Used 4 Axis Machining Center for sale (82,984)

Condition: excellent (used), Year of construction: 2014, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - A/B Round- Axis re-placed - Manufacturer checked usedmachine Basic machine G350 AB Generation 0 Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Work area door, automatic Machine control HEIDENHAIN iTNC 530 Optimizing the machine kinematics with KinematicOpt Hodpfxeruqp Do Aaconu Collision monitoring DCM Collision (HEIDENHAIN) Tilting table unit (A'-axis) Rotary table with T-slots (B'-axis), Customized coupling system TK57 Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW Single disk-type tool magazine HSK-A 63 with 34 tool pockets Additional tool magazine TM99 HSK-A 63 with 99 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT A‘=-180°(BLUM) Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (38 bar, ICS) Compressed air feed through spindle center Changeable cutting fluid pressure increase Oil skimmer for cutting fluid care Air gun at the work area Flushing gun Rotary distributor in B'-axis rotary table Infrared touch probe m&h Remote machine diagnostics Warranty for Quality Checked Used Machine, 3 month

Condition: like new (used), Year of construction: 2018, operating hours: 2,350 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The used QUASER MV 184 C 4-axis vertical machining center is a medium-sized CNC vertical machining center featuring a cast iron structure and roller guideways for the table. Axis travels: X 1020 mm, Y 610 mm, Z 610 mm; table dimensions: 1200×600 mm, with a maximum load capacity of 500 kg. The machine is equipped with a continuous 4th axis TJR HR 255N with corresponding tailstock, as well as a precision-milled table with T-slots. Spindle: ISO-40 (DIN 69871) with 10,000 rpm (max power: 18 kW), spindle cooling via dedicated chiller, high-pressure through-spindle coolant, 30-position RANDOM-type tool changer with swing arm, RENISHAW TS 27 tool presetting device, wireless RENISHAW part probe, and belt-type chip conveyor. Year of manufacture: June 2017 (installed in 2018), equipped with FANUC MILL I CNC with color LCD, Manual Guide i software, remote handwheel, USB port, RS-232 serial interface, memory card slot, and FILTERMIST mist extraction unit. Hodjxf Nbrjpfx Aacsnu The machine is in PERFECT condition with only 2,350 cutting hours, and various tooling options are available as accessories.

Condition: used, Year of construction: 2023, Technical Data Working Area I.M.S. I.U. Working area X axis 5515 mm (217") Working area Y axis 1620 mm (63¾") Material passage Y 1900 mm (74¾") Material passage Z 250 mm (9¾") Workpiece length for pendulum processing 2600 + 2600 mm (102" + 102") Traverse speed of X-Y axes PRO-SPACE 56 m/min (184 ft/min); Traverse speed of X-Y axes PRO-SPEED 78 m/min (256 ft/min). *For further details, please refer to the corresponding machine layout. With the 5-axis motor, the Y working area increases to 1680 mm (66") for JQX motor, or 1720 mm (67½") for KS/KT motor. Max. loadable panel width during horizontal drilling, spindle oriented vertically only, with no middle reference stops. Installation Data I.M.S. I.U.: Installed power: 23 – 28.5 KVA Electrical specifications: 400 V, 50 Hz, 3 phases Air consumption: 450 Nl/min Compressed air consumption: 4500 m³/h (2650 CFM) Extraction air speed: 30 m/s Extraction port diameter: 250 mm (9.8") Noise level VSA* / LAV*: Drilling 72.2 dB(A) / 74.6 dB(A), Milling 74.3 dB(A) / 80.7 dB(A) Reference standard: EN ISO 11202:1995 *VSA = without load and without extraction *LAV = in operation, with extraction Location: Nattheim Hnsdpswb Trpsfx Aacju

