Used Air Cooled Water Chiller for sale (31,102)

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Nwodpfokw Ukujx Aaajf Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Year of construction: 2011, operating hours: 6,967 h, condition: used, functionality: fully functional, 1 York, Johnson Controls, water chiller, model: YLAA0390HE, 390 kW (335,400 frigories), R-410 gas, 5 scroll compressors, tubular heat exchanger, Dimensions: 3690 x 2242 x 2393 mm high, Weight: 2805 kg, with 6 axial fans. Equipment tested and guaranteed in Spain. Njdowg Hnnspfx Aaaowf

Year of construction: 2008, operating hours: 13,000 h, condition: used, functionality: fully functional, (Take advantage of the occasion – price already reduced by 20%) Daikin water chiller, 368 kW (316,480 frigories) + heat pump, Model: EWYD360AJYNN, 2 semi-hermetic compressors, R-134A refrigerant, 8 axial fans, maximum consumption 132 kW. Dimensions: width 2254 x length 4783 x height 2336 mm, weight 4020 kg. Units tested, with warranty, shipping throughout Spain. Reference: 1113. We have 2 units in stock. Nwodexf Huijpfx Aaaef

Year of construction: 2014, operating hours: 3,096 h, condition: excellent (used), functionality: fully functional, (Take advantage of the occasion: equipment already reduced by 20%) 1 Carrier water chiller, model: 30RB0202-B, cooling only, 193 kW (165,980 frig) power consumption 94 kW, refrigerant R410A, with shell-and-tube heat exchanger, 4 axial fans, 3 scroll compressors, weight 1,824 kg, dimensions: 2420x2240x2320 mm Nwjdpfxjxlua Ho Aaasf Compressor operating hours: 77, 83, and 3,096 respectively. Equipment tested with full refrigerant charge, with warranty, shipping to all of Spain Reference: 1139

Condition: excellent (used), functionality: fully functional, Chiller - Emerson Network Power chilled water unit Brand Emerson Network Power Cooling capacity 1300 kW Nwedswplwgjpfx Aaaef Dimensions 13.5×2.50×2.40 m The device is characterized by high cooling capacity, which allows it to be used in demanding environments where reliable heat dissipation is necessary.

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Nodpei U Dxujfx Aaajwf Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Complete Ammonia Refrigeration Installation: Type: Reciprocating Compressor Refrigeration System V1 412 E and VF 612 E Year of manufacture: 2008 Cooling capacity: 760 kW Refrigerant: Ammonia NH3 / R717 Permissible operating pressure: low-pressure side -1/12 bar, high-pressure side -1/17 bar The cooling installation comprises: Njdpfexg Ruijx Aaajwf - 2 GEA Grasso reciprocating refrigeration compressors, consisting of: (1x) Grasso 612E package and (1x) Grasso 412E package - EM Polar pressure vessel, type: DM1600 - Kühlturm GmbH evaporative condenser, type: KIV 2/12-28-12, 2 - Switchgear and control cabinets (2 units) - 3 pallets with valves, plus additional spare parts Grasso 612E package: - 1 unit Grasso/GEA piston compressor, type 612E - Leroy Somer electric motor, 200 kW / 1468 RPM - Dimensions: 3200 mm x 1900 mm x 2150 mm - Cooling capacity: 418.5 kW at -10°C / +40°C - Year of manufacture: 2008 Grasso 412E package: - 1 unit Grasso/GEA piston compressor, type 412E - Leroy Somer electric motor, 132 kW / 1468 RPM - Dimensions: 3200 mm x 1900 mm x 2150 mm - Cooling capacity: 325 kW at -10°C / +40°C - Year of manufacture: 2008 EM Polar pressure vessel: - 1 unit EM Polar pressure vessel, type DM1600 - Capacity: 9580 liters - Dimensions: 5200 mm x 1650 mm x 1900 mm - Empty weight: 2400 kg - Year of manufacture: 2008 Kühlturm GmbH evaporative condenser: - 1 unit evaporative condenser, type KIV 2/12-28-12, 2 - Dimensions (two parts): 6900 mm x 2500 mm x 2500 mm and 3200 mm x 2500 mm x 2150 mm - Cooling capacity: 1098 kW - Year of manufacture: 2008 Further information available on request.

