Used Automatic Flute Laminator for sale (20,946)

Year of construction: 2003, condition: used, functionality: fully functional, D&K Acculam 2760 Laminator with Feeder, Exit tray and Transformer. Recently removed from a printshop. Machine has been in full working order and producing live jobs. Machine is sold Ex works. No cutting unit is included. Machine is located in my warehouse in Tadley/Reading UK. Video in production on request. Ihjdpfxex Nawno Ag Ust The D&K System 2760 (often referred to as the Acculam series) is a fully automated one-sided lamination system designed for high-volume, short-run digital and offset printing. It typically includes an automatic feeder, a laminator with curl management, and a flying knife separator. Technical Specifications Max Lamination Speed Up to 60 fpm (18 meters per minute) Max Sheet Size 26" x 30" (standard) or up to 28" x 40" (B1 version) Min Sheet Size 8.5" x 11" (21.6 cm x 27.9 cm) Paper Weight Range 80 lb. Text to 18 pt. Board (approx. 115–350+ gsm) Temperature Range 180°F – 300°F (70°C – 140°C) Warm-up Time Approximately 20 minutes Electrical Requirements 230 Volt, 30 Amp, Single Phase Air Requirements 6 cfm (some models may require up to 8 cfm) System Dimensions 5' W x 14' L x 5' H Key Features Feeding System: Utilizes a state-of-the-art automatic suction feeder and belt table to ensure accurate sheet registration. Adhesion Technology: The System 2760 DN variant features two sets of heated nip rollers specifically for better adhesion to difficult digital prints like Xerox iGen or HP Indigo. Curl Management: A patented decurling system ensures sheets lay flat even when using thin paper or thick films like polyester and nylon. Versatility: Supports both thermal (heat) and pressure-sensitive (cold) lamination with optional release liner take-up for PSA products.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9012, total height: 4,200 mm, ram adjustment: 100 mm, installation height: 630 mm, total width: 5,100 mm, total length: 2,000 mm, pressing force: 400 t, stroke adjustment: 2,080 mm, clearance between the columns: 3,000 mm, overall weight: 65,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 400 t, The machine is partially overhauled and completed. The control system is built according to customer requirements (Siemens control). Delivery time is approximately 3–4 months after configuration of the new control system based on the customer’s specifications. Ihjdpfsx U Ur Rjx Ag Ujt

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 18,300 mm, feed length Y-axis: 1,000 mm, total length: 20,500 mm, drilling capacity: 50 mm, total height: 2,560 mm, total width: 3,500 mm, quill stroke: 330 mm, workpiece weight (max.): 1,088 kg, table width: 1,000 mm, table length: 18,300 mm, 2005 Peddinghaus Avenger MDL1000/B CNC Beam Drilling Line Machine Type: Single Spindle CNC Beam Drilling Line Control: Siemens Sinumerik Year: 2005 Condition: Good. Can be viewed running Includes 60ft Table Technical Specification Max Beam Size: 60ft x 40" (18.3m x 1000mm) Max Beam Weight: 730lbs/ft (1088kg/m) Min Drill Diameter: 1/4" (6.5mm) Max Drill Diameter: 2" (50mm) Max Thickness: Up to 10" (250mm) Max Speed X-axis: 120 ft/min (37m/min.) Max Speed Y-axis: 120 ft/min (37m/min.) Isdpfx Aju Nyg Usg Ujht Spindle Power: 13 3/4hp (10KW) Drilling Feed Rate: 2" – 10" per min (50-254mm/min) infinitely variable Spindle Stroke: 13" (330mm) max Total power: 20 HP (14.9 KW) Power Supply: 400V, 3-ph, 50 Hz Average Output: 200 to 400 holes per hour depending on the profile drilled Approx Floor Space Required: 20.5 x 3.5m Machine Height: 2.56m

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P Ihsdpfowu Ahgex Ag Ujt

Condition: excellent (used), Year of construction: 2018, Control Fanuc 32I-B, Isdpfxjw Rct He Ag Ueht bar capacity 32mm, maximum cutting diameter 32mm, maximum cutting length 310mm, maximum drilling diameter 13mm, maximum tapping capacity M12, milling speed 5,000rpm, spindle speed 7,000rpm, Sub spindle C axis 0.001 degree, FMB Turbo 3-36/3200 barfeed, number of controlled axis Z, ZB, X, XB, C1, C2, Y. swarf conveyor,

