Used Atlas Copco Ga 7 Ff for sale (372)

Condition: excellent (used), Year of construction: 2016, operating hours: 19,000 h, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 700 m³/h, operating pressure: 12 bar, pressure (min.): 4 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Fully functional Atlas Copco frequency-controlled screw compressor with built-in cooling dryer. Complete service performed, including replacement of oil, oil filter, air filter, separator filter, and thermostat. Fpedpfx Aijz Dpt Ajkep

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. Fpedpfxowlp Hds Aiksp The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,087 h, functionality: fully functional, machine/vehicle number: API474668, power: 26 kW (35.35 HP), Atlas Copco GA 26 VSD FF Rotary Screw Compressor Year 2023 For sale is a highly efficient variable speed driven premium screw compressor of the latest generation: Atlas Copco GA 26 VSDs FF with integrated refrigerant dryer (Full Feature). The machine was manufactured in 2023 and has an extremely low operating history of just 1087 running hours. Technically the compressor is in absolute 1A top condition and ready for immediate operation. Fpedpfx Asz Sqa Ueikep Thanks to the state of the art VSDs variable speed technology the unit adapts flexibly and precisely to your actual compressed air demand. This ensures maximum energy efficiency and drastically reduces operating costs. With the integrated Full Feature equipment including a built in refrigerant dryer the system delivers dry and clean compressed air directly requiring a minimal footprint. Condition of the machine: Technical: 1A Top Condition. Runs perfectly, reliably, and without any maintenance backlog. Optical: The housing shows some cosmetic dents and scratches (see photos). These are purely transport related cosmetic imperfections. The flawless function, safety, and lifespan of the unit are in no way affected. Technical Data: Manufacturer: Atlas Copco Model: GA 26 VSDs FF with integrated refrigerant dryer Serial Number: API474688 Year of Manufacture: 2023 Operating Hours: 1087 h Motor Power: 26 kW (35 hp) Motor Speed: 5050 rpm Maximum Working Pressure: 10.25 bar Free Air Delivery at maximum pressure: 5.8 m3/min (96.5 l/s) Regulating Range Free Air Delivery: continuously variable from 0.95 to 5.88 m3/min Noise Level: 66 dB(A) Dimensions: Length 1330 mm, Width 870 mm, Height 1725 mm Weight: 604 kg Electrical Connection: 400 V, 50 Hz, 3 Phases Country of Origin: Belgium

Year of construction: 2000, condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 2x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Fpsdpfoulkvdjx Aikop

Condition: good (used), Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA37VSDFF SERIAL NO.: API580058 YEAR: 2009 POWER (kW): 37 CAPACITY (m3/min): 7.25 PRESSURE (bar): 12.5 OPERATING HOURS (DOC/TOTAL): 100392 FREQUENCY INVERTER: yes Fpsdpfx Aexyarqjikep BUILT-IN DRYER: yes, R404 1.25kg HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no DOCUMENTATION: no CONNECTION: 2'' NEW/USED: USED

Condition: good (used), Year of construction: 2003, machine/vehicle number: AII 146363, Offer 26333 Technical data: Fsds Ahhykepfx Aikepp - Total operating hours: 56167 h - Operating pressure: 10 bar - Delivery rate: 14.5 l/s - Drive: 400 V / 7.5 kW - Space requirement: approx. W 950 x H 1250 x D 850 mm - Weight: approx. 250 kg

Condition: good (used), Year of construction: 2016, machine/vehicle number: AP I 260800, Offer 26334 Technical data: Fpjdj Agr Ewopfx Aikop - Operating hours: 28407 h - Operating pressure: 12.75 bar - Delivery rate: 1.95 m³/min - Drive: 400 V / 11 kW - Motor speed: 3000 rpm - Integrated dryer - Space requirement: approx. W 1500 x H 1600 x D 750 mm - Weight: approx. 420 kg

Condition: repair required (used), Year of construction: 1996, operating hours: 444 h, Atlas Copco GA 7 Rotary Screw Compressor – 7.5 kW – Year of Manufacture: 1996 Sale on behalf of a customer! For sale is a used rotary screw compressor from the renowned manufacturer Atlas Copco, model GA 7, built in 1996. Fpodpfxs Adu H Uj Aiksp The compressor has been in storage for a very long time. For this reason, it is being sold as defective / for parts. Technical Specifications: • Manufacturer: Atlas Copco • Model: GA 7 • Year of manufacture: 1996 • Motor power: 7.5 kW • Max. pressure: 7.5 bar • Delivery rate: 1,140 l/min • Control system: Elektronikon II • Displayed operating hours: 444 h • Condition: Used Important note regarding operating hours: The original controller was replaced with a different unit. Therefore, the currently displayed 444 operating hours cannot be verified as the actual total runtime of the compressor. The actual total operating hours are unknown.

