Used Aluminum Perforated Sheets for sale (14,013)

Condition: used, Technical Data / Dimensions Available Quantity: 2 Volume: approx. 115,000 liters Container Type: Silo Condition: Used Food Grade: No Design: Vertical Internal Diameter: approx. 3,000 mm Cylindrical Height: approx. 15,600 mm Total Height: approx. 18,000 mm Weight: approx. 2,700 kg Specific Weight of Medium: 0.6 t/m³ Operating Pressure: Unpressurized Ground Clearance: approx. 1,000 mm Material / Properties Cedpfowfrgyex Adxshd Inner Casing Material: Aluminum Notes: Material: AlMg3 / AlMgSi Standing Type: Base Ring/Stand Frame Fastening: Fixed Top Bottom Type: Conical Grade: approx. 15% Bottom Bottom Type: Conical Conical Inclination: 90 degrees Top Bottom: 1 x Roof edge railing, height: 1,200 mm 2 x crane eyelets 1 x flanged connection DN 80 (filling) 1 x flanged connection for silo pilot 1 x venting connection Various connections for measurement and control technology Shell: 1 x service room door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 80 8 x pipe holders Subfloor: The silos end at the bottom in a 90° cone with a flange

Condition: new, Year of construction: 2024, Underfloor light metal circular saw Make: METALLKRAFT Model: ULMS 420 Codpfx Adjtuch Eoxshd Item no.: 3627420 Condition: New machine Cutting area (square): 120 x 120 mm Speed: 2900 rpm equipped as standard with: - Saw blade 420 x 30 x 4.0 mm Z 120 - minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction sockets for connection to an extraction system - Operating instructions

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, saw blade diameter: 550 mm, input voltage: 400 V, For sale is a Wegoma Urania double miter saw from 2017. The saw is fully functional. Cedpfx Adeva E S Hsxohd We assume no liability for incorrect information! Machine must be picked up. If you are interested, the machine can be viewed by appointment.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2875, saw blade diameter: 500 mm, feed length X-axis: 180 mm, feed length Y-axis: 155 mm, feed length Z-axis: 6,000 mm, total length: 9,000 mm, total width: 2,700 mm, total height: 1,700 mm, rotational speed (max.): 2,800 rpm, overall weight: 1,500 kg, pivoting range: 45 °, compressed air connection: 6 bar, Equipment: cabin, documentation/manual, rotational speed infinitely variable, The TK 804/1 is an automatic system for processing and cutting aluminum profiles, designed to minimize manual interventions by the operator throughout the entire work cycle, limiting them solely to loading and unloading the profiles. The machine can be equipped with up to four electrospindles, which enable drilling operations on the profiles before they are cut. Chedpfx Aowuuansdxsd

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Year of manufacture: 2018 Machining length: 7,200 mm 3-axis control with 15" monitor Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Cjdpfx Ajwynitedxshd Safety light curtain at the front and lateral safety fence Minimum quantity lubrication system Centralised lubrication system Thread cutting without compensating chuck Easy programming via hand control unit High-speed spindle up to 18,000 RPM Includes 3 angle heads X-Axis [mm]: up to 7,200 / 7,200 Y-Axis [mm]: up to 485 / 310 Z-Axis [mm]: up to 340 / 260 Traverse speed X/Y/Z-Axis [m/min]: 60/60/60 Max. milling cutter diameter: 25 mm Max. saw blade diameter: 180 mm Max. tool length: 200 mm (tool + holder) Max. spindle speed: 6,000 RPM Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular sawing machine VELOX 350 VA-MPS fully automatic hydropneumatic machine Csdpfx Aorpiu Djdxohd For saw blades up to 350 mm Ø, miter left + right 45° and bevel cuts up to 45° left + right. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45°L 65mm round, 60mm square, 180x50mm flat - 45°R115mm round, 100mm square, 150x80mm flat Standard equipment: - State-of-the-art micro-processor control with multifunctional display - Safety package with the following functions: 1. minimum input pressure monitoring 2. vice monitoring/material clamping - Hydro-pneumatic control of the saw head - Pneumatic double clamping device - Pneumatic vertical clamping device - Electro-pneumatic material feed unit - Nonius for fine length adjustment - Integrated coolant spraying device - Connecting piece for chip extraction system Speed 3600 min-1