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 1.321,00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 22.00 euros 12 mm brackets (package of 3000 pieces): Price 32.00 euros 10 mm staples (package of 3000 pieces): Price 32.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg Isdpfxovnh T No Ag Ueht All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: used, Year of construction: 2009, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 36,000 rpm, GF Mirkon XSM600U X: 800 Y: 600 Z: 500 A: +30/-100 degrees C: 360 degrees continuous HSK50 spindle: max. 36,000 rpm, 25 kW HR410 handwheel 60-station tool changer Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar internal coolant supply Blum laser tool measurement M&H 3D probe Pallet automation with 21 pallets - the pallets are not included in the scope of delivery Ihodpfx Ajwa R A Neg Ust This machine is offered on a customer order basis!

Condition: used, Automatic Platen Die Cutter ETERNA ML 930 GII with 3 Operation modes Isdpfsx U Adnsx Ag Ueht Halbautomatischer Stanztiegel / Automatic Platen Die Cutter ETERNA ML 930 GII Year 2008 - Serial-No. EP51568 Format 670 x 930mm Operating modes: Single, Continuous nd with time delay on opening Electromagnetic clutch and brake Included frame and tools, in very good condition Safty Cover Weight 3800kgs - Power supply 380 V Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Iodev Er Niepfx Ag Uoht Photos Available on your email or Mobile Phone WhatsApp.

Condition: refurbished (used), Automatic cutting-off machine RAWYLER AWT-5 fully revised with new electrical cabinet SIEMENS. Ihjdpfxsx Tcuqo Ag Ust Variation spindle speed and cam Several machines in revision.

Condition: used, mileage: 32,891 km, power: 110 kW (149.56 HP), first registration: 12/2022, fuel type: diesel, tire size: 215/65 R16C, axle configuration: 4x2, wheelbase: 3,150 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, suspension: steel, total length: 5,200 mm, total width: 1,950 mm, total height: 1,970 mm, Year of construction: 2022, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, trailer coupling, = Additional options and accessories = - Spare key - Speed limiter - Reversing camera - Stability control - Standard air conditioning - Alternating current - Central lubrication = Further information = Tyre size: 215/65 R16C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; tyre tread left: 5 mm; tyre tread right: 5 mm Rear axle: tyre tread left: 8 mm; tyre tread right: 7 mm Unladen weight: 1,887 kg Payload: 913 kg GVW: 2,800 kg Ihsdsx Rl Diepfx Ag Ujt Damage: none

Condition: excellent (used), Year of construction: 2012, Ref:11026 . 2012 Aster 220 SA Automatic Book Sewer The 220 is the top model in the Aster range. The fastest and most automated sewing machine suitable for both short & long runs. Equipped with: Aster 220 SA Automatic book sewer with; 4 plus 4 upper and lower openings Suction and gripper action Computer programme - Siemens PLC with icon display and job memory capability Moveable touch-screen colour monitor Auto set-up with servo motors Ihjdpsxx Ut Tsfx Ag Ust Programming of lap opening & suckers D/C drive unit Capable of mixed suction & lap signature feeding Standard or staggered stitching - adjustable Thread cutting device Meccanotecnica 'Plus' Stacker Delivery conveyor Specification: Book sizes, Max: 510 x 320 x 100 mm Min: 150 x 75 x 5 mm Stitch length 19 mm Number of stitches 11 Mechanical speed 220 cycles/min.

