Used Atlas Copco Ga 11 C for sale (399)

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Iiedpfx Aewfg Hheacsh

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Iisdpfxeu Rptys Aacjh Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, We offer Atlas Copco compressors TYPE GA 55 Pressure 10 bar Motor 55 kW Year 2000 Compressor with documentation Isdjwa Iz Aspfx Aacoih We also have other compressors from Atlas Copco, Kaeser, and Mahle

Condition: ready for operation (used), Atlas Copco PF4000-C-PN-HW control system. 8433 7148 05 SN D 276 108, used, minor signs of wear, 100% functional, scope of delivery as per photos Iijdpsrv Nz Aefx Aacoh

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AII 471146, GA 75 screw compressor Maximum operating pressure: 10 bar Compressed air production: 192 l/s Power: 75kW Speed: 3000 r/min Iodpfx Ajt Du Syjacsih Weight: 1550kg

Condition: good (used), Year of construction: 2002, operating hours: 197 h, SCREW COMPRESSOR GA 18 + 7.5P Serial number: 272265 Operating hours: 197 Operating hours The integration of Atlas Copco GA compressors directly into the production area ensures a reliable flow of compressed air directly to the place of use. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. GA compressors are designed to offer maximum efficiency and ensure constant and reliable production. Isdpfx Aaswbti Iscsih Premium screw compressor Fully automatic, internally fully piped and wired compressor, single-stage oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Technical data Manufacturer: Atlas Copco Type: GA 18+ 7,5P Rotary screw compressor Max. Operating pressure: 7.5 bar Free air flow: 54.3 I/s Volume flow: 3.51m³/min Nominal shaft power kW 18.5 Shaft speed: 3000 r/min Oil/water separator: Öwamat Reference conditions Intake pressure: 1 bar Intake temperature: 20 °C Relative humidity: 0 % Usable volume flow at the outlet of the compact system in accordance with ISO 1217-3, C at operating overpressure 7.5 bar 58.5 Is: 3.51m³/min Nominal motor power: 18 kw Nominal motor speed: 2940 min Shaft power requirement of the motor at maximum operating overpressure: 21.1 kW Shaft power requirement when idling: 4.9 kW Compressed air temperature after the aftercooler: 25 degrees Cooling air volume: 1.15 m³ Oil filling quantity: 7.6 l Residual oil content:

Condition: ready for operation (used), Year of construction: 2012, operating hours: 30,000 h, functionality: fully functional, power: 37 kW (50.31 HP), fuel type: electric, operating pressure: 13 bar, pressure (max.): 12.5 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco GA 37 VSD FF - used premium screw compressor Speed-controlled screw compressor, air-cooled, oil-injected, full feature incl. integrated refrigeration dryer incl. heat recovery system Used device from year of manufacture 2012, functional, approx. 30,000 operating hours, without warranty Technical data: Motor power: 37 kW Refrigeration dryer: integrated Compressed air connection: G 1/2" Dimensions in mm (LxWxH): approx. 1766x970x1800 Weight: approx. 1,130 kg Max. pressure: 12.5 bar Volume flow: at 4 bar up to 7.43 m3/min, Isdpevcmwcefx Aacsih at 7 bar up to 7.32 m3/min, at 9.5 bar up to 6.40 m3/min at 12.5 bar up to 5.24 m3/min

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: AII 234242, overall weight: 385 kg, volume flow: 149 m³/h, operating pressure: 7 bar, Previously used for grit blasting, after renovation (oils, filters, control panel), tested and then set aside, the compressor is for sale in the condition shown in the pictures. Iisdpfx Aajwra Hbscsh The machine is in Szombathely, we can also help with loading (ramp, forklift). It can be sold without VAT within the EU, it is sold with an invoice.

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 389 kg, We offer 3 air compressors manufactured by Atlas Copco. All technical detils on request. Iodpfx Aajww Ei Seceih

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Isdpehpx U Aofx Aacsih

Condition: excellent (used), Year of construction: 2003, Air Compressor Atlas Copco Type: GA 18AFFVSD Year of manufacture: 2003 Iedjww Nv Njpfx Aacjih

Condition: good (used), Year of construction: 2002, SCREW COMPRESSOR GA 18 + 7.5P Serial number: 272262 Operating hours: Only 1 operating hour The integration of Atlas Copco GA compressors directly into the production area ensures a reliable flow of compressed air directly to the place of use. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. GA compressors are designed to offer maximum efficiency and ensure constant and reliable production. Iijdpjwbr Uisfx Aaceh Premium screw compressor Fully automatic, internally fully piped and wired compressor, single-stage oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Technical data Manufacturer: Atlas Copco Type: GA 18+ 7,5P Rotary screw compressor Max. Operating pressure: 7.5 bar Free air flow: 54.3 I/s Volume flow: 3.51m³/min Nominal shaft power kW 18.5 Shaft speed: 3000 r/min Oil/water separator: Öwamat Reference conditions Intake pressure: 1 bar Intake temperature: 20 °C Relative humidity: 0 % Usable volume flow at the outlet of the compact system in accordance with ISO 1217-3, C at operating overpressure 7.5 bar 58.5 Is: 3.51m³/min Nominal motor power: 18 kw Nominal motor speed: 2940 min Shaft power requirement of the motor at maximum operating overpressure: 21.1 kW Shaft power requirement when idling: 4.9 kW Compressed air temperature after the aftercooler: 25 degrees Cooling air volume: 1.15 m³ Oil filling quantity: 7.6 l Residual oil content:

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) Iiedpst Hdh Nsfx Aaceh With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Iiodpfswlp Hdjx Aacoh Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: good (used), Year of construction: 2002, SCREW COMPRESSOR GA 18 + 7,5P Item is available 3x, in the following options 1x serial number: 272261 Operating hours: 1492 Price: 5035€ 1x serial number: 272265 Operating hours: 197 Price: 5875€ 1x serial number: 272262 Operating hours: 1 Price: 6295€ The integration of Atlas Copco GA compressors directly into the production area ensures a reliable flow of compressed air directly to the place of use. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. GA compressors are designed to offer maximum efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally fully piped and wired compressor, single-stage oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Elektronikon II compressor control system Technical data Manufacturer: Atlas Copco Type: GA 18+ 7,5P Screw compressor Max. Operating pressure: 7.5 bar Free air output: 54.3 I/s Volume flow: 3.51m³/min Iiedpfxouyg S Ee Aacjh Nominal shaft power kW 18.5 Shaft speed: 3000 r/min Oil-water separator: Öwamat Reference conditions Suction pressure: 1 bar Intake temperature: 20 °C Relative humidity: 0 % Usable volume flow at the outlet of the compact system according to ISO 1217-3, C at operating overpressure 7.5 bar 58.5 Is: 3.51 m³/min Nominal motor power: 18 kw Nominal motor speed: 2940 min Shaft power requirement of the motor at maximum operating overpressure: 21.1 kW Shaft power requirement at idle: 4.9 kW Compressed air temperature after the aftercooler: 25 degrees Cooling air volume: 1.15 m³ Oil filling quantity: 7.6 l Residual oil content:

Condition: excellent (used), Year of construction: 1991, overall weight: 1,000 kg, volume flow: 6.72 m³/h, operating pressure: 75 bar, input voltage: 400 V, ATLAS COPCO GA 45 screw compressor With refrigerant dryer Iodpsukvvajfx Aaceih 45 kw engine Capacity 6.72 m3/min Pressure 7.5 bar The compressor is fully functional.

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressed air system consisting of: Ijdpfxswz Ul Dj Aacoih Atlas Copco Compressor GA15VSD+ Year 2016, approx. 13,000 hours – 15 kW – Max 13 BAR Atlas Copco Refrigeration Dryer FX8 Year 2020 MaBe 500L Tank Year 2011, height approx. 2.15 m Almig AKC300 Activated Carbon Adsorber incl. Condensate Drain Valve SPX Flow Technology EDDSU2 The system is fully functional and has been regularly maintained. Already dismantled and packed on a pallet. Very good condition, see pictures. Forklift available for loading. Collection only by appointment in 75053 Gondelsheim. Shipping by freight forwarder possible, please inquire with postcode.

Condition: ready for operation (used), 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Ijdpoxl Hxbofx Aaceih Power imput: 90kW Volume (L): 1500 L

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AIF074692, power: 90 kW (122.37 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA90 FF compressor is a reliable and efficient solution designed to meet demanding industrial requirements. As an oil-lubricated model, it uses oil to ensure optimal performance and enhanced durability. Although this unit is pre-owned, it retains the quality and robustness typical of the Atlas Copco brand. With impressive rated power, the GA90 FF is perfectly suited for industrial applications where a consistent and reliable air supply is essential. Its integrated design facilitates easy installation and maintenance, reducing downtime and increasing productivity. Iodpfxexnz Nao Aacsih Ideal for those seeking performance and reliability, the GA90 FF remains a top choice for industrial environments that require intensive compressor use.

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Iijdpfjxk U Alsx Aacoh Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: repair required (used), Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in the current condition as viewed -defective, not functional, problem: frequency converter does not communicate with the software -Delivery quantity: 3.2-6.9 m³/min -Engine power: 18-24 kW -Construction: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of construction: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg Ijdpjhabk Dofx Aacjih

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Central Compressor System | Atlas Copco GA55VSD comprising: - 2 Atlas Copco GA55 VSD+ screw compressors - Each with an output of 55 kW (variable speed, oil-injected, 400V/50Hz, air-cooled), each weighing 876 kg Ijdpfx Ajxn Shasacjih - 2 Atlas Copco FD 220 VSD refrigerant dryers (variable speed, 400V/50Hz, air-cooled), each weighing 143 kg - Compressed air storage tank by Lohenner, capacity 5,000 liters, 11 bar, steel, galvanized, upright design - Oil/water separator OSC 300 Clay Inspection is possible at any time by appointment. #Tags: AtlasCopco | GA55 | FD220

Condition: like new (used), Year of construction: 2019, operating hours: 1,998 h, functionality: fully functional, As-new screw compressor Atlas Copco GA75VSD+FF. 75 kW with 13 bar and 13.50 m3/min. Year of manufacture 2019 with only 1998 hours. Iijdpsxlhgyefx Aaceh

Condition: new, feed pressure 11 bar intake capacity 480 cm³ volume capacity 360 Receiver capacity 270 l / bar Number of cylinders 1 Stk. motor 400Volt / 3,0KW V / KW turning speeds 892 U/min weight of the machine ca. 200 kg. range L-W-H 1,6 x 0,7 x 1,2 mm Iiedpfx Aajvkizgjcoh

Condition: new, feed pressure 10 bar Effective free air delivery 252 L/min Receiver capacity 90 l / bar Number of cylinders 1 Stk. motor 400Volt / 1,5KW V / KW turning speeds 777 U/min weight of the machine ca. 70 kg. range L-W-H 0,97 x 0,5 x 0,9 mm Iiedpfxovkizto Aacjh