Year of construction: 2011, condition: good (used), Description Brand Copeland Model MC-S9-ZB56KE ID 7203 Status Active Year of manufacture 2011 Location Oradea (RO) Air cooled condenser Copeland MC-S9-ZB56KE manufacture in 2011. Copeland model D3DA4-75X-AWM compressor, manufacture in 1998, 3 cyl., suction capacity 32.2m3/h. Max. pressure: 28/22.5 bars. Complete switchbox. ExWorks. Price is negotiable. Technical inspection can be organized at least 24 hrs before the due date Nsdpfx Aedypiceaaswf We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Condition: excellent (used), Year of construction: 2020, operating hours: 3,100 h, functionality: fully functional, cooling capacity: 234 kW (318.15 HP), type of cooling: air, aircooled Chiller DATECH/Swegon Cooling cap.234 KW (68,5 refr.tons), 1 circuit with 1 screw compressor,full inverter, Njdpfx Aey E N Unsaaewf Shell&Tube evaporator Cooling agent: R1234ze(GWP< 1) low hours: 3100hr tested,ready for operation

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 131 kW (178.11 HP), type of cooling: air, aircooled Chiller MTA Cooling cap.131 KW (47 refr.tons), 2 circuits with each 2 scroll compressors, Direct expansion evaporator, with integrated pump and tank Nodpfoyuvppex Aaaswf R 410a tested,ready for operation

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 291 kW (395.65 HP), type of cooling: air, heating capacity: 324 kW (440.52 HP), aircooled Chiller Daikin EWYD290BZ SL, Heatpump Cooling cap.291 KW (85 refr.tons),Heating cap. 324 KW(100 refr.tons) 2 circuits with 2 semihermetic screw Nwodpfx Aoyuvdgjaaef compressors,inverter driven Shell+Tube evaporator, with integrated 1 pump R 134a tested,ready for operation

Condition: like new (used), Year of construction: 2024, functionality: fully functional, cooling capacity: 108 kW (146.84 HP), type of cooling: air, aircooled Chiller GALETTI very low hours Cooling cap. 108 KW (44,5 refr.tons), 2 circuits with each 1 scroll compressor, Plate evaporator R 454B tested,ready for operation Nodpfeyutlbox Aaajwf

Condition: like new (used), Year of construction: 2026, functionality: fully functional, cooling capacity: 327 kW (444.60 HP), type of cooling: air, aircooled Chiller GALETTI test machine Cooling cap. 327 KW (100 refr.tons), 2 circuits with each 2 scroll compressors, Plate evaporator, with integrated pump and tank R 410a tested,ready for operation Nwodpfoyuti Tex Aaasf

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, type of cooling: air, heating capacity: 160 kW (217.54 HP), aircooled Chiller Daikin EWAD540TZ-XR Nwsdpfjyrqp Esx Aaaef Cooling cap.536 KW (157 refr.tons), 2 circuits with 2 semihermetic screw compressors,inverter driven Shell+Tube evaporator, with integrated 1 pump R 134a tested,ready for operation

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 1,380 kW (1,876.28 HP), Watercooled centrifugal Chiller McQuay 087L, 1 circuit with 1 centrifugal compressor Cooling Capacity at 12/6C° = 1380 KW (400 refr.tons) with Shell&Tube evaporator and Condenser R 134A ready for operation in working order Nwedpfx Ajx D Upxsaajf

Condition: excellent (used), Year of construction: 2013, operating hours: 1,180 h, functionality: fully functional, cooling capacity: 249 kW (338.55 HP), Cooling cap.249 KW (73 refr.tons), 1 circuit with 1 screw Nedpevfcqqofx Aaajwf compressors, with VSD drive with Plate evaporator, R 134A Colling down to -10C° water/glycol out. with integr. pump built in Container frame ready for operation

