Used Aks for sale (666)

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Giodpfowu Dbusx Admol Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Year of construction: 2023, operating hours: 0 h, condition: new, MT900P is suitable for smoothing the concrete. Product information: - Motor: Honda GX200 - Power: 6,5 hp (Benzin) - Cubic Capacity: 196 cm³ - Power Diameter: 900 mm - Blade Diameter: 950 mm - Blade Qty: 4 - Blade Pitch Angle: 0-20° - Plate Weight: 16 kg Giodpfx Adsm Tin Ijmel - Length (Open Arm): 1910 mm - Length (Closed Arm): 1020 mm - Width: 950 mm - Height (Open Arm): 1100 mm - Height (Closed Arm): 930 mm - Fuel Consumption: 1,7 l/h - Fuel Capacity: 3,6 l - Oil Capacity: 0,6 L - Net weight: 100 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: excellent (used), Working width 45cm Length 200 cm with the arm 400 cm height 140cm 0,37 kW motor approx. 55 kW Giodpfx Adsgqug Aomjl In very good condition.

Condition: excellent (used), Year of construction: 2021, MC 1100 multi-blade saw from 2021, practically unused, purchased as a backup. It can cut 2200 x 2800 mm panels twice in a row without losses. Gisdpfxjwyqvve Admel The machine features 4 motors, 3 idle pressure rollers, and a saw spindle for blades with a diameter of Ø200-Ø250 mm. It boasts a robust, compact design. The main control panel at the front is equipped with a smooth feed speed regulator, allowing precise adjustment to any material for optimal finishing quality. Pawls and top rollers minimize kickback risk, ensuring maximum operator safety. The one-sided open frame provides unlimited capability for cutting extra-wide, oversized elements without the need for additional devices. Includes 3 automatic transport rollers and rubber rollers between saw blades to reduce vibration of MDF panels and wood during processing. TECHNICAL DATA: Cutting width: 1100 mm Maximum cutting height: 50 mm Minimum panel length: 650 mm Feed speed: 5-20 mt/min Feed motor: 0.75 kW, 1410 RPM Maximum power consumption: 22 kW, 380V Power: 30 HP Maximum blade diameter: 250 mm Saw shaft diameter: 70 mm Saw speed: 3500 RPM Maximum number of saw blades: 15 Working height: 900 mm Noise level: 80 dB Pressure: 8 Bar Dimensions (W/L/H): 1640x1495x1400 mm Weight: 1590 kg Infeed and outfeed table: Yes