Condition: good (used), Year of construction: 2008, 5-axis CNC machining center Manufacturer: Willemin Model: W 408 MT Year: 2008 Control: Fanuc Series 16i MB Max workpiece diameter: 32 mm Spindle speed: up to 30,000 rpm Spindle interface: HSK-E40 48-position tool changer 5 axes + gripper Travel distances: X 250 / Y 200 / Z 300 mm + Bar feeder LNS Hydrobar Express 332 + Coolant filtration system + Oil cooling / spindle cooling + High-pressure coolant (IKZ) Operating hours: approx. 75,000 hrs. Over the past years, more than €50,000 has been invested in the machine. Among others, the following parts were replaced/repaired: Main spindle - tool interface Spindle drawbar Tool changer gearbox Ball screws X/Y/Z/U axes Z-axis motor U-axis motor The machine has been regularly maintained and was fully integrated in production until recently. Hnsdpfx Asxdm Eroacsu

Condition: excellent (used), Year of construction: 2022, High-Performance Gantry Machining Center, 3-Axis Only 917 spindle hours (as of July 2025) Manufacturer: HEDELIUS Model: FORTE 65 Single Year of manufacture: 2022 Control unit: Heidenhain TNC 640 F Tool holder: SK40 Operating hours, approx. (as of July 2025): Spindle running time: 917 h Program running time: 1,119 h Machine powered on: 3,675 h TECHNICAL DETAILS: 3 axes Travel range, X, Y, Z axes: 1,320 mm, 650 mm, 600 mm Rapids X, Y, Z axes: 0-40, 40, 40 m/min Spindle power: 29 kW / 183 Nm Spindle speed: 50–14,000 rpm EQUIPMENT: ZeroClamp zero-point clamping system, 6/4-position Forte 65, 120 mm diameter IKZ internal coolant supply with 25 bar Inclined bed band filter system, 900 l LTA 3001 exhaust air filter (1,200 m³/h) Blow-off gun Rinsing gun Infrared receiver M&H 91.40 TNC 640 3D infrared touch probe M&H 25.50 Internal compressed air supply through main spindle via M-function (5 bar) 65-position tool magazine Fixed machine table Scraper-type chip conveyor Direct length measurement systems from Heidenhain Spindle chiller Automatic central lubrication for X, Y, Z axes Work area lighting Precision ground ball screws Control cabinet air-conditioning unit Spindle cooler Coolant supply, semicircular around spindle Original price over €250,000 Hodjw U Egdopfx Aacenu This used machine can be inspected under production conditions. All information without guarantee – sale subject to exclusion of any warranties or guarantees. Prior sale reserved.

Condition: used, Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,260 mm, travel distance Y-axis: 2,508 mm, travel distance Z-axis: 203 mm, Equipment: rotational speed infinitely variable, For sale: used AVID CNC / CNC Router Parts wood router. The spindle has a bearing defect but is still functional; otherwise, all components are fully operational. PC and CNC software are not included. Hnedowurtljpfx Aacju Offered configuration includes: 1 x Leg Kit (PRO CNC) (CRP813-00) size 4' x 8' 1 x Pepperl + Fuchs Proximity Sensor Kit    Sensor configuration: Homing/Limit, 6-sensor kit (for machines larger than 4'x4') 1 x 2.2 kW Plug and Play Spindle / VFD System 1 x Plug and Play NEMA 34 CNC Control System (CRP800-00E-8)    Cable configuration: (1) 20' and (3) 28' cables [recommended for 4'x8' or 5'x10' machines]    Additional Motor Drive: None [4-drive, standard] 1 x PRO4896 4' x 8' CNC Router Kit    Version Nema 34 compatible    Z-axis travel / gantry height 12" / 8"

Condition: good (used), Year of construction: 2006, Equipment: chip conveyor, Accessories: Approx. 40x SK-40 tool holders (without cutting tools) Hnsdpjxcpkzsfx Aacsu Operating hours: 32,379 h (as of July 9, 2024) Spindle running time: 15,674 h (as of July 9, 2024) Machine available from: October 21, 2025

