Used Amada for sale (206)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Todpfx Acoyn Nybo Teb Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Tjdpfopy Uzyex Ac Tob Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: excellent (used), Technical Data: Working length: 3100 mm Distance between uprights: 2560 mm Pressing force: 220 t CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Bending simulation automatic crowning motorized adjustable backgauge Throat depth: 650 mm Stroke: 200 mm Working height: 960 mm Laser safety system: FIESSLER Motor power: 17 kW CE marking Dimensions (LxWxH): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons Accessories: 1 set of tooling: 1 upper tool 120 mm 1 lower tool, segmented die: V 50, 35, 22, 16 Condition: Very good condition, complete overhaul in 2026 Tedpfxsyzm Nhs Ac Tob The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are age-appropriate; used machines are sold without any warranty.

Condition: excellent (used), Technical data: Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm Tjdpfxsyxvgqs Ac Teb NC control: OPERATOR Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2007, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Max. cutting capacity for aluminium: 8.0 mm Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Tjdpfx Acoywd Ndo Tob Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2000, Technical specifications: Todpfxjyi Updj Ac Teb Working length: 3100 mm Frame width: 2760 mm Press force: 170 t CNC control: OPERATOR Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 410 mm Stroke: 200 mm Working height: 960 mm Motor power: 16.5 kW CE mark Dimensions (Length x Width x Height): approx. 3500 x 2200 x 2900 mm Weight: approx. 11 tons Accessories: 1 pc. new upper tool 1 pc. new 4-sided die The seller is not liable for any typographical or data transmission errors. The machine is provided in a condition appropriate to its age for appearance, technology, and wear; used machines are sold without any guarantee or warranty.

Condition: excellent (used), Year of construction: 1999, Technical data: Tsdpfjvrh Rcox Ac Teb Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Crafter Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: The machine is in very good condition You can find more machines on our homepage. The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Column width: 2650 mm Tjdpsv I Sp Ijfx Ac Tob Press force: 100 tons CNC control: AMADA AMNC PC 3D-graphic 15-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Dual speed of the X, R, and Z axes Automatic crowning Motorized adjustable backgauge Thrust: 550 mm Stroke: 350 mm Working height: 960 mm Laser monitoring: FIESSLER Motor power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: Revision in 2024 Working length: 3100 mm Column width: 2760 mm Tsdev Tcnlopfx Ac Tob Press force: 220 tons CNC control: OPERATOR II Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Motorized adjustable backgauge Thrust: 650 mm Stroke: 200 mm Working height: 960 mm Motor power: 17 kW CE mark Dimensions (length x width x height): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, operating hours: 70,104 h, pressing force: 81 t, total length: 3,100 mm, total width: 2,180 mm, total height: 2,540 mm, overall weight: 5,750 kg, working width: 2,550 mm, Equipment: emergency stop, We offer this ready-to-use Amada HFBO 80-25 press brake, year of manufacture 1999. If you have any questions or need further information, please feel free to send us a message or give us a call. The seller accepts no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty. Tedsy H Eqbepfx Ac Tjb

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Todexn Rviopfx Ac Teb Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, We are selling a beautiful high-precision surface grinding machine from AMADA. The machine has low operating hours and is available for demonstration under power at the seller’s location. The machine’s enclosure has been completely renewed and it is in very well-maintained condition. Technical Data: Clamping surface: 550 x 200 mm Travel paths: 600 x 250 mm Height to spindle center: 90 to 400 mm Standard magnetic chuck size: 400 x 200 x 100 mm Grinding wheel size: 225 x 25 x 31.75 mm Grinding wheel speed: 500 – 5000 rpm Year of manufacture: Nov. 2016 Installation dimensions and weight: 2700 x 2400 x 1900 mm // Weight: 2400 kg Machine equipment: Tjdsyx A Nfepfx Ac Tjb - FANUC Series 32i-Model B control - Machine enclosure (new) - Flanges - Dressing spindles (profile and groove grinding) - Belt filter - Integrated probe - Linear drive - Automatic balancing MPM - Ball screws and linear drive