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Aluminum silo standing on foot ring (plastic granulate (PP) storage silo) - second-hand - designed for a bulk density of 0.8 kg/dm³ Volume: 120,000 liters Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 20,000 mm Total height: approx. 21,250 mm (incl. 1,250 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Roof pitch of the upper floor: 15° Equipment and connections: In the top floor: 1 x DN 600 access and ventilation opening with cover 2 x flange DN 100 (filling spout + Silopilot) 1 x 1 1/2" threaded socket (full detector) 1 x roof edge railing with handrail Codpfx Aou I U D Sodxehd 2 x crane eyes In the shell: 1 x access door 850 x 1800 mm 9 x pipe holder ø 108 mm for filling pipe 1 x DN 100 filling pipe, ending in TW connection at the bottom 1 x cable protection pipe DN 50 Various pipe penetrations in the area of the lower standing frame The silo has a 60° cone at the bottom, which ends in a DN 500 flange. On the underside/cone: 1 x suction cost 1 x 1 x 1 1/2" threaded socket (empty indicator) The currently connected measurement and control technology is included in the above offer. However, no warranty is given for their warranty is assumed! A three-part access ladder with back protection is optionally available (surcharge: € 1,950) Otherwise as per pictures and drawing.

Condition: new, Year of construction: 2024, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Chedpfx Adekqz H Dexod

Condition: new, Year of construction: 2025, 3 NC axes for length as well as electronic tilting of the saw blades outwards 22.5° and inwards 135° Cutting length 5000mm Processing of individual cuts Processing of cutting lists Creating cutting lists via keyboard Import of cutting lists via USB storage device or over network Corner angle automatic/incremental cut Overlength cut processing Short cuts from 5mm cutting length Cross cuts Manages printing of labels with data or barcodes Hydropneumatic saw blade feed, continuously adjustable Pneumatic protective hoods Moving roller conveyor at the right saw unit with additional clamping cylinder Length positioning taking into account the saw angles and profile height Profile height measurement with length compensation incl. horizontal clamping cylinder Cjdewnfvtjpfx Adxshd Each saw unit has one horizontal and one vertical clamping cylinder Additional horizontal clamping cylinder at the fixed saw unit left of the saw blade 1 piece profile support between the saw units, pneumatically swiveling With 2-hand control IPC with Windows Embedded and HMI 15.0” touchscreen Incl. the options Minimum quantity spray devices Label printer Network connection for teleservice, 1 year duration We always have suitable extraction systems in stock, also for already existing aluminum saws!

Year of construction: 2006, condition: like new (used), Aluminum Silos on Support Ring (Plastic Granulate Silos) – used – designed for a bulk density of 0.6 kg/dm³ Volume: 190,000 liters Manufacturer: Ellimetal / Jongerius Available quantity: 24 Year of construction: 1992–1994 Diameter: approx. 3,500 mm Cylindrical height: approx. 22,750 mm Total height: approx. 24,000 mm (including roof edge railing) Material: AlMg3 Weight: approx. 4,000 kg Bulk density: 22 x 0.6 kg/dm³, 2 x 1.5 kg/dm³ Upper head slope: 15° Codpfx Adjwmy S Tsxohd Cone angle: 60° Equipment and connections: At the top head: 1 x access manhole DN 600 1 x vent opening with hood 1 x filter 1 x roof edge railing with handrail 2 x lifting eyes Various connections for level measurement On the shell: 1 x stand collar door 850 x 1,800 mm 1 x cable protection pipe DN 50 1 x flange DN 100 for filling line Various lead-throughs in the stand collar Bottom head: 1 x cone with 60° angle and shut-off slide 1 x inspection opening in the cone 1 x nozzle for empty notification Please note: The silo installation is currently equipped with a central filling station, which is used to fill the silos. For individual/standalone use of each silo, a separate filling line per silo must be retrofitted. A filling nozzle (DN 100) is already fitted at the highest point of each silo. The currently connected measuring and control technology is included in the scope of delivery. However, no guarantee is given for its functionality! Additional price: • The silo system features two multi-section access ladders with safety cage (additional price: €3,000 per ladder) Otherwise, as per pictures and drawings.

Condition: new, Year of construction: 2024, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Cedpfx Adjidun Iexehd Saw blade ø 800 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2024, condition: new, Available from stock in various versions! For mounting on aluminum circular saws, ideal for double miter saws and automatic sawing systems. Power 2.2 or 3.0 kW, with or without remote start. Removable 160-liter container. Chodpfjwczfaex Adxjd 2 extraction nozzles. Mobile, with 2 lockable casters. Hose, connectors, and reducers available to suit your needs.

Condition: new, Year of construction: 2024, Aluminum circular saw UK 600 HA 90°, semi-automatic The semi-automatic circular saw UK 600 HA 90° is an "upcut" machine and is mainly used for cutting used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and quick and quick and easy change of material. Only 90° cuts are possible with this machine! The saw feed takes place automatically at the touch of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Furthermore, this machine can be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! be equipped! Equipment Large support table, powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Chedpfx Aopa Nxdodxed Clearly arranged control panel Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be moved backwards to increase the cutting cutting capacity can be moved to the rear Large protective hood covers the entire working area Minimum lubrication system with 2 liter reservoir Adjustable blade and cutting feed Air gun for cleaning the machine Saw blade ø 600 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the vice and remove or push the material forward Technical data such as cutting range, power, etc. (see data sheet attached). Plantec Maschinen GmbH

Condition: good (used), Year of construction: 2013, Profile machining center Axis travel X-axis: 7430 mm Y-axis: 1320 mm Z-axis: 500 mm A-axis: +/-90° Working areas X-axis: 7460 mm Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Automatic tool magazine with 8 places in a protected housing, for drilling, milling and thread cutting tools, angle head and disc milling cutter, max. Ø 200 mm, + 2 places for 2 angle heads Tool holder ISO 30 In pendulum operation (2 zone machining) the working stroke per zone is limited to 3500 mm Cjdpfjvy E Ibox Adxohd

Condition: new, Year of construction: 2024, Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swivel range of 45° to the left and 22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! Equipment Double mitre machine with powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Large mitre range from -22.5° to +45°, Codpfspa Nxajx Adxehd Swivel range 67.5° - 0° - 45° Automatic miter adjustment, fixed stop functions at -45° / 90° / +45° and two variable stop functions adjustable to the desired angle! Two horizontal pneumatic clamping cylinders Clearly arranged control panel Large protective hood covers the entire working area, is lifted pneumatically Adjustable blade and cutting feed Connections for extraction system Minimal lubrication system Air gun for cleaning the machine Saw blade ø 450 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the clamping vice and remove or advance the material Plantec Maschinen GmbH

Condition: new, 40 MP is a single-head saw coming from above, with saw blade ø 400 mm. The saw table can be adjusted manually at an angle of +/- 45°. The saw head can be tilted outwards manually from 0° to 45°. The 40MP single-head saw is equipped with horizontal clamping cylinders for correct clamping of the profile, minimum spraying and mechanical protection of the sawing area Please also note our used stock machines from Emmegi, Elumatec, Pressta Eisele etc. Cjdpfx Adorfapajxehd

Condition: new, Year of construction: 2025, Aluminum circular saw UK 300 P, manual The UK 300 P is a manual table saw (pneumatic clamping) with simple safer Service! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300P has a compact design with clear operation. The saw cut is done manually by down into the material to be processed. The material is clamped using two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimum lubrication system and a fixed guard in front of the cutting area. equipment Compact, closed design with clear operation two pneumatic clamping cylinders Fixed protection from the cutting area Saw blade ø 300 mm Manual cutting feed Mist spray device for air-oil cooling Chsdpfsidqbbsx Adxsd workflow 1) Setting the cutting angle 2) Loading the material 3) Pneumatic clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, Chjdpfeidunvex Adxed powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Chedpfx Ajgwt Rvedxed

Year of construction: 2023, condition: new, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel Chodpfx Adogwt R Doxsd • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Chedpfx Adoidun Doxjd

Year of construction: 2023, condition: new, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer Csdpfx Adegwt Ryoxshd • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2024, Pneumatic press for the production of aluminum, all kinds of grooving, punching, drilling by means of a height-adjustable piston and actuation by foot switch. Maximum force working weight 3000 kg at 8 atm. Pneumatic pressure 6-8 atm Useful light 260 mm Working stroke 0-35 mm Packing size 500 x 320 mm Log speed 23 mm / s Chsdpfx Adjpa Nw Sjxod Approximate air consumption per cycle 25 liters Table dimensions 530 x 340 mm Free height 260 mm Adjustable stroke from 0 to 35 mm OPTIONS : Rotary cabinet / base PACKAGING AND DIMENSIONS: 600 x 490 x 600 (86 kg) Standard packaging made of wooden cages Plantec Maschinen GmbH

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast, convenient material changes as well as simple mitre angle adjustment. The UK 352 HA has a continuously adjustable mitre range of up to 45° on the left and 0° on the right. The saw feed is automatic at the touch of a button and the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Equipment - Precision underfloor circular saw - Mitre adjustment left 45º / 90º / right-45º degrees - incl. 2 pneumatic clamping vices (vertical) Chodpfxjgwt Rrs Adxod - Saw blade feed infinitely adjustable - Two-hand safety control - Adjustable material stop (rear) - Extraction device - chip extraction system - Mist spraying device for air-oil cooling - Air gun with spiral hose - incl. maintenance unit with pressure reducer - Ergonomically arranged control panel - Max. cutting height 125 mm - Saw blade 350 mm - Saw blade not included in scope of delivery! It is possible for you to view the desired system in our production/demonstration hall at any time. Please do not hesitate to contact us. Plantec Maschinen GmbH

Condition: new, Year of construction: 2024, The UK-350-P is a manual table saw with simple, safe operation! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK-350-P has a compact design with clear operation. The saw cut is made manually from below into the material to be processed. The material is clamped pneumatically. Fixed protection from the cutting area. Cedpegcbuwjfx Adxehd