Used Atlas 60 for sale (463)

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control Gjdpfx Asxbd Raoacekc - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: ready for operation (used), Year of construction: 2007, 37KW 12.5 bars Gkedpevr S H Ujfx Aacoc

Condition: excellent (used), Year of construction: 2012, operating hours: 21,775 h, functionality: fully functional, motor manufacturer: Siemens, power: 500 kW (679.81 HP), volume flow: 68.33 m³/h, pressure (max.): 10.4 bar, type of cooling: water, 2012 Atlas Copco ZR500VSD, this machine is very low hours only 21,775 from new, and most hours done at low percentage RPM. The machine is in perfect working order and has been tested in our company and a video is available on request. Brought to the UK from Germany by a major UK company but never re-installed hence the very low running hours Gjdpfx Aaow Sdadjcskc Stored in dry clean storage and turned over on regular basis to ensure in good stored condition

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2014, operating hours: 3,500 h, Atlas Copco XAS97 Compressor – 2750 rpm – 7 Bar – 36 kW – Weight 1060 kg – = Further Information = Year of manufacture: 2014 Intended use: Construction Contact Miguel Cubas for more information. Gsdpfx Ajxcyb Reacekc = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: good (used), Year of construction: 2009, operating hours: 63,000 h, functionality: fully functional, machine/vehicle number: API 656 564, overall weight: 1,213 kg, total length: 2,000 mm, total width: 1,300 mm, total height: 1,968 mm, power: 90 kW (122.37 HP), fuel type: electric, pressure (min.): 3 bar, pressure (max.): 13 bar, noise level: 74 dB, type of cooling: air, Equipment: documentation/manual, type plate available, The system was used to operate dry ice blasting equipment. A 5,000-liter tank was connected upstream and is included in the offer. After our relocation, the system was no longer put into operation. Gedoxd Umqspfx Aacekc The system additionally features a water heat exchanger, allowing the waste heat to be used for heating.

Condition: used, Year of construction: 2018, operating hours: 5,081 h, Loading bucket approx. 1.8 m³, hydraulic quick-change system, pallet forks, good condition, vehicle may be wrapped and/or labeled for advertising purposes. Gkjdpfxjxb Ivas Aacec Our offer is generally without new technical inspection (TÜV). If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are pleased to offer you financing or leasing options for this machine. Please contact us!

Condition: used, Year of construction: 1999, operating hours: 4,061 h, * · · · ??Liebe Interessenten, ??gerne können Sie uns über WhatsApp kontaktieren: ???.Für Anfragen außerhalb von Deutschland nutzen Sie bitte die internationale Rufnummer: · ? 6569??.Wir freuen uns auf Ihre Nachricht * Atlas 80 * Radlader * Bj. 1999 * 4061 Betriebsstunden * Deutz Motor * BF4L 1011 F * 51,5 KW * Straßen und Arbeitsbeleuchtung * Palettengabel * hydr. SW * 3. Steuerkreis * Reifen 405/70R20 ca. 99% * Rundumlicht * Ersatzteilbuch * Betriebsanleitung * Fahrzeugbrief * Fahrzeugschein * Behördenfahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * * WhatsApp 00496569 Gksdpsxfdb Hjfx Aacec

Condition: good (used), Year of construction: 2017, Atlas Copco AQ37VSD compressor Gedpfjw Dykqox Aacskc 2017, 13Bar, 37Kw, with Atlas Copco BD100 air dryer and Lohenner 1000L air receiver tank, two lots available

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Gsdpop N H Husfx Aacokc Dismantled due to insufficient compressor performance. Was hardly used :( Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Condition: used, Year of construction: 2016, operating hours: 1,600 h, Field of application: Construction Serial number: APP42xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21462 Specifications: 2016 model Hours: 1,600 Pressure: 7 bar Gkodjxivw Uopfx Aacjc Speed: 3,000 RPM Power: 26.5 kW Weight: 750 kg Functions as it should Tires (see pictures) Ready for delivery Hours: 1600 Own weight: 750 Model: XAS68

Condition: excellent (used), Year of construction: 2012, operating hours: 14,785 h, functionality: fully functional, Second hand oil-free compressor Atlas Copco ZT250FF. 250 kW, 10 bar with 42 m³/min. Integrated drum dryer. Gedpfexdwr Aox Aacskc

Condition: used, Year of construction: 2018, operating hours: 6,320 h, 4+1 bucket approx. 0.8 m³, hydraulic quick-coupler system, pallet forks. The vehicle may be wrapped and/or labeled with advertising. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide you with a quote from our partner workshops! The vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us! Gedoxb Iuijpfx Aacskc

Condition: ready for operation (used), functionality: fully functional, power: 168 kW (228.42 HP), fuel type: diesel, color: yellow, overall weight: 16,600 kg, chain condition: 70 %, Year of construction: 2012, operating hours: 6,921 h, Equipment: air conditioning, cabin, Year of manufacture: 2012 Hammer operating hours: 6,921 h Total operating hours: 17,063 h Gkjdpfxsxhchwe Aacoc Enclosed cab Air conditioning Rear view camera 6 drill rods (complete set) Drill bit with diameter of 85 mm Fuel filling pump CAT C7.1 Tier 4 Final engine with 168 kW CE/EPA Undercarriage 70% remaining Only one previous owner, always fully serviced Manufactured in Sweden Operating weight: 16.6 t Additional information: Drill holes from 64 mm to 127 mm possible Max. drilling depth: 37 m.

