Used Aluminum Saw for sale (10,305)

Condition: new, Year of construction: 2025, - Saw blade 400 mm - Double mitre - 4 pneumatic clamps Hjdpjgg N Axefx Ampel - Mist lubrication system - Roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400 V

Condition: new, Year of construction: 2026, Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swivel range of 45° to the left and 22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! Hedpfx Amjpa Nxajpsl Equipment Double mitre machine with powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Large mitre range from -22.5° to +45°, Swivel range 67.5° - 0° - 45° Automatic miter adjustment, fixed stop functions at -45° / 90° / +45° and two variable stop functions adjustable to the desired angle! Two horizontal pneumatic clamping cylinders Clearly arranged control panel Large protective hood covers the entire working area, is lifted pneumatically Adjustable blade and cutting feed Connections for extraction system Minimal lubrication system Air gun for cleaning the machine Saw blade ø 450 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the clamping vice and remove or advance the material Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default Hsdpfx Asidun Ismpel this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 800 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Hjdpfx Amegwt Rvepol

Condition: new, Year of construction: 2026, Aluminum circular saw UK 350 M, manual (MG TL-350-M) The UK 350 M is a manual table saw with simple, safe operation! With this machine double miter cuts up to 45° right and left are possible. The miter adjustment is done here by turning the stop jaw. The UK 350 M has a compact design with clear operation. The saw cut is made manually from below into the material to be processed. The material is stretched manually. Fixed protection from the cutting area. equipment Compact, closed design with clear operation Manual clamping device Fixed protection from the cutting area Saw blade ø 350 mm workflow Hsdpsidqk Sefx Ampel 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! without base (optionally available) ! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 300 M, manual The UK 300 M is a manual table saw with simple, safe operation. Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300 M has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched manually. Hodpfxjidqaho Ampol Fixed protection from the cutting area. equipment Compact, closed design with clear operation Manual clamping device Fixed protection from the cutting area Saw blade ø 300 mm Manual cutting feed Miter adjustment left 45º / 90º / right-45º degrees integrated manual length stop ideal for mobile use ideal for profile cuts workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! without base (optionally available) ! It is always possible for you to inspect the desired machine in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The UK-350-P is a manual table saw with simple, safe operation! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK-350-P has a compact design with clear operation. The saw cut is made manually from below into the material to be processed. The material is clamped pneumatically. Fixed protection from the cutting area. Hjdegcbuwepfx Ampsl

Condition: new, Year of construction: 2026, Aluminum circular saw UK 300 P, manual The UK 300 P is a manual table saw (pneumatic clamping) with simple safer Service! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300P has a compact design with clear operation. The saw cut is done manually by Hedpfoidqbbjx Ampjl down into the material to be processed. The material is clamped using two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimum lubrication system and a fixed guard in front of the cutting area. equipment Compact, closed design with clear operation two pneumatic clamping cylinders Fixed protection from the cutting area Saw blade ø 300 mm Manual cutting feed Mist spray device for air-oil cooling workflow 1) Setting the cutting angle 2) Loading the material 3) Pneumatic clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Hjdpfedzp T Dsx Ampjl Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fully automatic operation Hodjyvtyvspfx Ampjl Drive 7.5 kW, S6, 400 V, 50Hz, 2850 rpm For use with saw blades D 550 mm Cutting range 270x140 mm (width x height), D 185mm Max. profile width 270mm Control unit with display Including piece counter Including reversing device for a maximum cut length of 3000mm Automatic shut-off via limit switch when material ends Hydropneumatic saw blade feed, continuously adjustable, from bottom to top Vertical and horizontal clamping units, on both infeed and outfeed sides of the saw head Pneumatic dosing spray device Cutting gap extension on both sides of the saw blade Electronic material feed unit 3-600mm feed length, with ball screw spindle and servomotor Including pneumatic horizontal and vertical clamping device Remnant piece from 75mm, depending on profile 2 extraction ports D 100 mm Safety guard over the saw head and feed unit A suitable extraction system can also be offered!

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Hsdpfjtwn E Ujx Ampol Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: new, Tubend aluminum circular saw / underfloor saw AC 550 Special equipment included in the price: Pneumatic vertical and horizontal clamping by 4 clamping jacks Feed of the saw blade steplessly adjustable Minimum quantity lubrication 3m roller conveyor Hjdpfjkckx Ujx Ampel Description saw blade diameter: 550 x 32 x 4 mm speed 3580 rpm Cutting area 90° rectangular 260 x 200 mm Cutting area 90° square 155 x 155 mm Cutting area 45° rectangular 180 x 200 mm Cutting area 45° square 130 x130 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 3 kW Machine weight approx. 250 kg

