Used 905 Press Erfurt Pkzz Iv 500 1 Ts for sale (15)

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Gjdpfjvbcxtjx Aaceuh Movie available

Condition: used, Year of construction: 1990, Erfurt press force 160 tonnes table 120x80 Gusdpjxl Thiefx Aacsh

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Gusdowx R Rdopfx Aacsh Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tandem Line_TL-XL 7.31 Specification: Front of Line VMT panel detection Sheet loading device for steel and aluminum Cleaning and lubrication unit for steel and aluminum Tandem Line Consists of 5 individual stages Automation (robot) 10 sliding tables 2 conveyor belts after the 5th orientation station Retrofit year: 2012 Mechanics: guides, drive, bearings Electrical: conversion of control to Siemens S7 conversion of safety control to Pilz conversion of visualization to Beckhoff 1st Stage Manufacturer: ERFURT LINK DRIVE Press force: 2,800 kN Table surface: 5,000 x 2,500 mm Ram surface: 5,000 x 2,500 mm Ram stroke: 1,120 mm Die height: 1,100 / 1,650 mm Ram adjustment: 550 mm Strokes per minute: 6–15 Cushion in ram Cushion stroke: 200 mm Gedpfxjw R Ucto Aacsuh Ejector force: 1,000 kN Hydraulic cushion in table Cushion stroke: 350 mm Counterforce: 6,000 kN Ejector force: 600 kN Year of manufacture: 2010 2nd Stage Manufacturer: SCHULER Press force: 1,500 kN Table surface: 4,500 x 2,500 mm Ram surface: 4,500 x 2,500 mm Ram stroke: 1,100 mm Die height: 1,000 / 1,500 mm Ram adjustment: 500 mm Strokes per minute: 6–18 Cushion in ram Cushion stroke: 150 mm Ejector force: at 5 bar, 1,500 kN Year of manufacture: 1987 3rd Stage Manufacturer: SCHULER Press force: 1,500 kN Table surface: 4,500 x 2,500 mm Ram surface: 4,500 x 2,500 mm Ram stroke: 1,100 mm Die height: 1,000 / 1,500 mm Ram adjustment: 500 mm Strokes per minute: 6–18 Cushion in ram Cushion stroke: 150 mm Ejector force: at 5 bar, 1,500 kN Year of manufacture: 1987 4th Stage 2nd – 5th Stage Manufacturer: SCHULER Press force: 1,500 kN Table surface: 4,500 x 2,500 mm Ram surface: 4,500 x 2,500 mm Ram stroke: 1,100 mm Die height: 1,000 / 1,500 mm Ram adjustment: 500 mm Strokes per minute: 6–18 Cushion in ram Cushion stroke: 150 mm Ejector force: at 5 bar, 1,500 kN Year of manufacture: 1987 5th Stage Manufacturer: SCHULER Press force: 1,500 kN Table surface: 4,500 x 2,500 mm Ram surface: 4,500 x 2,500 mm Ram stroke: 1,100 mm Die height: 1,000 / 1,500 mm Ram adjustment: 500 mm Strokes per minute: 6–18 Cushion in ram Cushion stroke: 150 mm Ejector force: at 5 bar, 1,500 kN Year of manufacture: 1987

Condition: defective spare-parts repository (used), Year of construction: 1995, functionality: not functional, machine/vehicle number: PEE I 400, pressing force: 400 t, stroke length: 140 mm, used eccentric press incl. functional belt device, details according to type plate, inspection possible at any time Gusdpst U Nwrefx Aaceh Main shaft and drive motor are to be replaced/renewed

Condition: used, The machine is in good and usable condition. The price includes loading the machine onto the truck. Gsdpfx Aov Nphkoacsuh

Condition: excellent (used), Year of construction: 1985, ram adjustment: 200 mm, total height: 6,300 mm, table width: 1,320 mm, table length: 1,000 mm, stroke length: 400 mm, distance between stands: 1,000 mm, power: 38 kW (51.67 HP), Trimming press 400 ton force ERFURT, Germany type PKZ 400. Guedpfx Aelnlpxjacoh

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. Gujdpfx Aasu N A U Ijcoh For inquiries about this press, please select your offer option! in progress. *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm Guedpfou N A Uuex Aacsh - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Year of construction: 1985, Offer 25995 Technical Data: - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm - Max. installation depth with straightening bar 1050 mm Godpfx Aaewp Eguscsuh - Max. installation depth without straightening bar 1400 mm - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports

Condition: used, rated capacity 23 kW rated current 43 A Gjdpeucgnijfx Aacouh voltage 400 V For sale is an electrical control cabinet, which originally belonged to the a single-column eccentric press, make Erfurt, type PEE III/160

Condition: used, Technical details: intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m conrods for mechanic press PEE 250 Gusdpfx Aasu Nurxscjh trapezoid thread dia. 146x14mm *

Year of construction: 1997, condition: used, Press: Serial No. / Year of Manufacture 01108001 Type: PE-4-HS-630 FS Manufacturer: ERFURT GmbH Press weight: 225 t Ram force 10 mm before BDC max.: 6300 kN Ram stroke: 300 mm Adjustable strokes per minute: 10 to 75 /min Die installation height min./max.: 850/1000 mm Gusdoxmd Hlepfx Aaceh Ram adjustment: 150 mm Max. die dimensions (L x W): 3600 x 2200 mm Top dead center crankshaft: 0 deg Clutch/brake system Permissible pressure max.: 65 bar Permissible pressure min.: 60 bar Longitudinal stacker Blank length: 200-2500 mm Blank width: 300-1600 mm Cross stacker: Blank length: 300-1600 mm Blank width: 200-1600 mm Strip feeding: Strip width: 300-1600 mm Strip thickness: 0.5-3.0 mm Coil weight: 25.0 t

Condition: used, floor-plate length:3140 mm floor-plate width:1800 mm floor-plate height:100 mm groove width:36 mm no. of flutes:10 flute distance:260 mm weight of the machine ca.:4,1 t Gsdpfecxxl Uox Aacouh dimensions of the machine ca.:3140 x 1800 x 100 m

Condition: used, Technical details: diameter of piston: Ø 160 mm weight: 200 kg dimensions: 0,6 x Ø 0,3 m draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm Guedpju Nurfjfx Aacoh piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch *