Used Albert Goecker Kg for sale (82,120)

Condition: new, The scope of delivery includes: 01x wire grating, new Material color: sendzimir galvanized Execution: laid-on shelf grating, folded on both sides total depth: 1.112 mm clear span: 1.000 mm total width: 890 mm mesh size: 106 x 72.5 mm wire thickness: 3,8 mm Number of beams: 4 pcs. Gjdpfx Asilk Ngeacskc Unit weight: approx. 5.14 kg Technical data: Tested load capacity: 500 kg according to ANSI MH 26.2 for beam depth: 1.100 mm Assumed beam width: 50 mm Application for indoor use only Possibility of use: Shelf size/ modules required per shelf 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat resistant sheets: On request, we can offer you heat resistant sheets (see picture material) for sale; prices on request. Fire protection has special requirements. Therefore, the wire meshes can be provided with a welded-on heat shield. And should you need a push-through protection for cardboard boxes, the heat shield can also be made with a bend. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this article is subject to additional costs, which will be charged separately to the customer. depending on the delivery location or scope of delivery can be requested from us.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), empty load weight: 12,000 kg, volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: Gkjdpevtpq Hsfx Aacoc The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), functionality: fully functional, Temperature Block Calibrator with Accessories Temperature sensors are subject to mechanical, thermal, and chemical stress. This leads to drift over time. Only regular calibration of the sensors provides information about the difference between the actual and measured temperature and reveals the specific drift behavior. Dry-block calibrators and micro calibration baths are used to check and calibrate a wide variety of temperature measuring instruments and temperature sensors. Checking mechanical, electromechanical, or electronic measuring devices is effortless. SIKA's compact and robust instruments are easy to transport, simple to operate, and offer all the features required for the respective test. Frequently changing locations in the test field or in production, or stationary use in the measurement workshop and test and inspection laboratory, result in different requirements for a temperature calibrator. Therefore, the instruments must be lightweight and portable for quick and easy on-site use. SIKA offers various temperature calibrators for the range from -55°C to 1300°C. Gkjdpowc T Uaefx Aacjc

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Gksdsw Ivqmopfx Aacjc a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2024, machine/vehicle number: BN120XT-HA-X, JEWELliner "CUT" 120W model series "PremiumPlus" Cutting & Marking in very short working time. Gkedof Ul Uijpfx Aacjc - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Our engraving laser JEWELliner "CUT" is very usefull to cut precious metals and soft metals till max. thickness of 2.5mm. Thicker metals are possible, please contact us for more informations. More materials to cut or engrave like all metals, ceramic and some plastics, are possible. Applications can found in the jewellery ans also in other production areas. The machine dimension is very compact to integrade simple into a production area. Samples to cut: gold, silver, brass, carbon, aluminium Samples of material to mark: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional The main parts of JEWELliner "CUT" ( BN120XT-HA-X ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 280x200mm security glass - electrical automatic door opening - emergency button - 180° view area to the marking field - electrical z-axis for automatic focus positioning - configured engraving software Specification: - laser technology: fiber laser - outputpower CW: 120W - available frequency: 2.1 - 6300kHz MOPA - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – bigger or smaller possible - focus range: ca. 2 mm - min character high: 0.3 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L850 x W660 x H680 mm - weight: ca. 80kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: excellent (used), Professional workshop crane with counterweight and hydraulic drive. Very good condition, fully operational, ready for use. • Model: Hydrobull HB 500 GK • Manufacturer: E. Ziegler GmbH, Renningen (Germany) • Year of manufacture: 2004 • Lifting capacity: 500 kg • Lifting height: 280 cm • Jib length: 150 cm • Counterweight: 850 kg • Own weight: approx. 1200 kg (350 + 850 kg GG) • Outreach range: A1–A7 (240–500 kg, according to load chart) • Steel construction, mobile on industrial wheels • Hydraulic lifting and lowering of the jib • Technical and visual condition: very good Gkodpfxjxmt H Ij Aacoc

Condition: new, The scope of delivery includes: 01x wire grating, new Gksdpfx Aajilk Nrscjc Material color: sendzimir galvanized Execution: laid-on shelf grating, folded on both sides total depth: 1.112 mm clear span: 1.000 mm total width: 890 mm mesh size: 106 x 53 mm wire thickness: 3,8 mm Number of beams: 7 pcs. Unit weight: approx. 7.53 kg Technical data: Tested load capacity: 1,000 kg according to ANSI MH 26.2 for beam depth: 1,100 mm Assumed crosshead width: 50 mm Application for indoor use only Possibility of use: Shelf size/ modules required per shelf 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat resistant sheets: On request, we can offer you heat resistant sheets (see picture material) for sale; prices on request. Fire protection has special requirements. Therefore, the wire meshes can be provided with a welded-on heat shield. And should you need a push-through protection for cardboard boxes, the heat shield can also be made with a bend. General information about the article: This item is offered for pickup only. Any further transport or shipment of this or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Year of construction: 2015, operating hours: 19,750 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,000 l, empty load weight: 33,000 kg, volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2015 Operating hours 19,750 hours, as of July 2025 Number of bales pressed: 24,760 bales, as of July 2025 Main press force 1000 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 110 kW Total current consumption 213 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 35,000 x 8,480 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Gjdpfx Aoxb Dvvsacskc Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2015 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 14,500 mm Length goose neck 1,550 mm Grade 30° Nominal width 1,800 mm Effecting width 1,638 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 11,200 x 3,000 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, the transverse distribution belt and the baling press are for sale, with bale chute but without wire pulling stations and without wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: unexamined, High-pressure water pump, e.g., for - laboratory applications or - air humidification (cooling outdoor areas/patios) Pressure 100 bar Voltage 230 V Gkedpfewc Ubnex Aacsc Speed 1400 rpm

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete Gksdpfx Aow Ivrweacec essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Delivery scope: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening materials PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €2,711.50 net, plus transportation and VAT. Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €4,756.00 net, plus transportation and VAT. Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €6,659.80 net, plus transportation and VAT. Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €8,662.00 net, plus transportation and VAT. Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €8,381.70 net, plus transportation and VAT. Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €12,162.50 net, plus transportation and VAT. Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €15,136.80 net, plus transportation and VAT. Godsxdvhpopfx Aacokc Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €22,782.72 net, plus transportation and VAT. Further variants available upon request. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & TAILOR-MADE PRODUCTION This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended area of application. Our planning department will provide you with an individual, non-binding quotation based on your specifications. Whether for new construction, expansion, or modernisation of existing systems – we support you with sound technical expertise and practice-oriented solutions. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the order and can be requested from us individually. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price is stated per unit/excluding VAT, or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry, and crafts. We continuously offer attractive used deals from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Year of construction: 2019, condition: ready for operation (used), A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible. Gkjdpfxexhntrj Aacsc

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, table load: 1,000 kg, 3-axis turning and tilting positioner with 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 - 1500 mm Suitable for welding, assembly, processing, etc. With its stable and robust construction, flexible positioning via three axes including overhead, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Optimal positioning of the workpiece improves welding quality and allows higher specified loads in any position. Thanks to the endless rotation of the two rotary axes and additional height adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range 360° infinite Swivel range 360° infinite Gkedpfjxbh Dqjx Aacjc Lift: 1000 - 1500 mm Arm outreach radius: 1 meter

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet Godpfsxbqr Dsx Aacjkc

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 97-006000S, Offered for sale is an inkjet printer from the Jet3 series by Paul Leibinger GmbH & Co. KG, manufactured in 2020. The machine is in used condition and is currently not in operation. From a safety perspective, the machine complies with the latest standards. The machine is fully operational. HOUSING - Made of stainless steel - Width: 486 mm, Depth: 286 mm, Height: 446 mm - Weight: 20.5 kg PRINTHEAD - Stainless steel housing - Total length: 265 mm, diameter: 43 mm - Weight: 1.5 kg An inspection of the machine is possible upon request and by appointment. If you have any further questions, please do not hesitate to contact us. Gkedpfxexb Uqds Aacoc (Images to follow)

Condition: new, Year of construction: 2025, Pressure blasting cabinet DSK 15.15.20.RB75 with or without roller conveyor. Blasting chamber W=1150 D=1150 H=930mm. 1 TÜV-tested pressure vessel 20l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Dust extraction filter 2000m³/h 2,2kW Gksdoga I R Espfx Aacjc