Condition: used, Year of construction: 2007, Behringer HBM 540 A automatic band saw year of construction 2007 Working area flat 630x540 Ihodpfewi Ii Sjx Ag Uot Round 540mm Motor power saw drive 11KW Cutting speed 20-200m/min 2x infeed roller conveyor driven 6200mm width 1200mm each with cross feed Discharge roller conveyor 5030mm driven chip conveyor The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals

Condition: used, Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 Halb-automatische Winkeleinschweißmaschine / Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 Year 2005 - Serial-No. KN 070192 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Shrinking tunnel with conveyor Film carriage on rails Dimensions of tunnel arc 544 x 387 x H 190mm Overall dimensions 1900 x 900 x Ht 1300mm Sehr guter Zustand - TOP Condition Iodox Ux D Ropfx Ag Ujht Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Ihodpfx Agstzyx To Ujt Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: used, STAR SW 20 is a CNC automatic (Swiss-type) lathe offering high precision, strong accuracy and reliable performance. Capacities: 11 axes, 2 spindles, max machining Ø 20 mm, back spindle up to 10,000 t/min. Specs: spindle 3.7 kW, driven tools 1.2 kW (8,000 t/min), carriages with 7 and 5 positions, counter-operation 8 tools (6 driven), rapid traverse 35 m/min, 50 Hz 3x380 V, ~3400 kg, L2600×W1150×H1765 mm. Accessories: bar loader, lamp, 150 l coolant system, ELBARON oil-mist extractor, interface for bar loader. Achieves tight tolerances; typical uses: automotive, watchmaking, tooling, aerospace, medical. Iedpox S N Sysfx Ag Ueht

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Model - 8-1 (8 x filling heads). Serial number - 013368. Date of manufacture - 2019. Isdpfoulpu Sox Ag Ueht Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: good (used), Year of construction: 2008, Maier ML125 Linear Year of manufacture: 2008 Ihsdpfx Agjx Stdts Uet Fanuc control FMB Minimag 18 bar feeder magazine Hydac cooling unit Chip conveyor High-pressure system

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Ihodpfxjwk D Efj Ag Ujt Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: used, TORNOS Micro 8 is a CNC automatic lathe engineered for high-precision machining with strong accuracy and reliability. Working capacities: 5 axes, workpiece length max 20 mm, max bar diameter 10 mm; collet tapers W15 (spindle) and F13 (back spindle). Key specs: stepless spindle 0–12000 t/min; rapid traverse X 20 m/min, Y 40 m/min, Z 20 m/min; spindle/back-spindle motors 2.2/3.7 kW; 3x400 V 50 Hz; total power 8 kVA; weight ~1600 kg; dimensions 1670×870×1650 mm. Equipment: LNS TRYTON 112 bar feeder, lamp, coolant system, oil mist extractor, RS232 interface, status light. Delivers tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical sectors. Ihedpox S Nwcsfx Ag Ujt

Condition: good (used), Year of construction: 2007, Maier ML125 Linear Year of manufacture: 2007 Fanuc control FMB Minimag 18 bar magazine loader Hydac cooling unit Chip conveyor Ihedpfx Agsx Stdae Ust High-pressure system

Condition: used, CITIZEN CINCOM R 07 VI is a high-precision CNC automatic lathe (Swiss-type) delivering strong accuracy and reliability. Capacities: 6 axes, 2 spindles; max turning Ø 7 mm, max length 40 mm, spindle bore 12 mm; threading up to Ø4 M, max tapping length 40 mm. Specs: spindle 0–16,000 rpm, 1.1 kW; back spindle up to 10,000 rpm, 0.5 kW; C-axis resolution 1°; supply 3x400 V 50 Hz, total power 4 kVA; weight ~950 kg; footprint 1465×560×1410 mm. Accessories: parts catcher, lamp, bar feeder LNS TRYTON 107, central lubrication, status light. Built to achieve tight tolerances; typical applications include automotive, watchmaking, medical, aerospace, and machine-tool components Ihodox S I Dhjpfx Ag Uot

Condition: good (used), Year of construction: 2007, Maier ML125 Linear Year of manufacture: 2007 Fanuc control FMB Minimag 18 bar magazine loader Isdpfox Stc Nex Ag Ueht Hydac cooling unit Chip conveyor High-pressure system

Condition: good (used), Year of construction: 2006, Maier ML32D Iedpfjx Stc Asx Ag Uoht Year of manufacture: 2006 Fanuc control FMB Turbo bar feeder magazine Chip conveyor High-pressure system

Condition: good (used), Year of construction: 2012, Maier ML32D Year of manufacture: 2012 Fanuc control FMB Turbo bar feeder magazine Chip conveyor High-pressure system Isdpfx Aox Stcvsg Usht