Condition: used, Year of construction: 2007, x-travel 4000 mm y-travel 3000 mm z-travel 2200 mm control Siemens Sinumerik 840 D quill stroke 800 mm max. workpiece weight 20000 kg Hsdpfx Aaow Sfkkjcenu tool taper ISO 50 BIG PLUS DIN 69871 max. torque at the spindle 2346 Nm spindle diameter 160 mm total power requirement 65 kW weight of the machine ca. 50000 t dimensions of the machine ca. 12,8 x 11,8 x 5,7 m Work table - Clamping surface 2500 x 2000 mm - Table height above floor 800 mm Feed speed - x-axis 0.5 to 10000 mm/min - y-axis 0.5 to 10000 mm/min - Z-axis 0.5 to 10,000 mm/min - Rapid traverse (X/Y/Z) 25 / 25 / 25 m/min - Max. feed force (X/Y/Z) 28,000 / 27,000 / 28,000 N Spindle speeds in 1/min - Gear stage 1: 6 to 848 rpm - Gear stage 2: 850 to 3000 rpm Tool magazine: - 306 slots divided as follows: Number of slots max. length 700 mm: 54 Number of slots max. length 450 mm: 54 Number of slots max. length 300 mm: 63 Number of slots max. length 200 mm: 135 - Tool weight max. 35 kg - Tool diameter with free auxiliary slots max. 325 mm - Tool diameter without free secondary spaces max. 105 mm Accessories - Approx. 30 nos. SK 50 tool holders - 1 measuring probe - Coolant system/paper belt filter & chip conveyor - Cooler - Oil mist extraction - Fixators - Documentation

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Hnsdpfxsvvi Rfj Aacou

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Hnjdpjwz I Acefx Aacsu Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: like new (used), Year of construction: 2022, operating hours: 3,814 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 26 kVA, torque: 122 Nm, controller manufacturer: Haas, controller model: NGC, table width: 457 mm, table length: 1,321 mm, table load: 1,588 kg, distance table center to spindle nose: 742 mm, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Haas VF-4 with a 10k spindle, used in a production palletized setup of smaller parts in light materials, primarily aluminum, brass and plastics. Low hours, accident free. BT 40 Taper Tool changer type: Carousel Air required: 113 L/min at 6,9 bar Machine weight: 5316,0 kg Through-spindle coolant ready Programmable coolant spindle Hnodexlky Nopfx Aacju Chip auger

Condition: used, 4-Axis CNC Machining Center SCM CNC Tech Z 27 Working area: 2650 x 1240 mm Travel range X-Y: 2995 x 1385 mm Z-axis travel length: 200 mm Pass-through height: 180 mm TV work table Automatic tool changer for 8 tools Horizontal milling unit for milling and grooving (lock case unit) HSK tool holder automatic central lubrication Vector rotary axis 0 – 360 degrees Angle gearbox MIMATIC HSK 63 F Additional right stop with roller conveyor Laser device Year of manufacture: 2005 Machine is OPERATIONAL / from a small business – business closure Machine is in use and can be inspected at any time at the seller’s location Hnedpfx Aexg I Efeacsu Brokered on behalf of the customer Ex stock

Condition: good (used), Year of construction: 2000, 20000 rpm, tool measurement on table will come, Parts shown by hand not come. Hodpor Urm Sefx Aacsnu

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Hnsdpet Dmlfjfx Aacju Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Hsdpfovvi R Eox Aacjnu Storage location: Nattheim

Condition: used, Year of construction: 2016, - Heidenhain iTNC 530 SmarT.NC HSCI control - 40-position tool changer - Rotary table Ø 610 mm - Oil mist extraction - Internal coolant supply 40 bar - Hydraulic vice including riser - Centre clamp - Tool holders - Tool cabinet - Milling cutters - Magnetic plate - Solid CAM with iMachining, incl. postprocessor - Halmer optical presetting device - Spindle on-time: 3182 h - Year of construction: 2016 Specifications Working area: - Travel X-axis: 1100 mm - Travel Y-axis: 610 mm - Travel Z-axis: 610 mm - Travel B-axis: -30 / +120° - Travel C-axis: 0.001 x 360° - Rapid traverse X/Y/Z: 36 / 36 / 24 m/min - Feed rate: 1 - 7500 mm/min - Positioning accuracy: ± 0.005 mm - Repeatability: ± 0.003 mm - Guides X/Y/Z: Roller 35 / 35 / 45 mm Rotary table: - Rotary table Ø: 610 mm - Rotational speed: 50 rpm - Positioning accuracy: 15" - Workpiece weight: max. 500 kg - Spindle nose to table: 105 - 715 mm - T-slots in table: 5 - T-slot width: 18 mm H8 - T-slot spacing: 100 mm Spindle: - Speed: 14000 rpm - Torque: 160 Nm (40%) - Power: 29 kW (40%) - Spindle cooling: water-cooled Swivel head: - Rotational speed: 11 rpm - Positioning accuracy: 10" - Holding torque: max. 1320 Nm - Tool holder: HSK63 Tool changer: - Number of tools: 40 stations - Tool change time (tool to tool): 3 s - Max. tool weight: 7 kg - Max. tool diameter: 76 mm - Max. tool diameter with free adjacent slot: 150 mm - Max. tool length: 300 mm Machine: - Machine bed: cast iron - Central lubrication: R68 (ISO68) - Hydraulic oil: R32 (ISO32) - Compressed air: 3/8" 6-8 bar - Power supply: 400V / 100A / 70 kVA - Coolant tank: 120 l Hedpfx Aasvi Ndrecenu - Space requirement incl. chip conveyor (WxHxD): approx. 5260 x 2890 x 3300 mm - Machine weight: approx. 9000 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, feed length X-axis: 400 mm, feed length Y-axis: 240 mm, feed length Z-axis: 350 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, spindle speed (max.): 30,000 rpm, Mikron HSM 400U 5-Axis CNC (Graphite Mill) Year:2002 S/N: 107.87.00.024 Control: Heidenhain iTNC530 Spindle Taper: HSK-E40 Spindle Speed: 30,000 RPM Spindle Power: 13 kW (17 HP) ATC: 36-Station Automatic Tool Changer Travels: X: 15.723″ (400 mm) Y: 9.434″ (240 mm) Z: 13.758″ (350 mm) A-Axis: ±110° C-Axis: 360° / 0.001° Hsdpfow H Izpex Aacjnu Tooling System: System 3R Tooling Base (on Trunnion) 48-Station System 3R Tooling Carrousel Blum Laser Tool Measurement System Rapid Traverse Rate: 40 m/min (1,575 IPM) Repeatability: ±0.002 mm Max Workpiece Capacity: Ø230 mm × 350 mm Height Max Load: 25 kg Structure: Polymer Concrete Frame Cooling System: Full Liquid Cooling Machine Dimensions (L×W×H): 3,840 × 2,540 × 2,640 mm Weight: 6,700 kg

Condition: reconditioned (used), functionality: fully functional, X-axis travel (longitudinal axis) mm 6650 Y-axis travel (transversal axis) mm 800 Z-axis travel (vertical axis) mm 500 B-axis rotation (vertical-horizontal rotation) from 0° to 90° continuous Hnedpfx Ajxixyxoacou C-axis rotation (perpendicular to the work surface) from 0 to 360° continuous Maximum X-axis positioning speed 40 m/min Independent work zones 2 Clamp positioning: automatic Electrospindle power: 7 Kw Electrospindle speed: variable up to 20000 rpm Tool magazine capacity: 8+1 Dedicated blade magazine with 300 mm diameter

