Used Angle Gear for sale (19,566)

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Itodoh Ellzepfx Aacsn Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Year of construction: 2022, condition: used, Max. workpiece diameter: approx. 225 mm, travel distances: X-axis: max. approx. 500 mm, Z-axis: max. approx. 300 mm, control unit: REXROTH IndraControl V, 1 air filtration unit IFS E200D, year of manufacture: 2022, serial no.: 567880-3, net weight: approx. 160 kg, connected load: 400 V, 50/60 Hz, 0.85 kW, 2.5 A, 1 chiller unit RITTAL SK3334400, year of manufacture: 2022, serial no.: 2022K000051653, connected load: 3 phases, 380-415 V/50 Hz, 2.49 kW, flow rate: approx. 15 l/min, 1 coolant lubricant filtration unit FES AF2X4, 0KM/S, year of manufacture: 2022, serial no.: 38/22, tank volume: approx. 950 l, control unit: SIEMENS Simatic HMI Touch, 1 magnetic separator Iedpfexnairox Aacstn

Condition: used, Year of construction: 2013, Angle transfer 180°, manufacturer Venjakob VEN TRANS Technical data:- Type. VEN TRANS - Manufacturer: Venjakob - Year of construction:2013 - Max. part length: 5.500mm (part length 6,000mm on request) - Infeed roller conveyor Length: 6100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Infinitely variable feed rate - Cross transfer with carriage and lifting rake - Lifting-lowering, pneumatic - Length of transfer arms: 4600 mm - Number of rakes: 43 pieces - Distance between the rakes 140 mm - Outfeed roller conveyor Iedpfxjuu Shyj Aacotn Length: 6,100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Feed infinitely variable - Connected loads: - Electrical: 400 V, 50 Hz, 3 phases - Location: At the warehouse in D-32825 Blomberg

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: Stephan Werke, gear motor -Speed: approx. 110 rpm -Engine: Type ZD434 -Power: 2.2 kW 1430 rpm Itjdoptf Iaopfx Aacen -Design: B3 -Protection class: P 33 / E -Number: 1x motor available -Price: per piece -Dimensions: 640/270/H295 mm -Weight: 64 kg/piece

Condition: ready for operation (used), Year of construction: 2005, A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible. Ijdexltu Njpfx Aacotn

Condition: used, Year of construction: 1994, max. wheel diameter 1.800 mm gear width 000 mm control Sinumerik 840 C profile depth 80 mm grinding wheel diameter 400 mm grinding wheel width 80 diameter of spindle pin 140 mm length of spindle pin 45 mm radial slide travel 1.000 mm tangential adjustment 300 mm axial slide travel 1.000 mm table diameter 1.200 mm table hole 300 mm feed speeds X: 3.000 mm/min feed speeds Y : 5.000 mm/min feed speeds Z: 6.000 mm/min total power requirement 80 kW weight of the machine ca. 15 t Itsdpfx Aaov Santjcsn dimensions of the machine ca. 7,7 x 6,9 x 3,9 m electrics - voltage/frequency 400 / 50 V/Hz centering device

Condition: ready for operation (used), Year of construction: 1971, wheel width: 630 mm, table diameter: 630 mm, capacity: maximum diameter 630 mm, module 8 Isdpfx Aajxcpzgecjtn spare gears weight 7500 kg

Year of construction: 2023, condition: used, Axle distance: approx. 40-175 mm, max. test piece diameter: approx. 200 mm, net weight: approx. 110 kg, adjustable measuring force: approx. 1-11 N, power consumption: approx. 0.2 kW, control/switch FRENCO, serial number: 30020-000147, various measuring accessories, 1 operating panel, single-track/single-door, 1 DELL flat screen, approx. 22 inches, year of manufacture: 2022 Itodsxnamdspfx Aacsn

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 01.1821241101.0001.12, power: 11 kW (14.96 HP), input voltage: 400 V, overall weight: 476 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,850 mm, SEW-Eurodrive bevel gear motor including controller/converter. Included in the offer: - K97 DRE160MC4BE20HR/TF bevel gear motor - Control cabinet SEW-Eurodrive frequency inverter MDX61B0150-503-4-OT with MDX60A0150-503-4-00 SEW BW018-035 braking resistor with BST075-400V-00 braking module. Safety PLC from Pilz. (See type plates for further details.) Isdpfx Aetk Rq Aeacetn The system is connected via Profinet. Packaging and loading included.

Condition: good (used), Year of construction: 1997, Planetary gearbox, gearbox, gearbox for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, Itedpfjwx Ek Sjx Aacen -Manufacturer: Hydropa, gearbox for hydraulic motor -Type: EM1250 FE S45CR1 -Reduction ratio: 1 : 5 -Shaft: Ø65 x 105 mm -Hole shaft: Ø 100 / 94 mm -Number: 2x gearboxes available -Price: per piece -Dimensions: Ø 400 x 500 mm -Weight: 133 kg/piece

Condition: good (used), -KOM 1613- On offer here is a Gebr. Dickertmann hoist with a Demag chain hoist type PK2-F. Technical data chain hoist: Type: PK2-F Year of construction: 1968 With one load line: Itjdpfxjvca Ubj Aacjn Load capacity (kg): 250 Main speed (m/min): 10 Fine stroke speed (m/min): 2.5 With two load lines: Load capacity (kg): 500 Main speed (m/min): 5 Fine stroke speed (m/min): 1.25

Condition: good (used), Professional automatic packaging system from a renowned European manufacturer, consisting of two components, each with separate controls. The machines can be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household and toys, as well as textiles. Automatic L-sealer Smipack FP 560 A: - Automatic movement of the sealing frame - Automatic waste film winding - Automatic product discharge via the outfeed conveyor - Process start manually by hand button or foot switch. Alternatively, automatic process start possible by entering a time interval on the display. - Conveyor belt height continuously adjustable via hand crank - Sealing frame approximately 580 x 420 mm - Sealing frame movement driven by electric motor - Water-cooled sealing unit (closed system) - Maximum film roll diameter 300 mm - Maximum film width approx. 600 mm - Perforation possible via 2 adjustable needle rings - Roll holder separately adjustable - Product insertion separately adjustable - The machine can be moved or fixed in place using lockable castors Shrink tunnel Smipack T 450: - Tunnel opening approx. 450 x 250 mm - Temperature adjustable from 85 to 200 °C - Conveyor speed adjustable from 2.8 to 9.4 m/min - Via 4 deflection units in the tunnel, the hot air flows can be set separately for top and bottom - The machine can be moved or fixed in place using lockable castors Overall system dimensions including roller conveyor approx.: Length 3.4 m x width 0.9 m Multilingual documentation on CD, including operating instructions, spare parts lists, and wiring diagrams, is included in the scope of delivery. The system has been used very little and can be demonstrated under power. Isdpfx Aasw D Rugocjtn

Condition: used, Sheet lifter - Sheet clamp - Universal lifter Carrying clamp, beam clamp, lifting tackle for horizontal sheet transport Lifting gear for horizontal sheet transport DOLEZYCH type Dolast K15 Itjdpfx Asxciwzjacon Year of manufacture: 1997 Load capacity per clamp: 3 t Maximum load capacity: 6 t (for the twin lifting tackle) Clamping range: 0–51 mm Sheet thickness: 4–50 mm Wire rope length: 1.5 metres - Two-leg wire rope sling with eye - 2 lifting clamps included Own weight approx. 45 kg The lifting gear is suitable for lifting single steel plates or bundled sheet packs. Price quoted per lifting gear, 2 units available.

Year of construction: 2022, condition: used, Max. rolling force: approx. 400 kN, max. rolling speed: approx. 500 mm/s, max. workpiece length: approx. 300 mm, workpiece diameter: approx. 10–50 mm, control: PROFIROLL/RITTAL/SIEMENS Sinumerik 840D, 1 two-door steel cabinet, contents: various machine tools and spare parts, Note: further data to be researched Isdpfx Aaexnakcscotn

Condition: used, Year of construction: 2012, max. wheel diameter 600 mm gear width 600 mm profile depth 35 mm pivoting angle +/- 45 Grad grinding wheel speeds 600-6000 U/min dimensions of the machine ca. 5,1 x 6,5 x 3,7 m weight 17 t feeds X-axis 10000 mm/min feeds Y-axis 5000 mm/min feeds Z-axis 10000 mm/min table turning speeds 0 - 14 U/min control FANUC Series 30i-MODEL A Ijdpfxew Tm Tpj Aacetn CNC: Fanuc 30i Model A Maximum gear outer diameter: 600 mm Maximum module: 15 Maximum gear width (face width): 110 mm Number of teeth: 1 to 300 Wheel diameter: 20" (inches) Factory spindle: 630 rpm Tool holder: No. 60 Grinding spindle: 3000 rpm Automatic door lock Smoke and mist separator MPG: Handwheel (MPG = Manual Pulse Generator) Dressing tools for finishing, diameter 2.82" Without coolant device

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Eurodrive, gear motor with brake -Type: R43DT90S4BMG/HF/TF -Speed: 97 rpm -Power: 1.1 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Brake: 20 Nm -Number: 5x engines available -Price: per piece -Dimensions: 570/280/H210 mm -Weight: 33 kg Itsdpfx Aaechq Igjcjn