Condition: new, Tubend aluminum circular saw / underfloor saw AC 400 Hodpfx Aokckgvompsl Special equipment included in the price: Pneumatic vertical and horizontal clamping by 4 clamping jacks Minimum quantity lubrication 3m roller conveyor Description saw blade diameter: 400 x 32 x 4 mm speed 3000 rpm cutting area 90° rectangular 150 x 100 mm Cutting area 90° square 120 x 120 mm Cutting area 45° rectangular 130 x 80 mm Cutting area 45° square 100 x100 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 1,5 kW Machine weight approx. 140 kg

Condition: new, saw blade diameter: 550 mm, sheet thickness aluminum (max.): 4 mm, total length: 1,130 mm, total width: 980 mm, total height: 1,430 mm, cutting range round steel at 90°: 155 mm, cutting range round steel at 45°: 130 mm, rotational speed (min.): 3,580 rpm, rotational speed (max.): 3,580 rpm, The Gerd Wolff AC 550 is an automatic aluminium cutting machine, manufactured in Turkey by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik". CUTTING CAPACITY: Cutting range 90° round: 155 mm Cutting range 90° square: 155 x 155 mm Cutting range 90° rectangular: 260 x 200 mm Cutting range 45° round: 130 mm Cutting range 45° square: 130 x 130 mm Cutting range 45° rectangular: 180 x 200 mm Standard equipment: - Indexing positions for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for various profile types - Saw cover with safety switch - Belt-driven saw - Two-hand safety operation Hodpoxb Urnofx Ampel - Easy-to-replace saw blade - 2x pneumatic vertical clamps with pistons - 1x air blow gun Optional equipment: - Hydrocheck – hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, saw blade diameter: 400 mm, sheet thickness aluminum (max.): 4 mm, total length: 720 mm, total width: 760 mm, total height: 1,330 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 100 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 3,000 rpm, The Gerd Wolff AC 400 is an automatic aluminium cutting machine, manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned producer in Turkey. Standard Equipment - Fixing points for 15° - 22.5° - 30° - 45° - 67.5° - Locking handle for securing at intermediate angles - Adjustable cutting speed for various profile types Hodpfx Amjxb Ur Uepel - Saw guard with safety switch - Belt-driven saw - Two-hand safety operation - Easily replaceable saw blade - 2 pneumatic vertical cylinders with clamps - 1 compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed regulation for aluminium profiles - Cooling system for cutting aluminium - Auxiliary conveyor with measuring rulers

Condition: used, Year of construction: 1999, machine/vehicle number: 012563001, rotational speed (max.): 3,600 rpm, input voltage: 400 V, For cutting aluminum profiles with miter cuts Year of manufacture: 1999 Advance payment Transport costs not included Hedpowl Uzyofx Ampsl

Condition: like new (used), Year of construction: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Blade cutting speed: 1700/3400 rpm Cutting angle: from -45° to +45° Cutting capacity: at 0° – round: 120 mm, square: 105 mm, rectangle: 180x70 mm Hjdpfxswu Tz Re Ampsl Touchscreen Machine weight: 605 kg

Year of construction: 1983, condition: used, Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device Hsdpfx Aed Ixn Rsmpel -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

Condition: used, Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm Hsdpfoc Ir Dvsx Ampel -Weight: 238 kg

Condition: used, Aluminum circular saw, miter saw, glass bead saw, aluminum saw, underfloor aluminum miter saw machine -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 350 mm -Drive: kW -Speed: 900/1700 rpm Hodpfx Amscmtnmopol -Dimensions: 900/520/H1280 mm -Weight: 150 kg

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, – 400 mm saw blade – Double mitre – 2 pneumatic clamps – Mist lubrication system – Air blow gun – Protective cover Hedpfx Amogg N Dropol – Documentation – 400 V

Condition: excellent (used), saw blade diameter: 400 mm, – 400 mm saw blade – Double cut / double miter Hedpfx Aowlwa Sompjl – 4 pneumatic collets – Hydrocheck – Mist lubrication system – Blow gun – Protective hood – 400 V

Condition: good (used), Aluminum circular saw, miter saw, glass strip saw, aluminum miter saw, metal miter saw, compound miter saw -Processing: of flat, angle and solid materials, pipes and special profiles -Saw blade: Ø 350 mm -Drive: 2.3/3 kW Hedpfx Ameb A Sgwjpsl -Speed: 1430/2860 rpm -Dimensions: 800/900/H1600 mm -Weight: 260 kg

Condition: used, Year of construction: 2007, Technical data: Speed: 2800 1/min Saw blade: ø 380 mm Hsdpfx Amjrwlwvepsl Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Condition: new, saw blade diameter: 400 mm, – 400 mm saw blade Hodpfxjwg Sm As Ampel – Double miter – 4 pneumatic collets – Automatic safety guard – Mist lubrication system – 1 x 300 cm roller conveyor with length stop – Front door for easy saw blade changes – Air gun – Safety guard – Documentation – 400 V