm to 2200 mm) Turning platform for automatic pre-cuts with 4 pile blocking device Auxiliar pusher TWIN PUSHER Main blade Ø 430 mm Incisor blade Ø 200 mm 4 pneumatical clamps with independent lifting in the transversal area for main pusher (placed at 70, 180, 390, 600 mm from the squaring line) 4 pneumatical clamps with independent lifting in the longitudinal area for main pusher (placed at 2235, 3845, 4650, 5450 mm from the squaring line) 4 pneumatical clamps with independent lifting in the auxiliar pusher (placed at 70, 180, 390, 600 mm from the squaring line) Air cushion rounded work plan 2050 x 850 mm for width optimization placement allowing simultaneous transversal cutting of several bands 4 air cushion tables 4 front transversal pre-aligning devices direct on the pile turning station 2 front and longitudinal pile aligning devices after the rotation Lifting loading table Bsdpfx Abjucitnobjdk Auxiliar pusher for simultaneous different cutting phases, synchronized with main pusher The 2 pusher are managed by a software, which depending on the cutting instructions, selects the clamps of different pushers so that the insertion in the cutting zone is optimized to realize as many simultaneous cuts as possible The auxiliar pusher has 4 independent clamps and can be equipped with a fifth one (option). Automatic cut panels evacuation Heavy single structure, Industrial chassis, strong stability Cemented and calibrated chariot guiding rails, which supports the main blade and the incisor blade Les 2 pousseurs sont gérés par un logiciel qui, en fonction du schéma de découpe et des phases d'usinage nécessaires, sélectionne les pinces des divers pousseurs à Insérer dans la zone d'usinage afin de réaliser le plus grand nombre possible de cycles de découpe simultanés. Expulsion automatique des panneaux coupés Pressor group Lateral alignment group with 2 independent rollers The turning station has a lifting platform turning the panel pile at 90° which is held in place with blocking devices. The pile is then aligned by the front devices When the pre-cutting cycle is over the main part of the pile is returned again at 90° on the turning station, and the pre-cut part is sent to the transversal cutting operation PC Windows XP, 17" screen With cutting profiles, lists, manual cutting, simulation, diagnostic, online help, maintenance, statistics and settings Software and applicancies: "OPTIPLANNING" Pro Version software : Great number of cutting lists (including different types of material) allowing “all at once” optimization "IMPORT FILE" function Editing on external device and import files on machine PC. Automatic management of panel piles and waste material Panel stock and

Year of construction: 2003, condition: used, cutting capacity - round 300 mm dimensions of saw-band 3320 x 27 x 0,9 mm Bsdjra Rrlepfx Abbjdk cutting capacity - flat 330 x 260 mm cutting capacity - square 260 mm Control evolution work height max. 870 mm 40 / 80 mt/min weight of the machine ca. 1050 kg

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 33700 € 643.67 € Doppelsäulenführung 6300 x 41 x 1,3 mm 15 - 120 m/min 440 mm 440 mm 640 x 440 mm rund 440 mm, rechteck 400 rund 250 mm, rechteck 250 rund 390 mm, rechteck 390 Bsdpfx Abowirzlebjdk 860 mm 1.1 kW 4 kW 0.12 kW 3150 mm 1850 mm 2115 mm 2050 kg 3° inclined sawing band blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way height adjustment pressure adjustment coolant pump saw blade security switch gearbox syncronized movement of sawing arm/clamping jaw hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH ALTERNATIV: Version BMSY 440 CDGH NC with automatic mitre adjustment by NC control

Condition: ready for operation (used), Technical characteristics Numerical control pusher with defect reader and cutting optimization The defect is detected by a camera which identifies a mark made with fluorescent chalk Pusher carriage with advancement speed 60/230 m/min with Brushless motor Useful stroke from 500 mm to 6100 mm Bdodpfx Aet Hncqebbsk Group of 6 chains for the loading and the approach of the boards Pneumatic lifting Capacity 50 kg per meter Variable distance between centres, length of chains 1200 mm Automatic crosscut saw TRV1700 P 500 Vertical pneumatic press Advancement from right to left Cutting time adjustable from 0.1 to 1 s Thickness of boards min 10 mm, max 120 mm Board width min 30 mm, max 300 mm Blade motor HP 5.5 and automatic braking Discharge belt Pneumatic ejector selector Max weight of the board 15 kg Length of the piece to be ejected min 200 mm, max 500 mm Numerical control sorting belt With NC ejector Fixed speed 50m/min Chain transfer inclined discharge/side load Inclination max 15° (= height 120 mm, length 1000 mm) Center distance 2500 mm, chain length 1600 mm Discharge belt Motor 0.5 HP Fixed speed 50 m/min Length 3000 mm x depth 400 mm x height 900 mm Conveyor belt for the discharge of inclined cuts 45° inclined waste discharge belt with blind h 40 mm, pitch 300 mm Speed 8m/min Lifting height from 500 mm to 1900 mm Data transmission to PC Transmission mode via USB stick, RS232 cable Power and Motors Pluging: Three-phased Overall dimensions

Condition: new, neu 060027 prompt, Zwischenverkauf v Türkei 7000 € 135.1 € 1 Schwenkrahmen 2730x27x0,9 mm 35/70 m/min 230 mm 230 mm 320x130 mm rund 210 mm, quadrat 190 rund 130 mm, quadrat 100 rund 180 mm, quadrat 150 805 mm 0.37 kW 1.3 kW 0.12 kW 1350 mm 700 mm Bjdpfxswirybe Abbedk 1300 mm 430 kg swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame mechanical vice with quick clamping coolant equipment machine base chip collecting tray user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: ready for operation (used), Technical characteristics cut of MDF WOOD and PVC molding at 45 ° double horizontal blades inside rake angle Largeur de coupe130 mm Hauteur de coupe100 mm Diamètre lame300 mm Power and Motors Bedpeuaihmefx Abbodk Overall dimensions Lenght: 1400 mm Width: 1600 mm Weight: 500 Kg

Condition: new, neu 060028 prompt, Zwischenverkauf v Türkei 9210 € 177.75 € 1 Schwenkrahmen 3160x27x0,9 mm 20-100 m/min 270 mm 270 mm 340x220 mm rund 230 mm, quadratisch rund 150 mm, quadratisch rund 180 mm, quadratisch 910 mm 0.37 kW 1.5 kW 0.12 kW 1730 mm 770 mm 1460 mm 476 kg DIGITAL ANGLE READ OUT blade brush control panel Bedpfx Abswirktjbedk swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: ready for operation (used), Technical characteristics Bdedpfx Ajrmgm Debbjk Blade Ø 800 mm Motor 10 HP Motorized feed of the cutting plane 400 mm Rotation vertical axis 180°. Infeed table length 6000 mm Motorized stop 7000 mm long on the right Roller table with wood feed by lower rollers and cylinders for alignment Vertical pneumatic pressers Two-hand control Power and Motors Voltage: 380 V Pluging: Three-phased Power: 8 Kw Motor: 10,5 CV Overall dimensions Weight: 1200 Kg