Condition: good (used), Year of construction: 2003, Atlas Copco ZT30 compressor 2003, 30Kw, 7.5Bar, with Ultrafilter dryer HL-ALD0300M and air receiver tank, two sets in stock Gkedpfxew Dygxs Aacjc

Condition: like new (used), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Instrument XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spraying System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. This device is designed to simulate sunlight, weather, and climatic influences and is used worldwide in research, quality control, and material testing. Features: - Professional equipment for UV and weather resistance tests - Ideal for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Features: - Weathering and lightfastness testing unit with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spraying system (ultrasonic humidifier, spray rods) - Measuring system with XENOSENSIV sensor for irradiance and black standard temperature measurement - Integrated touchscreen display for control and programming - Pre-installed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely programmable test procedures - Documentation capability via integrated printer (paper rolls) Gsdpsw Thykjfx Aacekc - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2001, operating hours: 70,000 h, overall weight: 5,000 kg, power: 250 kW (339.91 HP), pressure (max.): 10 bar, type of cooling: water, Well-functioning oil-free compressor (also suitable for Spareparts Airend) Gkodexbdrdspfx Aacjc

Condition: excellent (used), functionality: fully functional, power: 48.6 kW (66.08 HP), overall weight: 1,400 kg, Year of construction: 2017, operating hours: 1,896 h, ATLAS COPCO COMPRESSOR XATS138 7.00m3 2017 Mobile compressor ATLAS COPCO XATS 138 with aftercooler and WSD80 (water separator) Complete service performed – all filters and fluids replaced. Also equipped with a brand new battery. Technical specifications: Capacity: 5.00–7.00 m3/min; Gkedpfsxanyiex Aacjc Working pressure: 7–10.3 bar; Year of manufacture: 2017; KUBOTA engine Operating hours: 1896 Compressor fully operational.

Condition: used, Year of construction: 2018, operating hours: 4,728 h, Loading bucket approx. 1.8 m³, hydraulic quick-change system, pallet forks, good condition, vehicle may be wrapped and/or labeled for advertising purposes. Our offer is generally without new technical inspection (TÜV). If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. Gkedpjxb It Esfx Aacjc We are pleased to offer you financing or leasing options for this machine. Please contact us!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SF22+, overall weight: 687 kg, power: 22 kW (29.91 HP), volume flow: 144 m³/h, operating pressure: 8 bar, Atlas Copco compressor SF22+ dryer CD45+ set Oil-free compressed air compressor Pressure: 8 bar Capacity: 2.4 m³/min 22 kW Gkedpfx Aoxby H Dsacjc Weight: 687 kg Year of manufacture: 2024 Unused compressor and dryer set All employees speak Dutch, German, and English Prices are exclusive of VAT Shipping possible (subject to extra charges) (Changes and errors in technical data, information, and pricing as well as prior sale reserved)

Condition: good (used), Blumer Atlas D-18 M Label punching machine Gjdexmu T Nopfx Aacskc Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: like new (used), Here we offer you a weathering tester. The Xenotest Beta+ is a high quality xenon device with a rotating sample carousel and an exposure area of 4000 cm². It has a complete set of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger test volumes or sample sizes. - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touch screen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300-400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Display of diagnostic messages Gksdpsihfrrefx Aacec - Memory for 10 user-defined test methods - Preprogrammed international standard test methods - Multilingual user interface - Non-aging XENOCHROME filters to simulate daylight outdoors, Daylight behind windows - On-rack XENOSENSIVE 300-400 nm for measurement and control of irradiance (in W/m2) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or via Dual control: chamber air temperature and Schwarz standard temperature (up to 130 °C) - Fan-controlled temperature difference between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60 liter water reservoir - Outer cylinder made of special UV glass - Shutdown after irradiation amount, exposure time or total operating time - Advanced auto-start functions - Data output via memory card or RS 232 interface - Ethernet interface for connection to internal computer network and use of of XenoTouch Add-Ons 1, 2 and 3 (remote control, e-mail service, online monitoring) Dimensions Width x depth x height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Godexbdppspfx Aacokc

Year of construction: 2008, condition: ready for operation (used), 1) Reciprocating compressor Prematic PAKO 1201/270, year of manufacture: 2008, displacement: 1200L/min, flow rate: 925L/min, tank volume: 270L, speed: 700rpm, power: 7.5kW, operating pressure: 10bar, operating hours: approx. 5257h. 2) Screw compressor Atlas Copco GA7FF, year of manufacture: 1999, operating pressure: 8bar, flow rate: 1092L/min, power: 7.5kW, speed: 3000rpm, weight: approx. 250kg, operating hours: 14057h. Documentation available. An on-site inspection is possible. Gkjdjxf Iinspfx Aacec

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, color: red, Year of construction: 2023, operating hours: 18 h, Equipment: air conditioning, General information Applicable material: Waste Serial number: 252M301318 Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: Cummins Weights Empty weight: 26.400 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Gkedpfx Aasw Nmtujcec Other information Tyre size: 10.00-20/7.50 Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 5,025x2,5x3,11 Production country: DE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: excellent (used), functionality: fully functional, We currently have over 15 Atlas Copco GA90 units in stock in various configurations. Frequency-controlled. With integrated dryer. Gjdjxctxijpfx Aacjkc