Used Amada Emz for sale (221)

Condition: good (used), sheet width 2540 mm Ihedpfx Ajxn Tx Hog Uot plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,574 h, punching force: 20 t, total height: 2,082 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, overall weight: 13,000 kg, controller manufacturer: AMADA, controller model: AMNC-F, product length (max.): 4,165 mm, General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Main Drive Punching force 200 Kn Dimensions Machine Length 4165 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1270 mm This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information. Ihodpfx Agex E Ecuo Ujt Application Types Punching

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, controller model: Amada Operator, bending force (max.): 320 t, stroke length: 350 mm, working length: 4,100 mm, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Stroke: 350 mm Isdpjxwnxtjfx Ag Uoht MACHINE DETAILS Control: Amada Operator Total power requirement: 32 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,600 x 3,400 mm Machine weight: approx. 23,500 kg EQUIPMENT Amada quick-change tool holder Amada lower tool holder Controlled axes: y1, y2, x, r, z1, z2 Rear safety doors Two-hand foot operation

Condition: refurbished (used), functionality: fully functional, Shear Brand: AMADA PROMECAM Model: GP1230 Capacity: 3000 x 12 Back gauge: 1000 mm Ihodpfxjxfbb Ro Ag Uot Rear pneumatic sheet support Cylinder seals replaced – Blades sharpened – In compliance

Condition: used, Cutting length: 3100 mm Steel cutting capacity: 12 mm Backgauge: 1000 mm Ihedpfoxuh Ipjx Ag Uet

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 12,096 h, Amada hydraulic press brake type HFT 130-3 working width 3100 mm max. pressing force 130 tons CNC-controlled Y1 Y2 X and R axes CNC control CNC OP 2000 Fiessler light curtain Drive power 12.5 kW Weight 8200 kg Isdpfx Ajxhfuysg Ujht

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,450 h, machine/vehicle number: LST3015F1 / 30158295, control type: CNC control, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, For sale is a high-performance and reliable CNC laser cutting machine from AMADA, model FLC3015AJ with a 2 kW fiber laser source, manufactured in December 2017. The machine is fully operational, in good condition, and ready for immediate use. This system is perfectly suited for precision metalworking, and comes fully equipped with extensive accessories such as an extraction unit, pallet changer table, chiller, and light protection system. Technical Data: • Manufacturer: AMADA • Model: FLC3015AJ Fiber Laser 2000 • Year of manufacture: 2017 • Laser power: 2,000 W (fiber laser) • Working range (X/Y): 3,070 × 1,550 mm • Machine weight: approx. 11,200 kg • Control: AMNC 3i with 21” monitor • Pallet changer: AMADA LST3015F1, 3,000 kg, YOM 12-2017 • Extraction system: Herding Comp 1500-8/9 SB, 7.5 kW, YOM 2018 • Chiller: KKT Chillers YBOXX 12, YOM 2018 • Laser welding source: AMADA AJ2000, 2.1 kW • Connected load: max. 8.8 kVA • Safety features: Light curtain protection system ✅ Condition and Notes: • The machine is in well-maintained, used condition • Fully operational and regularly serviced • Includes full equipment package for immediate commissioning • On-site inspection and testing can be arranged by appointment — Location for inspection and pickup: 12277 Berlin Price: €115,000 net plus 19% VAT Ihodpfxjxftpaj Ag Uet or Net Export Pickup only – disassembly and transport to be managed by buyer or upon agreement If interested or if you have any questions, please feel free to send me a message. Additional photos and technical details available upon request. All information provided without guarantee, subject to errors and prior sale. Net export price. For domestic deals, plus 19% VAT. For further questions, please call or email. We accept trade-ins and can offset the value of your used vehicle. We also accept defective vehicles, those due for TÜV, or with damage as down payment or part exchange. Trucks, cars, vans, and construction machinery. Just contact us. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype For an extra fee, we handle all customs and registration formalities. We can also arrange transport to the port at additional cost.

Year of construction: 2008, operating hours: 12,866 h, condition: ready for operation (used), General Data Machine weight 7500 kg Measurements height 2789 mm Main Drive Laser power 2 kW Control Unit Brand AMADA Dimensions Machine Length 5745 mm Ihodpfxsx D Hh Ho Ag Uot Table Table load 330 kg This AMADA LC-2415 ALPHA IV was manufactured in 2008. A CO₂ laser cutter with a 2.0 kW power rating, it handles a working area of 4000 mm × 1550 mm. It can cut steel up to 10 mm, stainless steel up to 8 mm, and aluminium up to 3 mm. With a table load capacity of 330 kg and a total weight of 7.5 tons, it remains operational and testable. Contact us for more information about this machine. Application Types Cutting

Condition: good (used), functionality: fully functional, Year of construction: 1999, Press force 320 t Bending length 4100 mm Stroke 350 mm Total power requirement 32 kW Machine weight approx. 23,500 kg Ihsdpfx Aexu Na Tog Uet Space requirement approx. 4300x2600x3400 mm Equipment: -CNC control Amada Operator -Quick-change tool holder Amada -Bottom tool clamping Amada -Controlled axes: y1, y2, x, r, z1, z2 -Rear safety doors -Two-hand foot control

