Used 5 Axis Cnc Lathe for sale (67,683)

Condition: excellent (used), Year of construction: 2008, turning length: 1,609 mm, spindle bore: 110 mm, travel distance X-axis: 335 mm, travel distance Z-axis: 1,609 mm, spindle motor power: 26,000 W, rotational speed (max.): 2,100 rpm, total height: 2,100 mm, total length: 3,800 mm, total width: 2,100 mm, CNC Lathe with c-axis VIPER - VT-33LMBC MACH-ID 9473 Make: VIPER Type: VT-33LMBC Control: Fanuc 21iTB Year: 2008 Tooling holders included Live driven Axiaal tools included  Live driven Radial tools included Chip conveyor Tool eye arm Motorized Tailstock 3 chuck 400 mm with extra2008 jaws Max. turning Ø: 780mm X-Axis: 335mm Z-Axis: 1609mm Spindle bore: 110mm Speedrange: 2100Rpm Spindle power: 26kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:4.5kW Chip conveyor: yes Tool eye: yes Pinole taper: 5Mk Stroke pinole: 110mm Quill Ø: 100mm Length: 3800mm Width: 2100mm Height: 2100mm Iiedpfxsyw Ii Ue Aa Ioc Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2002, 5-axis CNC machining centre Manufacturer: AXA Machine model: VPC 50 U Control system: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Portal construction Iijdjyz R Hdepfx Aa Iec TECHNICAL DATA Travels - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle – swivelling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size fixed table L x W: (mm) 1,100 x 1,100 - Table diameter built-in rotary table: (mm) 1,100 x 1,100 Modifications and errors in the technical data and information excepted.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor Iiedpfx Ajy Ih Rgea Ioc - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar Iisdoy Txrxspfx Aa Iec + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X-axis: 650 mm Y-axis: 325 mm Z-axis: 350 mm B-axis: 130 degrees C-axis: 360 degrees Spindle speed: 30,000 rpm Iiedjzapp Hepfx Aa Iec Spindle interface: HSK 50 Tool changer: 60 positions Control system: Makino Professional 5 Includes hybrid length measuring system Includes measuring probe Includes approximately 60 HSK 50 tool holders (MST + Rego Fix) Spindle has been replaced Ball screws for X and Y axes replaced in 2024 Machine currently has approximately 32,000 spindle hours and is still in active production Available from approximately week 46/2026 An inspection with the machine powered on can be arranged at any time.

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, Control: FANUC Series 32i Model B Swing over bed: 600 mm Max. turning diameter: 400 mm Max. turning length: 650 mm Spindle bore: D65 mm X-axis travel: 275 mm Z-axis travel: 700 mm C-axis: 0.001 degree Rapid traverses (X / Z): 15 / 24 m/min Spindle speed: 5,000 rpm Drive power: 34 kW Torque: 325 Nm Tool stations: 12 (all stations driven) Tool holder: VDI40 Speed of driven tools: 6000 rpm Weight: approx. 5800 kg Dimensions (L x W x H): 2800 x 1750 x 2090 mm Equipments, accessories: - Programmable C-axis - Driven tool turret - Chip conveyor - Coolant system - Static tool holders - Driven tool holders - Tool setter / Tool measuring arm - D200 mm hydraulic 3 jaws chuck - Tailstock - Manuals Ijdezd Evcjpfx Aa Isic The machine is barely used and is in mint condition. Immediately available.

Condition: repair required (used), Year of construction: 2009, 5-axis CNC machining center – universal – Manufacturer: RÖDERS Machine model: RXP 800 DS Year of manufacture: 2009 TECHNICAL DATA Travels - X-axis (mm): 475 - Y-axis (mm): 600 - Z-axis (mm): 400 - A-axis (swivel table): +/- 95 - C-axis (rotary table): 360 EQUIPMENT FEATURES Iiodpfey Smvcjx Aa Iec + RC 4 automation + Chip conveyor

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Iedezavyfspfx Aa Ijic

Condition: used, Year of construction: 1997, machine/vehicle number: 11730, CNC control HEIDENHAIN, travel: X-axis 800 mm x Y-axis 600 mm x Z-axis 500 mm, swiveling range A-axis +20/-90 degrees, C-axis 360 degrees, max. spindle speed 18,000 rpm, automatic tool changer with 30 tool positions, rapid traverse 35 m/min, machine weight 7,000 kg, chip conveyor. Isdjy Sqglepfx Aa Ieic

Condition: refurbished (used), Year of construction: 2026, (3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to customer needs. Machine refurbished, grinding test in our warehouse is possible, CE certification, manuals, 12 months warranty also available Machines can be inspected in our warehouse in Gussago BS Google Map HERE INFO? . Machine Tools - Machine Tools Gussago (BS) - Italy Tel:  Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the workpiece to work which is given to them with the aid of a tool. Through-feed grinding or also through grinding and longitudinal grinding: parts to be machined proceed uninterruptedly with axial advancement through the grinding gap. Iiedsgmf Rnopfx Aa Isc Grinding wheel width: 500 Grinding wheel diameter: 610 CNC: 5 axis (new)

Condition: ready for operation (used), X-axis: 1080mm, y-axis: 710mm, z-axis: 710mm, speed range: 1-12,000/min, max. table load: 550kg, NC rotary table diameter integrated into the fixed table: 800mm, table dimensions: 1500x800mm, number of tool positions: 32, tool holder: SK 40 DIN 69872, connected load: 15kW, control system: Heidenhain TNC 430, operating hours: 63,619h, spindle hours: 22,552h, with controlled NC swivelling milling head B-axis, active cooling for the B-axis motor spindle, handwheel, operating mode 4, the hard drive drive amplifier was replaced in January 2025. An on-site inspection is possible. Isdpfjzadkrsx Aa Ijic

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand Iodpfex Hllxex Aa Ijic - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: used, MORI SEIKI SL-45MC-1500, 3-AXIS CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-45MC-1500 CONTROL FANUC 15T WITH FAPT, LED SCREEN CHUCK DIA 400mm SWING 670mm BETWEEN CENTRES 1700 mm SPINDLE BORE 120.0 mm SPINDLE SPEED 2,500 RPM, 4 SPEED GEARBOX Iisdpfeymmqbox Aa Ioc TURRET 12 STATIONS, DRIVEN TURRET RAPIDS X: 12,000 mm/min Z: 15,000 mm/min TAILSTOCK INCLUDED, PROGRAMMABLE PLUS NEW “SCHUNK” SMW QUICK CHANGE CHUCK (WORTH 20,000 GBP) C-AXIS AND DRIVEN TOOLS HYDRAULIC STEADY FULL SET OF MANUALS MIST COLLECTOR VERY GOOD RANGE OF TOOLING NEW SWARF CONVEYOR IN EXCELLENT WORKING ORDER

Condition: good (used), Year of construction: 1999, CNC lathe Mori Seiki SL-150SY – MSC-501 Manufacturer: Mori Seiki Co., Ltd., Japan Model: SL-150SY Serial number: 1077 Year of manufacture: 1999 Weight : Approximately 4.4 tons Control system Mori Seiki MSC-501 (Fanuc 18) CRT display with softkeys MDI / EDIT / AUTO modes Axis display: X, Z, C, Y, B Operating time power on 55000h Operating time approx.: 20000h Machine configuration CNC lathe with Y-axis C-axis on main spindle Subspindle (dual spindle configuration) Turret head, 12 positions Prepared for/equipped with powered tools Closed work zone Capacity: Max turning length: Max turning length 350 Max turning diameter: 300 normally, Ø170 if there are more tools on the turret Rod diameter: approx. Ø 45 mm Spindle speed main and sub spindle: up to approx. 5,000 rpm Driven tools: 4000 rpm Revolver: 12 stations Y-axis travel: approx. ±40–30 mm Spindle & clamping Hydraulic chucks (Kitagawa) Foot pedals: 4 pcs (separate control for main and counter spindle) Main spindle + counter spindle Iijdpfxezagqzj Aa Ijc Automatic transfer between spindles Media & systems Hydraulic unit Central lubrication Cooling system Chip conveyor Electrical data 3~ 200V 50Hz Installed power: 41 kVA Full load current: 119 A Spindle motor: 76 A Breaking capacity: 5 kA Control panel & operator interface Full keypad Feed/spindle override MPG handwheel Key switch and safety interlock Condition / Function Regularly serviced machine Control system in operation, operated until it was recently disconnected. The brake on the main spindle can get stuck when operating with powered tools. Other CE marked Made in Japan