Condition: excellent (used), Year of construction: 2014, PROD. ATLASCOPCO TYPE GA75 FF PLUS S/N API619181 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 14.95 DISCHARGE PRESSURE (bar) 7.25 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes, R410a 1.1 kg Fpjdpezicypjfx Aiksp HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2005, PROD. ATLAS COPCO TYPE GA90 FF S/N AIF096343 YEAR 2005 POWER (kW) 90 CAPACITY (m3/min) 14.11 PRESSURE (bar) 7.2 Fedpfs Ah Hwbjx Aikspp HOURS (RUNNING/TOTAL) 27803/61642 FREQUENCY CONVERTER no BUILT-IN DRYER yes, R404a, 5 kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2' NEW/USED USED

Condition: excellent (used), Year of construction: 2023, Input 415 volts, Fodpfo Ai Syrex Aikjpp 44CFM pressure 10 Bar.

Condition: ready for operation (used), Year of construction: 2006, MAKE: ATLAS COPCO MODEL: GA45 FF Serial no.: API591201 Year: 2006 Power (kW): 45 Output (m3/min): 7.28 Pressure (bar): 7.8 Operating hours (load/total): 8054/20214 Frequency inverter: no Built-in dryer: yes Heat exchanger: no Cooling (air/water): air Mounted on tank: no Fjdpfx Aioy Aux Tekspp Connection: 2'

Condition: excellent (used), Year of construction: 2014, S016896 Fpodpfx Aijzi Dbhoksp PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 Defective screw compressor - compact unit - Operating hours: 16550 h - Operating pressure: 10 bar - Delivery rate: 15.9 l/s - Drive: 400 V / 7.5 kW - Motor speed: 3000 rpm - Air tank: 250 L Fjdpfxjwrcq Ne Aikopp - Space requirement: approx. W 700 x H 1830 x D 1050 mm - Weight: approx. 250 kg

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Fpodpfx Aiet Hdh Njkjp Mileage 13200 hours The compressor is fully functional.

Condition: excellent (used), Year of construction: 2015, S014890 Fsdpfxjyli Nqs Aikjpp MANUFACTURER: ATLASCOPCO MODEL: GA15VSDFF PLUS S/N: API257970 Year: 2015 Power (kW): 15 Output (m3/min): 2.51 Pressure (bar): 12.75 Operating hours (documented/total): 54,624 Frequency inverter: yes Built-in dryer: yes

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility Fpodsy Iplfjpfx Aikop

Condition: used, Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA75 VSD Fpjdpfoxxm Atsx Aikop SERIAL NUMBER: API656533 YEAR: 2009 POWER (kW): 75 CAPACITY (m3/min): 14.68 PRESSURE (bar): 13

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Fjdpfx Aijwgca Tskspp Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Noise level: 68 dB(A) Tank capacity: 400 liters Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Cooling: Air-cooled Integrated dryer: Yes Control system: Elektronikon®

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: API607459, overall weight: 1,580 kg, power: 55 kW (74.78 HP), volume flow: 637.2 m³/h, operating pressure: 7 bar, pressure (max.): 7.3 bar, type of cooling: air, Equipment: refrigerant dryer, Atlas Copco GA55+ FF screw compressor – 55 kW – manufactured in 2009 For sale: a well-maintained Atlas Copco GA55+ FF screw compressor with an integrated air dryer. The compressor has already been serviced and is ready for immediate use. Specifications: Type: Atlas Copco GA55+ FF Year of manufacture: 2009 Motor power: 55 kW / 75 hp Capacity: 10.62 m³/min Working pressure: 7.3 bar Motor speed: 2,978 rpm Weight: approx. 1,580 kg Operating hours: 17473/4022 Equipped with an integrated air dryer Fjdpfx Ajzku Ubeikspp Serviced and ready for use This compressor is suitable for industrial applications that require a reliable compressed air supply. Optionally available with a new or used compressed air tank.