Condition: good (used), Year of construction: 1987, operating hours: 42,846 h, machine/vehicle number: P2440355, CNC turret punch press with 24 stations Control: FANUC 6M Operating hours: 42,846 h Spindle motor: 5.5 kW Capacity: 20 tons Number of stations: 24 Material thickness: 6.35 mm Hole size: 88.9 mm Sheet size WITHOUT REPOSITIONING: 1000 x 1000 mm WITH 1 REPOSITION: 2000 x 1000 mm Max. sheet weight: 50 kg Speed: 30 rpm Stroke rate: 200 strokes per minute Net weight: 8,500 kg Ihjdpfoxqr Sqsx Ag Ust Dimensions (L x W x H): 4,500 x 3,200 x 2,200 mm

Condition: used, Year of construction: 1995, Used notching machine from FIM (Amada branded) Type: Goal 204 Capacity: 200 x 200 x 4 mm 90 degree angle Year of manufacture: 1995 Ijdpfewr Aaksx Ag Usht

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Ihodpfx Agjtwliwe Ujt Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Ijdpfxjxn Rvij Ag Usht Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: ready for operation (used), Year of construction: 2001, overall weight: 9,200 kg, pressing force: 20 t, stroke length: 1,350 mm, controller manufacturer: AMADA, General Data Machine weight 9200 kg Control Unit Brand AMADA Main Drive Pressing force 200 kN Ijdpox D If Hofx Ag Usht Stroke 1350 mm Additional Equipment Next to the machine, there are 2 tool cabinets This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine. Application Types Punching

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 400 mm, installation height: 650 mm, operating speed: 7 mm/s, reverse speed: 55 mm/s, total length: 8,400 mm, total width: 3,100 mm, total height: 4,620 mm, power: 47 kW (63.90 HP), travel distance Z-axis: 300 mm, empty load weight: 90,000 kg, passage width: 7,210 mm, table width: 350 mm, - 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Iodpowu Inlofx Ag Ueht Locking speed: 70 mm/sec Power needed: 380V

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Iedpfx Asxv A E Sog Ueht

Condition: good (used), Year of construction: 2005, Gebruikte 3 meter Amada CNC kantbank Type: HFP 130 3 Capaciteit: 3100 x 130 ton Iodpfowz I Irsx Ag Ujht 8-assig (Y1, Y2, X1, X2, R1, R2, Z1 en Z2) Bouwjaar: 12-2005 Automatisch Fiessler Alas lasersysteem Euro-stijl gereedschapsklemming met laswisseladapters

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm Ihjdjxabutepfx Ag Uet column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Year of construction: 2005, condition: ready for operation (used), General Data Measurements width 2020 mm Measurements depth 4025 mm Measurements height 2900 mm Machine weight 11800 kg Control Unit Brand AMADA Model CD 2005 Main Drive Spindle motor power 16.5 kW This 4-axis AMADA HFT 170-3 press brake was manufactured in 2005. It features a pressing force of 170 tons, a bending length of 3100 mm, and is equipped with AMADA CD 2005 CNC control. Despite a non-functional hydraulic pump, its main motor power is approximately 16.5 kW. Consider the opportunity to buy this AMADA HFT 170-3 press brake. Contact us for more information about this machine. Application Types Ihsdpex D Nn Nefx Ag Ust Bending

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours Ihedpfx Aoxabgpeg Uet - in checked condition - machine video - ?v=APP0HZjMms4 Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Year of construction: 2008, operating hours: 24,490 h, condition: ready for operation (used), General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Ihjdsx D Em Iopfx Ag Ust Dimensions Machine Length 4165 mm Main Drive Punching force 200 Kn This AMADA AC2510 NT was manufactured in 2008. It features a punching force of 200 kN and a turret capacity of 51 stations. It can handle sheet sizes up to 1270 × 5000 mm and thicknesses up to 3.2 mm. The machine supports a maximum sheet weight of 150 kg and offers high-speed turret indexing. If you are looking to get high-quality punching capabilities, consider the AMADA AC2510 NT machine we have for sale. Contact us for more information. Application Types Punching

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW Ihjdpfjxaa N Njx Ag Ujt weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Ihedpjx D H I Hofx Ag Ust Brand AMADA Main Drive Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 2840 mm Measurements depth 9997 mm Measurements height 2166 mm Machine weight 11200 kg Movement X-Axis Movement 3070 mm X-Axis Rapid Traverse 170 m/min Y-Axis Movement 1550 mm Y-Axis Rapid Traverse 170 m/min Z-Axis Movement 100 mm Workpiece Ihsdpfxjx D Eipj Ag Ust Workpiece weight 920 kg Max Material Thickness Steel Up to 19 mm Stainless steel Up to 9.5 mm Aluminium Up to 8 mm Additional Equipment Laser Oscillator: AF3500i-C CO₂, 3.5 kW This AMADA LCG-3015 was manufactured in 2014. It features a CO₂ laser oscillator AF3500i-C with 3.5 kW power, capable of cutting up to 19 mm mild steel, 9.5 mm stainless steel, and 8 mm aluminum. The machine supports a maximum workpiece weight of 920 kg and has rapid feed rates of 170 m/min. For more information about this machine, please reach out to us. Application Types Cutting

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 3200 mm Measurements depth 6400 mm Measurements height 2500 mm Machine weight 11000 kg Table Table load 1200 kg Tools Number of index 30 Iedpfx Ajx D Na Eog Uoht This AMADA MEISTER G3 was manufactured in 2013. A robust surface grinding machine, it's ideal for precision metalworking. Consider the opportunity to buy this AMADA MEISTER G3 surface grinding machine. Contact us for more information. Application Types Grinding