Condition: used, Year of construction: 1998, pressure 100 t chamfer lenght 3100 mm distance between columns 2750 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 600 mm R1 and R2 axis controlled by cnc 150 mm Z1+Z2 axes controlled by cnc 0-2500 mm Quick speed,inspeed 100 mm/sec opening speed 0-10 mm/sec Todpeyw Tl Uofx Ac Tsb Number of working hours 8500 h length 3600 mm width 1900 mm height 2600 mm weight 6750 kg total power requirement 9 kW dimensions of the machine ca. 4x2x3 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 1999, pressure 100 t chamfer lenght 3100 mm distance between columns 2750 mm Tedpfsyw Tl Iox Ac Tob Stroke beam 180 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 600 mm R1 and R2 axis controlled by cnc 120 mm Z1+Z2 axes controlled by cnc 300-2700 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 29000 h length 3500 mm width 1950 mm height 2550 mm weight 6700 kg total power requirement 8 kW dimensions of the machine ca. 4x2x2,5 m Control CNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Year of construction: 2004, condition: used, table length 1250 mm table width 1250 mm burner heads 1 Control Fanuc output 1000 Watt travel -z axis 100 mm travel x / y 1260/1260 mm traversing speed 30/30/42 mm/sec Tjdpfohly Hlex Ac Tsb gas consuption 10 Liter/Std. total power requirement 22 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 10 m

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm width 1800 mm Tedpfxsxyzzao Ac Teb height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 2006, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm max travel X-axes 700 mm Z1+Z2 axes controlled by cnc nein, manuell 4 finger mm Todpfx Aotv Rlbec Tjb max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 43000 h length 3100 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m Control Amada OP2002 All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 2,600 h, controller model: Fanuc 32 C, control type: CNC control, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Todpew I Tt Sofx Ac Tob Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: good (used), Year of construction: 1990, pressing force: 50 t, throat depth: 420 mm, total length: 2,100 mm, total width: 1,400 mm, total height: 1,900 mm, overall weight: 3,450 kg, distance between stands: 1,530 mm, Bending length 2050 mm, capacity 50 to, gap between column 1550 mm, stroke 200 mm, throat gap 300 mm, motor 5 KW, back gauge motorized, dimension 2100x1400x1900 mm, weigth ca. 3450 kgs Tsdpfx Aev Axpwoc Tsb

Condition: used, Year of construction: 2015, Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg Standard configuration - Patented servo-electric double drive- Punching force 300 kN- 32 tool stations (4 rotatable stations)- max stroke rate: 400- max material thickness 6mm- Automatic focus adjustment- Automatic gas pressure control- HS sensor cutting head- Nozzle cleaning- Splash guard- Good parts flap Extended machine accessories Todpfx Aceypt R Hs Tsb - TSU tool changer 300 Automation

Condition: good (used), Year of construction: 2002, Technical specifications Ø: 700 mm Todpfx Ajv Tzvhoc Tjb Rectangular: 800 x 700 mm

Condition: ready for operation (used), control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 10 mm, total length: 4,600 mm, total width: 2,520 mm, total height: 1,850 mm, Equipment: angle stop, foot remote control, Sheet metal shear Amada GH1040 Z New blade set Tjdpfx Aox Igndoc Tob Fully functional Hydraulic cylinders were overhauled approximately 6 months ago.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, stroke length: 350 mm, controller model: Amada Operator, bending force (max.): 320 t, working length: 4,100 mm, TECHNICAL DETAILS Tedpjxwnxtofx Ac Tob Press force: 320 t Bending length: 4,100 mm Stroke: 350 mm MACHINE DETAILS Control: Amada Operator Total power requirement: 32 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,600 x 3,400 mm Machine weight: approx. 23,500 kg EQUIPMENT Amada quick-change tool holder Amada lower tool holder Controlled axes: y1, y2, x, r, z1, z2 Rear safety doors Two-hand foot operation

Condition: good (used), Year of construction: 2002, functionality: fully functional, punching force: 20 t, TECHNICAL DETAILS Machine capacity: 200 kN (20 t) Air pressure: 5 bar Air flow rate: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travelling ranges: Machine travel range without repositioning: 1,250 mm x 2,100 mm Processing Max. sheet thickness with ball bearing table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling cycle, feed 1 mm: X920 / Y920 Todoy Symuopfx Ac Tsb Tools Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS pressing force: 170 t bending length: max. 3340 mm stroke: 180 mm distance between the uprights: 2700 mm MACHINE DETAILS weight: 11.000 kg space requirement: 3720 x 2180 x 3170 mm Tjdpfxemkhyns Ac Teb