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Fpjdpfx Aexk U Aljikop Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: excellent (used), MANUFACTURER: ATLAS COPCO Fodpfx Aiextblxjkopp MODEL: GA132VSD FF SERIAL NUMBER: APF136837 YEAR: 2008 POWER (kW): 153 CAPACITY (m3/min): 22.9 m3/min - 381 l/s PRESSURE (bar): 8.5 FREQUENCY INVERTER: yes BUILT-IN DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no DOCUMENTS: no CONNECTION: 2 NEW/USED: USED

Condition: excellent (used), ATLAS COPCO GA 110+ FF Screw Air Compressor ATLAS COPCO GA 110+ FF industrial screw air compressor, designed for the continuous and efficient production of compressed air in industrial facilities with high and constant demand. The GA series from Atlas Copco uses lubricated rotary screw technology, especially suitable for industrial applications where a reliable supply of compressed air is required for long operating periods. This unit corresponds to the FF (Full Feature) version, a configuration that integrates compressed air treatment within the unit itself, providing a compact solution for air generation and conditioning. MAIN FEATURES -Manufacturer: ATLAS COPCO -Model: GA 110+ FF -Type: Rotary screw air compressor -Configuration: Full Feature (FF) -Nominal power associated with the model: 110 kW -Continuous compressed air production -Lubricated rotary screw technology -Integrated cooling system -Air dryer integrated in the FF configuration -Condensate separation -Air filtration and treatment system Fjdpfewnxzisx Aikjpp -Electronic control via display / integrated controller -Monitoring of operating parameters -Complete, soundproof enclosure -Compact, packaged design -Robust construction for continuous industrial operation -Direct connection to compressed air networks -Access via panels for maintenance OPERATION Atmospheric air is drawn into the compressor and directed to the screw element, where two rotors progressively compress the air until it reaches the established working pressure. Subsequently, the necessary stages of oil separation, cooling, and air conditioning are carried out. In this GA 110+ FF version, the integrated dryer reduces the humidity present in the compressed air before it is fed into the factory network, eliminating the need to install a separate dryer in many configurations. The system can supply a general compressed air network intended for: -Pneumatic actuators and cylinders -Automatic valves -Filling and packaging equipment -Process machinery -Pneumatic transport systems -Instrumentation -Air-powered cleaning equipment -Automatic production lines APPLICATIONS Especially suitable for food processing plants, beverage factories, canning factories, packaging facilities, and other industries with a significant demand for compressed air. The combination of ATLAS COPCO, screw technology, 110 kW power, and Full Feature configuration provides a centralized solution for the supply of compressed air in industrial facilities. Machine available for inspection. Additional technical information, working pressure, flow rate, operating hours, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2007, operating hours: 30,132 h, INTERNAL VEHICLE NUMBER: M661----ATLAS COPCO AIRPOWER XA547 KD PE A----OPERATING HOURS: 3013.2----INCLUDES 11 ASSORTED COMPRESSED AIR HOSES ----OPERATING WEIGHT: 650 KG----ENGINE POWER: 19.4 KW----MINIMUM PRESSURE VALVE: 4.5 BAR----CONSTRUCTION COMPRESSOR ----FUEL TANK: APPROX. 32 LITERS EFFECTIVE VOLUME FLOW: XAS 57: 3.0 m³/min AIR TEMPERATURE AT OUTLET: APPROX. +10 °C TO +15 °C ABOVE AMBIENT TEMPERATURE OPERATING PRESSURE (NOMINAL VALUE): 7.0 BAR MAXIMUM RELIEF PRESSURE: 8.5 BAR MAIN AIR FILTER ELEMENT 1604 2230 00 AIR-OIL SEPARATOR (OIL REMOVER) 1613 9436 00----+++ Exclusive offer at Autohaus Mat GmbH: Up to 1,000 € trade-in bonus? Your advantage for switching vehicles! +++ Contact us directly via WhatsApp at: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing tailored to your needs: * With or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will guide you from the initial consultation to the vehicle handover. Fsdo Aiaiujpfx Aikopp 4. Our additional services: In addition to the vehicle purchase, we offer exclusive services for a smooth process: * Worldwide vehicle sales: Support with purchase and export, wherever you are. * Transfer registration: Provision of export or short-term registration for transport. * Customs clearance: We take care of all formalities for export abroad. * Delivery of your vehicle: Safe and punctual delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, net sales for export are generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: * Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp at:

Condition: used, Year of construction: 2009, operating hours: 73,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Product description: GA75P A 10 APB 400 50 Product number: 00000402 | 8152811462 Date of manufacture: 09/30/2009 Permissible maximum operating pressure: 10 bar Volume flow: 184.1 l/s or 11.05 m³/min Product description: GA 75 Brand: Atlas Copco Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Model variant: Workplace (W) Pressure Vessel Approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Equipped ex works with integrated heat recovery. Current operating hours: approx. 73,000 hours Fsdpfx Aszvqp Sjikepp The compressor is functional. It has no outstanding maintenance or repairs. The last maintenance, according to the manufacturer's specifications, was performed in 02/2026 at 70,500 operating hours. The compressor was overhauled in 2018 at 33,000 operating hours and received a new compressor element. Used machine, sold as is, without warranty.