Used Atlas 72 C for sale (466)

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm Nwedsgr E R Uopfx Agnoc -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Condition: used, first registration: 03/2012, color: grey-black, Year of construction: 2012, gearing type: other, LICENSE PLATE: AH12361 TITLE: ATLAS ROLL-OFF TRAILER WITH AIR SUSPENSION, SANDBLASTED AND REPAINTED REF: 25R02 YEAR: 03/2012 AXLES: 2 WHEELBASE: 4800 mm OVERALL LENGTH: 9.16 m NATIONAL/INTERNATIONAL: Italy PAYLOAD: 16,400 kg - TRAILER GVW: 20,000 kg when fully loaded BODY TYPE: Roll-off BODY BRAND: ATLAS ADR: Yes BODYWORK SUITABILITY FROM: 5.00 m + 0.20 m TO: 7.00 m + 0.20 m SUSPENSION: Air BRAKES: Disc brakes TYRES: 265/70 R19.5 ACCESSORIES - 4 new brake discs - New brake pads - Caliper locking with towing vehicle’s oil hoses - 4 inner calipers (2 per side, operate independently) REFURBISHED: Yes INSPECTED: Yes TYRE CONDITION: 30% front, 40% rear PRICE: €17,500.00 + VAT Subject to errors and/or omissions The prices shown do not include VAT. Please contact our sales department for up-to-date prices and terms. For further information: Loris: 3484773001 URL: #therolloffspecialists AURORA ROLLOFFS specializes in the sale and purchase of industrial and commercial vehicles, primarily in the waste sector. Nwjdpfx Agjwq Ey Rsnec Specialists in trucks, trailers, and roll-off equipment. With a fleet ready for immediate delivery of over 50 trucks and more than 150 bins and containers, with or without roll-off cranes. E.&O.E. Due to the large number of listings and details provided, Aurora invites you to confirm the accuracy of the information with our sales staff.

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Nwjdpfx Agjl Tn Eponec

Condition: used, color: red, Year of construction: 1981, operating hours: 4,391 h, Tank pressure: 11 bar Njdpfxjx S Nxaj Agnswc

Condition: used, Year of construction: 2002, operating hours: 15,152 h, Equipment: all wheel drive, * Pallet fork & bucket * Enclosed cab * Front hydraulics Nodetrqk Ropfx Agnswc * Engine power: 74 kW * Year of manufacture: 2002 * Work lights ----Internal vehicle number 9531----Errors & interim sale excepted WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: excellent (used), functionality: fully functional, overall weight: 1,570 kg, Year of construction: 2019, Two pieces available Machine type: internal combustion engine-driven pump Machine brand: ATLAS COPCO Designation: WEL PST 100 CNP Year of manufacture: 2019 Own weight (kg): 1570 Engine type: Hatz 2G40 /compression ignition/ Engine power (kW): 9.8 Engine capacity (cm3): 997 Nwodpfxsvz Drhj Agnsc Fuel type: diesel Maximum capacity – 100m3/h. Pumping height – 20 m. Suction pipe diameter – 100mm. Pumping pipe diameter – 100mm. The Atlas Copco WEL PST piston pump is a high-performance device suitable for difficult tasks requiring 24-hour operation, designed to save fuel.

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Nwodpfx Agjyi Dbponec Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/ Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hrs. Light duration device 647.4 hrs. Total lamp operation 88.9 hrs. Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. Nsdpstq Em Eofx Agnowc The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. The 3000 series is CE, UL, CSA, ISO and EN certified. Key features of this device include: a rotating sample basket to maximize the homogeneity of all samples; customized nozzles for uniform sample front and back spraying; ASTM black plate thermometer or ISO/DIN black standard thermometer for control and monitoring, temperature at sample level to ensure test repeatability. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - display of all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Features: Climate type Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Features: Type Climate Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Pressure 80-100 PSI (552-689 kPa) Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Nsdpfx Agjucd Rbsnjwc Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Njdpfx Aoxbd Raognjwc 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm Nwedpfxjb A I Ino Agnoc -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Width: 600 mm Nwodpfjb A I Rcex Agnjc -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system Nwedob A Sgkspfx Agnoc -Dimensions: 660/260/H700 mm -Weight: 18 kg