Condition: used, TECHNICAL DATA: - Load capacity: 500 kg/m² - Grid dimension: approx. 4,200 x 5,000 mm - Top edge of floor covering: approx. 4,030 mm - Clear height: approx. 3,700 mm - Colour: blue - Condition: used Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Floor decking Gkedpfxjumbp Re Aacoc PRICES: Price: from €45.00 net per m², ex warehouse Nordhorn. OPTIONAL ACCESSORIES: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The extra costs depend on the delivery destination and the size of the consignment and are quoted individually on request. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is per unit/net price as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and the skilled trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive prices. Should you have any questions, please feel free to contact us. Connect Four – The Four Success Pillars of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Year of construction: 2005, functionality: fully functional, Offered is a Fein spring balancer, adjustable from 4.5-9kg, with a 2m cable pull and adjustable spring force. Several available, year of manufacture 2005. Further details upon request. Payment in cash or advance payment. Sale only to commercial customers. No warranty, no guarantee. Godpfxsw Tm Rnj Aacskc

Condition: like new (used), functionality: fully functional, load capacity: 6,500 kg, Load capacity 6500 kg Gedswd Twqjpfx Aacjkc Please note: Arm diameter adjustable from 1880 mm to 4550 mm (swivel-out) Space-saving and continuously adjustable, the extension arms can be locked in place Speed continuously adjustable from 0.001 to 5 rpm Motor power 3 kW Torque 15000 Nm Height 800 mm Maximum current transmission 2000 A Weight 4700 kg with hand and double-foot remote control CE certificate, declaration of conformity, documentation, circuit diagram with original 2016 quotation invoice Current new price approx. €28,000

Condition: used, Year of construction: 1979, Additional title: caustic settling tank Volume: 400 hl Gkodpfxexbpr Ns Aacoc Temperature: 20 °C Length: 5,8 m Width: 3,5 m Height: 3,85 m Position: horizontal Features: Insulated; Re-circulation pump and piping

Condition: used, Year of construction: 2018, functionality: fully functional, volume flow: 10.2 m³/h, input voltage: 230 V, USED VACUUM PUMP Technical data Max. pumping speed 50 Hz (mbar) 8.9 m3/h Max. pumping speed 60 Hz (cfm) 6.0 cfm Ultimate vacuum 2 x 10-3 mbar / 1.5 x 10-3 torr Ultimate vacumm with gas ballast 1 x 10-2 mbar / 0.75 x 10-2 torr Gsdpfx Aew Rqx Doacskc Ultimate partial vacuum without gas ballast 4 x 10-4 mbar / 3 x 10-4 torr Water vapor tolerance 40 mbar / 30 torr Number of stages 2 Permissible ambient temperature range (operation) 15 - 40 °C Permissible ambient temperature range (storage) -10 - 60 °C Max. outlet pressure (abs.) 1.1 bar Oil capacity min./max. 0.45 / 0.85 l Inlet connection small flange KF DN 25 Outlet connection small flange KF DN 25 Rated motor power 0.30 kW Rated speed 50/60 Hz 1500/1800 min-1 Protection class IEC 60529 IP 40 Dimensions (L x W x H) 503 mm x 156 mm x 240 mm Weight 24.8 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) - 52 dBA NRTL certification - No

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 20.10.09 with carriage and turntable. width: 2050mm depth: 935mm height: 955mm Gksdpfx Ajfnh Rveacjc Pneumatic lifting door with the advantage that the abrasive falls into the cabin when opening the door and not on the floor. If you have any questions about technical specifications etc. please contact us in writing or by telephone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known contacts of many years.

Condition: used, Year of construction: 1984, load capacity: 3,200 kg, 4 units Single-Girder Semi-Gantry Crane Manufacturer: Christmann & Pfeifer KG Hoist unit: Demag Size: PLV 168 NF Load capacity: 3,200 kg Travel unit: Demag Type: 13/6PF 12/4 Usable hook path: 4,800 mm Rail gauge: 8,110 mm Weight: approx. 2 t/each Price per unit, loaded free onto truck. The cranes are already dismantled and packed for transport. Machine can be inspected on site. All information subject to change. Prior sale reserved. Gedew Ugu Aspfx Aacokc

Condition: ready for operation (used), functionality: fully functional, load capacity: 3,000 kg, Equipment: foot remote control, Heinrichsglück welding positioner, load capacity 3000 kg. Infinitely variable speed and tilt adjustment. Equipped with several remote controls. Old technology but robust. Clamping plate diameter: 1.35 m. Height (horizontal): 1.4 m. Height (center): 1.15 m. Length: 2.2 m. Width: 1.3 m. Gkodpfx Aaew Ivh Sscec

Condition: ready for operation (used), 20-foot sandblasting rental container with pressure blasting equipment, filter system, and safety equipment Godpfoxl Dq Usx Aacskc