Condition: used, Year of construction: 1983, travel distance X-axis: 10,540 mm, travel distance Y-axis: 5,875 mm, travel distance Z-axis: 1,002 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 5 m/min, feed length X-axis: 10,540 mm, feed length Y-axis: 5,875 mm, feed length Z-axis: 1,002 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 5 m/min, controller manufacturer: Fidia, controller model: Fidia CNC, workpiece length (max.): 9,750 mm, workpiece width (max.): 3,500 mm, workpiece height (max.): 3,250 mm, total height: 8,715 mm, total length: 23,700 mm, total width: 9,200 mm, table width: 3,500 mm, table length: 9,750 mm, table load: 20,000 kg, rotational speed (min.): 2,500 rpm, rotational speed (max.): 2,500 rpm, spindle speed (min.): 2,500 rpm, distance table to spindle center: 3,250 mm, spindle motor power: 90,000 W, number of spindles: 1, number of slots in tool magazine: 10, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, 🏭 Ingersoll Masterhead V/H – 5-Axis CNC Gantry Milling Machine / Double Column Machining Center 🏭 For sale is a heavy-duty 5-axis CNC gantry milling machine Ingersoll Masterhead V/H equipped with a powerful FIDIA CNC control. Perfect for heavy machining, tool & mold making, aerospace, energy industry, and machining of large steel and aluminum components. ✅ Massive double column construction ✅ Hydrostatic axes ✅ Automatic attachment changer (AAC) ✅ Large travel ranges ✅ Extensive equipment package ✅ Ideal for large-part machining 🔧 Technical Data Manufacturer: Ingersoll Model: Masterhead V/H Year: 1983 Control: FIDIA CNC Machine type: 5-Axis CNC Gantry Milling Machine 📏 Travels X-Axis: 10,540 mm Y-Axis: 5,875 mm Z-Axis: 1,002 mm W-Axis: 2,450 mm 🛠️ Table Table size: 9,750 x 3,500 mm Table load capacity: 20,000 kg per 1,000 mm table length ⚡ Spindle Spindle motor power: 90 kW Spindle speed: up to 2,500 rpm Spindle taper: ISO 60 📐 Machine Dimensions Distance between columns: 3,900 mm Vertical clearance: 3,250 mm 🧰 Equipment ✅ 5-axis machining ✅ 2-axis NC milling head ✅ Automatic attachment changer AAC ✅ 10-position head magazine ✅ Chip conveyor ✅ Coolant through spindle ✅ Hydrostatic X and Y axes ✅ Linear scales X/Y/Z/W ✅ Multiple milling heads and extension units ✅ Horizontal and vertical spindle units ✅ Long reach spindle unit 🚀 Ideal for 🔹 Heavy-duty machining 🔹 Large component machining 🔹 Tool & mold making Iijdpfx Aaoy Rm D Dj Ijc 🔹 Aerospace industry 🔹 Mechanical engineering 🔹 Steel fabrication 🔹 Energy sector 📍 Location: USA 👀 Inspection possible by appointment 📞 Further information available on request ⚠️ Subject to prior sale and errors excepted.

Condition: used, machine/vehicle number: 008362, X axis working area: 3200 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 32 Total number of tool changer positions: 22 Iiodpfxjx A Tl Aj Aa Ioc

Condition: used, machine/vehicle number: 008340, X axis working area: 4400 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 36 Iiodpey Nkpnofx Aa Iec Total number of tool changer positions: 30

Condition: used, machine/vehicle number: 008480, X axis working area: 4600 mm Iedpfey Edqkex Aa Ioic Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 5 axes Total number of drilling spindles: 31 Total number of tool changer positions: 58

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 132, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,100 mm, number of axes: 5, Equipment: CE marking, SECOND-HAND 5-AXIS CNC WORKING CENTER BACCI MOD. TWIN - Strokes: X = 3400 Y = 1500 Z = 1100 B = endless C = 400° - Type 4 head 7.5 kw Iodpfozclg Hjx Aa Ieic - 0-24.000 rpm - N. 2 tgv working tables - OSAI control - Enclosed cabin on 4 sides + roof - No. 2 Becker vacuum pumps 100 m³/h - Serial no. 132 - Year 2001 (CE rules)

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Iijdpoy H Ebtofx Aa Ijc Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

Condition: used, machine/vehicle number: 008184, X axis working area: 8185 mm Y axis working area: 1550 mm Isdpfjyxmv Njx Aa Ijic Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 006487, X axis working area: 3060 mm Y axis working area: 1240 mm Working Table: Flat table Main Electrospindle power: 8.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16 Iodpfxsn Rzcls Aa Isic

Condition: like new (used), Year of construction: 2012, Parts shown by hand not come. With machine come tool holders SK 40. X 600 mm; Y 430 mm, Z 460 mm; A 150 deg x 0.001;C 360 deg x 0.001 12.000 rpm, Iijdpfx Aelpcdwea Iec Heidenhain iTNC 530 , 40 tool places in changer SK 40.

Condition: excellent (used), Year of construction: 2011, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 5921, type of input current: three-phase, input voltage: 2,800 V, pressure: 6 bar, input current: 41 A, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, total height: 4,310 mm, total length: 7,310 mm, total width: 7,130 mm, input frequency: 50 Hz, We offer this excellent 5-axis CNC machining center, the CMS SINTESY 4323 MPT, designed for trimming plastic and laminate parts, manufactured in 2011. Manufacturer: CMS S.p.A. Iedpfxezcpkcs Aa Ioic Model: SINTESY 4323 MPT Year of manufacture: 2011 5 interpolated axes Linear axes: X-4300, Y-2300, Z-1200 Rotary axes: B +/- 120 deg, C +/- 240 deg Electrospindle: 7.5 kW Installed power: 28 kW Compressed air consumption: 400 nl/min Tool magazine: 12 positions Extendable tables Dustproof cabin – enclosed machine design. If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Iodpfow Idhmox Aa Ioic Number of controlled axes: 5 axes Total number of drilling spindles: 35 Total number of tool changer positions: 14