Condition: like new (used), Year of construction: 2023, operating hours: 468 h, functionality: fully functional, machine/vehicle number: 4000-2023-015, - Holemaster 4000 D Line 6X is 6 sided CNC Drilling/Boring Machine. - Holemaster 4000 D Line can perform drilling,grooving and milling process - Maximum Working Area(mm): X-Unlimited / Y-1300 / Z-50 Gijdoula Hrspfx Admol - 1 Drilling Head Minimum Working Area (mm): X-200/ Y-100 / Z-10 - 2 Drilling Heads Minimum Working Area (mm): X-200/ Y-200 / Z-10 - It has 2 pieces special designed Italian brand FAM(Morbidelli) drilling unit which is composed of 10 vertical bits,8 horizontal bits and 1 saw blade.(20 vertical bits,16 horizontal bits and 2 saw blades) - It has 4 kw German brand Hertz spindle. - It has Italian brand FAM(Morbidelli) drilling unit which is composed of 10 vertical drilling bits - Holemaster 4000 D Line 6X machine has air flotation table for loading side and automatic conveyor table for unloading side. - Holemaster 4000 D Line 6X has Italian brand Wide Automation safety mats which provides safety for operator on both loading and unloading tables. - Holemaster 4000 D Line 6X has central lubrication system which lubricates lineer rails automatically. - Holemaster 4000 D Line 6X has Japanese brand Omron Motion Control system which is one of the most suitable systems for point to point drilling processes. - Holemaster 4000 D Line 6X has German brand Siemens electric units. - Barcode reader The machine is still in production use. Available from Мarch 2025.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. Godpfx Aor Ak Exsdmoil The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Year of construction: 2023, operating hours: 0 h, condition: new, MT700K (optional MT600K) is suitable for compacting the ground. Product information: Gsdem Tipwjpfx Admoil - Motor: Honda GX270 | GX200 - Power: 9 hp (Benzin) | 6,5 hp (Benzin) - Cubic Capacity: 270 cm³ | 196 cm³ - Dimension Plate: 700mm x 500mm | 600mm x 400mm - Length (Open Arm): 1570 mm | 1460 mm - Length (Closed Arm): 990 mm | 860 mm - Width: 500 mm | 420 mm - Height (Open Arm): 950 mm | 850 mm - Height (Closed Arm): 850 mm | 790 mm - Gradeability: 30% - Centrifugal Force: 30 kN | 20 kN - Vibration Frequency: 90 Hz | 73 Hz - Fuel Consumption: 2,5 l/h | 1,7 l/h - Fuel Capacity: 6 l | 3,6 l - Oil Capacity: 1,1 l | 0,6 l - Net weight: 130 kg | 103 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, RL2000 is suitable for compacting the soils such as asphalt. Product information: - Engine: Hatz - Power: 7,5 kW - Cubic Capacity: 349 cm³ - Fuel Consumption: 2,5 l/h - Battery: 12 V - Fuel Capacity: 4,3 l - Oil Capacity: 12 l - Drum Diameter: 400 mm - Drum Width: 600 mm - Length (Open Arm): 2400 mm - Length (Closed Arm): 1300 mm - Width: 710 mm - Height (Open Arm): 1010 mm - Height (Closed Arm): 1250 mm - Water Tank: 25 l - Hydraulic Oil Tank Capacity: 50 l - Vibration Frequency: 60 Hz - Centrifugal Force: 20 kN - Static Linear Load: 5,6 kg/cm Gisdpom Tk Sbofx Admol - Compaction Area: 2700 m²/h - Speed: 4,5 km/h - Gradeability: 40% - Net weight: 572 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2023, B-Series is suitable for bending your steel into the desired shape. B-Series: B26, B36, B45X1, B50 BS-Series (Double Bending): BS36, BS45, BS50, BS60 (MG65 PRO) Product information: - Voltage: 380 V (16 A) - Motor Power: 2,2 kW - 6 kW - Ideal for your construction company or also for your construction sites - Left & Right Bending possible (in the BS-Models) Giodpfx Ajm Shffjdmel - In addition to the individual bending process, a bending sequence can also be programmed - Head for different reinforcing steel Ø are included in the accessories (incl. accessories) - Possible in automatic or manual mode - Bending capacities depending on steel strength according to table (see pictures) - Optional available with digital control panel - Net weight: 215 kg - 850 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, HB12X6 (optional 12X3) is suitable for bending your reinforcing steel mesh into the desired shape. Product information: - Motor Power: 7,5 kW (5,5 kW) Gjdpfom Tmddox Admoil - Voltage: 380 V - Length: 6400 mm (3400 mm) - Width: 1000 mm - Height: 1090 mm - Hydraulic Oil Tank Capacity: 36 l - 6 m (3 m optional) - 3 stops - Bending angles: 45°-90°-135° - Net weight: 1250 kg (710 kg) Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, MG20B is suitable for bending your steel into the desired shape. Gisdpfsm Sgx Dox Admel Product information: - Voltage: 380 V (optional with 220 V available) - Motor Power: 1,5 kW - Dimensions Machine: 60cm x 45cm x 32cm - Dimensions Machine frame: 57cm x 44cm x 60cm - Ideal for your construction company or also for your construction sites - Easy to carry - In addition to the individual bending process, a bending sequence can also be programmed - Stirrup head for different reinforcing steel Ø are included in the accessories (incl. accessories, see pictures) - Possible in automatic or manual mode - Bending capacities depending on steel strength according to table (see pictures) - Optional available with digital control panel - Net weight: 95 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, MATRIX55S is suitable for cutting your rebar to the desired length (optional available with Synclone45S, Doublebender). Product information: - Hydraulic Motor: 7,5 kW - Synclone45S is optionally available for double bending - 360° swiveling digital control panel - Barcode system optional available - Total weight: 5200 kg Gedpfx Ajm Tqazjdmsil Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, H- & M-Series is suitable for cutting your rebar to the desired length. H-Series (hydraulic): H26, H38S, H45S, H55, SH60 M-Series (mechanical): M36, M45, M55 Product information: - Voltage: 380 V (16 A) - Motor Power: 2,2 kW - 7,5 kW - Adjustable blade stopper - Silent, safe and environment friendly - Less maintenance - Long product life Godpfem Shxijx Admeil - Ideal for your construction company or also for your construction sites - Cutting capacities depending on steel strength according to table (see pictures) - Included in accessories: 1x additional blade, 1x allen key - Hydraulic Oil Tank Capacity: 12,5 lt. - 35 lt. (HLP32) | SH60: 163 lt. - Net weight: 120 kg - 960 kg Mechanical: - 0,8 sec. cutting time - High cutting performance - Foot pedal and arm control Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, BCZ600 is suitable for sawing your stones/concrete. Product information: - Voltage: 380 V (16 A) - Engine Power: 3 kW - Engine Rotation: 1500 rpm - Frequency: 50 Hz Godencffvepfx Admsil - Table Size: 480mm x 380mm - Working height: Ergonomic height of 88 cm - Dimensions Machine: 1510mm x 750mm x 1530mm - Saw Diameter: 600 mm - Saw Thickness: 4,4 mm - Net weight: 186 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2025, SLS12 is suitable for Bending & Cutting your rebar from the coils to the desired shape. High productivity and fast solution for projects. Giedpom Tm H Aofx Admjl Product information: - Single Wire: 6-12 mm - Double Wire: 6-10 mm - Driving Motor Power: 11 kW Servo - Driving Speed: 120 m/min - Bending Motor Power: 4 kW Servo - Bending Speed: 1200°/sec. - Voltage: 400 V 50 Hz / optional 60 Hz - HMI 15" Display - Coiler: 3 to. (optional 5 to.) - Dimension Machine: 5000mm x 1710mm x 2340mm - Dimension Coiler: 2150mm x 2120mm x 2300mm - Net weight Machine: 3000 kg - Net weight Coiler: 1000 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: used, This listing is for the Peak Scientific Corona Nitrogen Generator 1010 paired with the Corona Air Compressor. The unit is in full working condition and is ready for immediate release. System Details: Giedsxwc Iispfx Admjl The Peak Scientific Corona Nitrogen Generator 1010, paired with the Corona Air Compressor, is engineered to meet the demands of labs requiring high-purity nitrogen, specifically designed for applications like chromatography. The Corona 1010 is ideal for the Thermo Scientific Corona Veo Charged Aerosol Detector and is also suitable for LC, HPLC, and UHPLC applications, providing nitrogen flows up to 5 L/min at 80 psi. Key Features: Maximum Gas Flow: 5 L/min Maximum Output Pressure: 80 psi (5.5 bar) Maximum Purity:

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21190 Specifications: Year: 1989 Gedpfsw Srhiex Admjil EU approval valid until: 21.08.2026 2 axles Tires (see photos) Curb weight: 5,250 kg Gross weight: 20,000 kg Ready for delivery Description:For sale: 1989 Nor-Slep 2-axle tipping trailer with spreader tailgate.The trailer is EU-approved and in working condition.Ready for delivery. Own weight: 59000 Model: 2 akslet

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 4000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 22 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) Giodpegvq A Eefx Admsl - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: used, Year of construction: 1993, press force 100 t stroke - 170 mm Giodpfx Adevuk Rdsmsl working lenght 3200 mm dayligth 450 mm table dimensions 3220 x 800 mm speed down 50 mm/s speed up 150 mm/s working speed 7 mm/s oil volume 600 l power requirement 20,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 2,6 m year of manufacture 1975 - modernization 1993 permitted for manual loading according to the German Safety Regulations (UVV- retrofitted 1993 by the manufacturer) with hydraulic-mechanical drive, stroke adjustment with fine andjustment and inching speed, manual ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, mileage: 570,000 km, power: 331 kW (450.03 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, retarder, spoiler, traction control, Year of manufacture: 2020 Front axle: Steering; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 1: Double wheels; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60% Rear axle 2: Lift axle; Tyre profile left: 40%; Tyre profile right: 40% Empty weight: 9.850 kg Gsdpfx Aex Daztedmsil Carrying capacity: 16.150 kg GVW: 26.000 kg Registration number: BB-900-N

