Mobile excavator

ATLAS 1905 Mobilbagger/Klima/Hammerhydraulik

Condition: excellent (used), Year of construction: 2009, Used Bottling Line | Used Beverage Line | Soft Drinks NP 602 | PET BOTTLING LINE 12,000 BPH Speed: 12,000 Bph Blow molding machine SIPA Year: 2009 Number of cavities: 8 Preform elevator Preform orientator Chiller Formats of 05 L - 1 L - 1.5 L Monoblock TETRA PLAST RFA-40 Year: 1995 Filling type: aseptic Cap type: prethreaded plastic 38mm Caps elevator Dryer EUROPOOL Year: 2007 Type: air blades Gbsdpjtqfcgofx Ag Rog Labeling machine KRONES Type: roll-feed Sleever machine CLEVER 2019 With Steam Tunnel Bottle rejection system FMT dryer Year: 2011 Type: air blades SMI Bundler Year: 2009 TWIN PACK handle applicator Year: 2000

Condition: new, range L-W-H 1860x595x150 mm weight 125 kg 10 St. Tooltrolley 158cm. 10 Drawers workbench with door and rear wall Total dimensions completely complete 186 x 59.5 x 149 cm. Dimensions of only the tool trolley including wheels and handles 186 x 56 x 94.5 cm. Dimensions of the open compartment behind the left door 40 x 52 x 54 cm. Dimensions of the right 4 top drawers 36.5 x 50 x 7 cm. Dimensions of the right 5e drawer 36.5 x 50 x 31.5 cm. Dimensions of the left upper drawer 100 x 50 x 10.5 cm. Dimensions of the left 2nd and 3rd drawer 61.5 x 50 x 7 cm. Dimensions of the left 4th and 5th la 61.5 x 50 x 15 cm. Maximum capacity of the wheels 175 Kg. Per wheel. (Total 1050 Kg.) Maximum capacity per drawer 30 Kg. Own weight Approx. 125 Kg. Gjdpfxsu Imlbs Ag Rebg Packaging dimensions 167 x 66 x 106 cm.

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: red, driver cabin: other, gearing type: other, Year of construction: 2006, Equipment: central locking, crane, Vehicle location: Bovenden, emergency stop, foldable, 2-point hydraulic outriggers, radio remote control, four hydraulic extensions Load diagram: 4.6m-4195kg, 6m-3091kg, 7.90m-2254kg, 10.10m-1720kg, 12.20m-1398kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gbjdsi Rp T Ijpfx Ag Reg - .

Condition: used, Year of construction: 2013, operating hours: 1,631 h, Equipment: * Operating hours: 1,631 * Cab * Ditching bucket * 1 shovel * Well-maintained machine * Immediately ready for operation Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continually offer attractive financing options at special low rates. If interested, we are happy to prepare an individual offer for you! Trade-in of your commercial vehicle or construction machine is welcome. Gbodpfjundr Dex Ag Reg If a new TÜV inspection is desired, we will gladly provide an offer through our partner workshops. Please note: our offer does not generally include a new TÜV inspection. Delivery of your “new” commercial vehicle is possible via our external partners for an additional fee. The information provided in advertisements, online, price tags, and images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment may need separate verification. Subject to prior sale and errors.

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW Gbodem Rlb Njpfx Ag Reg weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Godpfx Aed I A Ausg Robg Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: excellent (used), fuel type: diesel, color: blue, lifting height: 64,000 mm, mast type: telescopic, Year of construction: 2008, operating hours: 6,034 h, General Information Year of manufacture: 2008 Technical Information Number of cylinders: 6 Drive: Wheel Unladen weight: 48,485 kg Godpfx Agjwudgqe Robg Functional Mast: Telescopic (5 sections) Mast length: 64 m Lifting capacity: 70,000 kg Superstructure brand: TADANO GR-700E-1-00211 ROUGH TERRAIN CRANE CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Year of construction: 2008, condition: used, Field of application: Freight transport Attachment suited for: Loading and unloading machines Please contact ATS Norway for more information Please provide reference number upon request: 20081 Specifications: 2008 model Weight: 750 kg Hydraulic pump Length: 12 meters Ready for delivery Gbsdpfx Agjw Ia Ngo Rog Description:2008 Palfinger PK 14080 C crane with hydraulic pump.The crane was overhauled when the owner purchased it.Ready for delivery. Own weight: 750 Model: PK 14080 C kran m/ hydraulikk pumpe

Condition: good (used), functionality: fully functional, fuel type: diesel, color: yellow, Year of construction: 1997, operating hours: 7,028 h, Product Description Used Komatsu Wheel Loader Manufactured by KOMATSU Model WA150-3 Hours 7003 hr Operates on Diesel Engine Machine as its condition Gbsdpfx Ajumq Hxog Rjg Please contact VIJAY JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm Gbedpsd Rxw Hsfx Ag Reg weight: ca. 1500 kg