Condition: excellent (used), Year of construction: 2017, operating hours: 5,800 h, functionality: fully functional, cooling capacity: 160 kW (217.54 HP), type of cooling: air, power: 260 kW (353.50 HP), heating capacity: 160 kW (217.54 HP), aircooled Multipipe Chiller Trane CMAB HSE 185 cooling and heating in the same time Cooling cap.160 KW (47 refr.tons), Heating 160KW (47 refr.tons) 2 circuits with 4 scroll compressors,inverter driven Plate evaporator, with integrated 2 pumps R 410a, low hours Nedpswy Dn Sofx Aaaowf tested,ready for operation

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Nsdpfxorzq Are Aaaewf Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: excellent (used), Year of construction: 2012, Brand: AERMEC Model: NS2352X Cooling Capacity: 500 kW/h Cooling Capacity: 430,000 Kcal/h Evaporator: Shell & Tube Nwedjl Dqtwspfx Aaaef Condenser: Aluminum Fin – Copper Tube Fan Type: Axial Number of Fans: 8 Units Compressor Brand: Bitzer Compressor Model: CSH8563-90Y-40P Number of Compressors: 2 Units Control System: Carel Dimensions (W × L × H): 2200 × 4800 × 2600 mm Weight: 3224 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, cooling capacity: 503 kW (683.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,174 kg, input voltage: 400 V, total width: 2,200 mm, total length: 6,400 mm, total height: 2,500 mm, Aircooled chiller Uniflair BREC2202A 503 kW Cooling capacity: 503 kW / 143.03 tons (12/7 — 35°C) Year of manufacture: 2013 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Fu Sheng BSR 324 (screw) Type of refrigerant: R134a Number of fans: 8 pcs. Nsdpfoy Edf Ujx Aaaowf Hydraulic module: 2 pcs. water pump Calpeda NM 80/16A/C Dimensions: 6.4x2.2x2.5 m. Weight: 5174 kg. One compressor need to be serviced

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 443 kW (602.31 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,759 kg, input voltage: 400 V, total width: 2,250 mm, total length: 5,700 mm, total height: 2,500 mm, warranty duration: 6 months, Aircooled chiller Systemair SYSCREW 440 AIR EVO HSE CO 443 kW Cooling capacity: 443 kW / 125.97 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Economizer Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSH7593-90Y-40P (screw) + 1 pcs. Bitzer CSVH24-125Y-40A (screw, inverter) Type of refrigerant: R513a Number of fans: 10 pcs. (EC-fans) Dimensions: 5.7x2.25x2.5 m. Weight: 4759 kg. Working hours: 3/3 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Nedpfswpgxrox Aaaowf Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Nedpfx Aajwp Dq Sjaewf Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, power: 2 kW (2.72 HP), color: black, overall weight: 120 kg, Year of construction: 2018, Air output: 32200 m3/h Speed: Variable Waterreservoir: 180 L Noise: 50db~70db Dimensions (cm): 186(H)×155(W)×81(D)cm Weight: 120 kg Power consumption: 1.35 kw ( 1250Watt ) If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Nwjdpfxoy Egkys Aaajf Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger, jet stream, cooling fan -Manufacturer: Port-A-Cool, mobile cooling fan type PAC2K36HP220-50 -Fan: Diameter: 36" / 914 mm Speed adjustable Nwjdjrxgwbopfx Aaajf -Operating pressure: max. 3.45 bar -Voltage: 230V 50Hz / 5.5A -Dimensions: 1575/820/H1590 mm -Weight: 112 kg with pallet

Condition: used, - Dimensions: 1050 x 660 x 990 mm - Empty weight: 62 kg - Operating weight: 192 kg - Precise water cooling down to +0.5°C, ideal for bakery and pastry applications - Double-walled insulated stainless steel tank, useful volume: 135 litres - Easy cleaning: rounded corners, hygienic and accessible design Nedpfxjw Ducbj Aaaowf - Water flow rate up to 10 L/min (gravity-fed) - Includes DMA dosing kit for precise water metering in your recipes