Condition: new, Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. We offer fully automatic circular saw machines and complete sawing centers from the "Profilma", "KS", and "SW" series with saw blade diameters up to 650 mm. Loading magazines and unloading systems are customized to your requirements. A high-performance extraction system with oil mist separator completes the comfort package. Gjdpfex E U Dnjx Admeil Contact us – together we will find the optimal solution for your production!

Condition: used, machine/vehicle number: YY9PV24TX3P01xxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 21198 Godpfx Aew Srhvodmeil Specifications: Year: 2013 EU-approved until: 12.08.2026 3 axles Lift on 1st and 3rd axles Tires (see photos) Tailgate Air suspension Power connector needs replacement Ready for delivery Description:2013 Nor Slep 3-axle tipping trailer.The trailer is lightly used and in good condition.It requires a new power connector, but otherwise works as it should and is ready for use.Available for immediate delivery. Technical approved: Yes EU-approved until: 12.08.2026 Own weight: 6350 Model: 3 akslet tipphenger

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 6000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 21 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables - d 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production Godpfjgvq D Uox Admsil - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: used, machine/vehicle number: YV2RT60G4GA79xxxx, mileage: 169,612 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21786 Spesifikasjoner bil:  2016 modell  Eu-godkjent til: 26.08.26 169.612 km  I-shift  8x4  Euro 6  551 hk  Gedpfx Aoxwkibjdmsil Fjæring : helluft  Dekk (se bilder)  Sving og løft på 4 aksling  Luftstyrt kapell  Retarder  Kaffe trakter  Giljotin luke  Servicehistorikk  Seng  Dieselvarmer  Klima/ac Lys  Radio Leveringsklar        Spesifikasjoner henger:  2006 modell  ekt  Ikke Eu-godkjent  2 akslet  Dekk (se bilder)  Egenvekt: 4400 kg  Tillatt totalvekt: 18500 kg  Lengde: 750 cm  Bredde: 250 cm  Leveringsklar    Beskrivelse:  Vi har 2016 Volvo FH540 8x4 asfaltbil m/ mtdk k218 2 akslet asfalthenger for salg. Bilen fungere som den skal og vedlikehold og servicer er blitt tatt fortløpende.  Hengeren er ikke eu-godkjent og selges som ekt. feil og mangler finnes på hengeren og noe påkost må regnes med.  Leveringsklar  Km: 169612 HK: 550 Technical approved: Yes EU-approved until: 26.08.2026 Own weight: 16060 Model: FH540 8x4 asfaltbil m/ mtdk k218 2 akslet asfalthenger

Condition: used, machine/vehicle number: 224xxxx, Year of construction: 1991, Please contact ATS Norway for more information Please provide reference number upon request: 18312 Specifications: - Not eu approved - 4 axle with loose axle - Missing pictures of axle 4 - Good tires - Air suspension - Manual Extraction 3 metres - Hydr. width of 25 cm on each side - Force on axle 3 - Lift on 2 and 3 - Turn on 1 - Total length 1620 cm - Width 250 cm - Wheelbase 182/182 cm - Hanger is varnished - Rust will occur - Sold with 21 2-er errors and 0 3-er errors - A number of valve faults that have the most points - Ready for delivery Description: 1991 Vang 4 axle well trailer sold as a repair object. It's quite a long patch, but a lot of it is small things. Call for more info. The trailer has an extension of 3 meters and approx. 25 cm hydr. widening on each side says owner. Forced steering on axle 3, lift on 2 and 3. turn on 1. It comes with a loose axle, we lack pictures of it. The trailer is ready for delivery. Technical approved: no EU-approved until: 31.10.2023 Own weight: 10300 Giodpfx Ajvg Awysdmel Total Weight: 63000 Payload: 52700 Width: 250 Length: 1630 Model: 4 akslet brønnhenger