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: Frenco URM-K Typ HGM 38101, For sale here is a Frenco gear measurement machine URM-K (Universal Rotational Measurement with Measuring Balls), type HGM (Horizontal, Counter-Centre, Manual) from the year 2000. The device has been out of operation for a long time. When powered on, the error 'A disk read error occurred' appears. Price is negotiable. Iedpfjxli Acsx Aacstn

Condition: excellent (used), functionality: fully functional, overall weight: 78 kg, torque: 610 Nm, SEW-EURODRIVE R77 DRN112M4/TH 01.7437224601.0005.17 Inverter duty VPWM Ijdpfexllcfsx Aacstn V 230/400 Hz 50 r/min 1464/63 kW 4 S1 Nm 610 kg 78.532

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, table bore: 80 mm, table diameter: 145 mm, gear diameter: 125 mm, controller manufacturer: Siemens, controller model: SINUMERIK 840 D, TECHNICAL DETAILS Maximum wheel diameter: 125 mm Maximum module: 3 Maximum gear width (spur gears): 24 mm Center distance: -25 to +180 mm Maximum swivel angle: 12° Maximum helix angle: 45° Itedpfx Aajxf Azxjcen Table Table diameter: 145 mm Table bore: 80 mm Infinitely variable table speed: 0.03 – 50 rpm Shaper spindle Stroke rate (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaper spindle diameter: 85 mm Cutter holder mount: HSK 80 B Tool and workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control: SINUMERIK 840 D MACHINE DETAILS Electrical data Drive power: 7.5 kW Total power requirement: 30 kVA Weight and dimensions Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Swiveling counter-holder with 4 positions Automatic workpiece changing device Linear workpiece conveyor

Condition: used, Vertical milling head, milling head, angle milling head WMW HECKERT Year of manufacture: approx. 1985 Tool holder: SK 40 Quill stroke: approx. 85 mm Centre diameter at the flange plate: 200 mm Bolt circle diameter at the flange plate: Ø 175 mm Mounting threads at the flange plate: 4x M16 Itedpfexcbp Aex Aacjn - Head drive with splined shaft - SK40 adapter for head drive via splined shaft - Degree scale on the angle milling head 2x 90° - Draw bolt for tool holder with M16 - Solid intermediate flange for adapting to a WMW FW 250x1000 milling machine Dimensions L x W x H: 530 x 380 x 240 mm Total weight: 95 kg In good condition

Year of construction: 1970, condition: used, Cordia S26 Gear Drilling Machine Drilling capacity in steel (diameter) 26 mm throat 280 mm Drilling stroke 100 mm Total power requirement 1000 Watt , 380 V Machine weight approx. 355 kg Space requirement approx. 1060 x 1000 x 2100 incl. base plate mm Height max .500 mm Ijdpfem Sg Rkex Aacotn Table surface 330 x 270 mm Number of spindle rotation 6 steps spindle speeds 95 - 1450 rpm Control conventional

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor -Manufacturer: ABM Greiffenberger, gear motor 4 rpm -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Design: B5 -Shaft: Ø 65 x 105 mm -Protection class: IP 54/55 Itedpsxamghsfx Aacen -Dimensions: 705/305/H400 mm -Weight: 106 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Bonfiglioli, gear motor -Speed: 22.5 rpm -Gearbox: Type VF30 N P56B14 i= 60 Itjdpexal Udofx Aacsn -Motor: Type BN 56 B4 0.09 kW -Design: B3 angle -Hollow shaft: Ø 14 x 55 mm -Protection class: IP 55 -Number: 3x gear motor available -Price: per piece -Dimensions: 260/145/H120 mm -Weight: 4.1 kg/piece

Condition: good (used), gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Bonfiglioli, gear motor -Gearbox: Type 200220031 MVF 27/F 210 rpm Iedjvzxytopfx Aacjtn -Engine: Type BN 27C 4 -Power: 0.09 kW -Design: B14 angle -Shaft: Ø 9 x 28 mm -Protection class: IP 55 -Dimensions: 263/150/H110 mm -Weight: 3.5 kg

Condition: good (used), Globoid gear, indexing, oscillator indexer, index gear, rotary index drive Itodpfx Aswz Idtoacjn -Manufacturer: CAMCO, index gear -Type: MSHV40A917-Y7A -Overload clutch: 11FC-SD -Shaft: Ø 55x45 / 35x80 / 35x75 mm -Translation: 20 rev. = 90° -Dimensions: 815/720/H585 mm -Weight: 327 kg