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design • Suitable for precision assembly and serial production Set includes: Nwodpoyc Rvasfx Agnec • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly • Production lines • Professional workshops An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, overall weight: 128 kg, ambient temperature (max.): 46 °C, pressure (max.): 13 bar, MACHINE DETAILS Nodpoydnyxjfx Agnswc Weight: 128 kg Max. air pressure: 13 bar Max. ambient temperature: 46 °C

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: AII 31.3506, power: 22 kW (29.91 HP), pressure (max.): 7.5 bar, rotational speed (max.): 3,000 rpm, MACHINE DETAILS Power: 22 kW Engine Nwodpoydnxujfx Agnsc Engine power: 30 kW Max. speed: 3,000 rpm Free air delivery: 83 l/s Final pressure: max. 7.5 bar

Condition: used, Year of construction: 2023, operating hours: 3,044 h, machine/vehicle number: ESF407085, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Nwedpfx Astr I Hksgnjc Please contact PFEIFER GROUP for more information

Condition: used, Atlas Copco compressor package – from the smallest to the largest! We offer a set of Atlas Copco screw compressors in various power and efficiency variants – from compact models to large industrial units. The perfect solution for companies looking for reliable compressors at attractive prices. - Wide selection of models Nsdjq Dlk Aepfx Agnswc - Favourable prices - Fast and efficient order fulfillment Contact us to match the right compressors to your needs!

Condition: used, color: other, Atlas 60.1, 2x Extendable, 2x Extra function = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U Nwsdpex Nddljfx Agnsc - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Nedjv Snn Iopfx Agnewc Incl. oil-water separator System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.

Condition: used, mileage: 1 km, axle configuration: 4x4, gearing type: automatic, Year of construction: 2013, GVW: 1.480 kg Nsdpfx Agjx R T Tljnowc Please contact Emal Jaweed for more information

Condition: used, mileage: 1 km, power: 242 kW (329.03 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2012, GVW: 24.000 kg Nwedpfx Agox R T N Honjc Please contact Emal Jaweed for more information

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), axle configuration: 4x2, gearing type: automatic, Year of construction: 2005, GVW: 1.000 kg Please contact Emal Jaweed for more information Nwjdox R Tyfepfx Agnoc

Condition: used, Year of construction: 2005, operating hours: 5,316 h, Equipment: all wheel drive, Equipment: * 5,316 operating hours * Engine power 53.5 kW * 20 km/h * Hydraulic side-tipping bucket * Forks * Hydraulic connections * Additional work lights * Beacon Nwsdpfxex Rfbzs Agnjc * Quick coupler Additional information: * 1 previous owner * First delivery in Germany * Year of manufacture: 2005 * Operating weight: 5,975 kg * Total weight: 6,500 kg * Wheel loader ready for immediate use Since 1972, your reliable partner for automotive and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles available: vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. Upon request, we are happy to make you a tailored offer! Trade-in of your commercial vehicle or construction machinery is welcome. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your "new" commercial vehicle is available through our external partners at an additional charge. The information provided in advertisements, online listings, price tags, and images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment must be verified separately as needed. Subject to errors and prior sale.

Condition: used, Year of construction: 2023, machine/vehicle number: ESF371201, fuel type: diesel, power: 34 kW (46.23 HP), motor manufacturer: Kubota, Field of application: Construction Nodotr Nknopfx Agnewc Empty weight: 1.065 kg Generator capacity: 45 kVA Transport dimensions (LxWxH): 2.15x0.99x1.47 Please contact PFEIFER GROUP for more information