Condition: used, Year of construction: 2018, SCM Accord 25 FX CNC processing center (5-axis) Technical description Working area X and Y: 5.020 x 1.380 x 250mm Speed X-Y-Z m./min 60 (25) - 60 - 30 Table with bars 2 working fields Automatic lubrication Number of milling motor axes: 5 Milling power 11kW (PRISMA KT 5 axis) Inverter 15kW (600-18.000 r.p.m.) Left/right direction of spindle Liquid cooled Drilling unit: No Tool holder: HSK 63 Changer: Revolver 16 Number of vacuum pumps: 1 x 250 XILOG-MAESTRO SOFTWARE Hnsdpoud Sdlofx Aaceu Maestro APPS MSL Connector PanelMac Interface software Automatic table (FX MATIX) TECPAD remote control Panel lifters Z-Laser Model LP-HFD-10-520F-S-80 Type LP-HFD Dust extraction 1x 250 + 1 x 100mm 4.400 m³/h Weight 5.400 kg Price excl. VAT and excl. advertisement cost MachineSeeker (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle aenderungen und Irrtuemer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2016, Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, Hnedowq A Rgjpfx Aacju C axis , 360 degrees, Heidenhain TNC530, Spindle Speed 20000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 60 tools, swarf conveyor.

Condition: excellent (used), Year of construction: 2012, For sale is a 5-axis machining center from Axa, model VHC 3-XTS. The machine is fully operational and functional, previously used in model making and mold construction—no heavy-duty machining. History: 2018: Spindle overhaul 2018: New spindle drive motor 2020: Spindle overhauled 2023: New ball screw for the Z-axis 2024: Geometry inspection performed Technical Data: Year of manufacture: 2012 Control: Heidenhain TNC 530 Heros 5 Total operating hours: 39,190 h X-axis: 2,600 mm Y-axis: 900 mm Hsdpfxjwg E N Rs Aacenu Z-axis: 900 mm C-axis: 360° B-axis: ±100° NC rotary table: RTA 4L-800 Measuring system: direct Spindle mount: SK 40 Tool changer: magazine chain, 36 tools Positioning accuracy: ±0.0075 mm Repeatability: ±0.005 mm Max. spindle speed: increased to 12,000 rpm Approval for operation mode 3 is available Machine length: 6,000 mm Machine width: 4,100 mm Machine height: 3,500 mm Required installation area: approx. 10 x 5 x 3.5 m Weight: approx. 26 t Features include: hinged belt chip conveyor, 2x hand rinsing guns, electronic handwheel, 3D measuring probe OMP 40 with Renishaw receiver Transport and loading can be organized Europe-wide upon request and at additional cost. All prices are subject to VAT. Viewing possible by appointment. Please contact us—the team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase & sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Year of construction: 2012, operating hours: 5,007 h, condition: used, functionality: fully functional, machine/vehicle number: 111, CNC machining center for natural stone, ceramics, and engineered stone 4 axes Tilting table 90° bevel gearbox for cutting 90° bevel gearbox for grinding Rotary magazine for 32 tools Hnjdpfx Ajxbfw Uoacsu T'CAD / T'CAM software Marble grinding plate Z-axis: 400 mm X-axis: approx. 3100 mm Y-axis: approx. 160 mm Vacuum suction cups for workpiece clamping Laser for workpiece positioning Laser for positioning the vacuum suction cups SK-40 tool holder Includes extensive tooling package

Condition: as good as new (ex-display), Year of construction: 2023, Control : Heidenhain TNC 640 Travels X : 1,020 mm Travels Y : 520 mm Travels Z : 610 mm Clamping surface (L x B) : 1,160 x 520 Table load : 750 kg Spindle Speed : 15,000 rpm direct Hsdpfot Dizvjx Aacsnu Tool holder: SK40 (BigPlus) DIN69872 In general Tool changer : 30-stations Machine bed : Meehanite cast Repetitive accuracy : 0.008 mm Equipment Chip conveyor Coolant supply Elect. handwheel high pressure coolant

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: S216405501002, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful motor spindle HSK-A 100 with 9,000 rpm - lasermeasurement system BLUM LC-DIGILOG - 46 tools in the system _____ Basic machine G550 access-SERIE Travel path of the X-axis 800.0 mm Travel path of the Y'-axis 950.0 mm Travel path of the Z-axis 1020.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Stainless-steel internal work area enclosure Fluid cabinet doors SIEMENS SINUMERIK 840D sl with GROB4Pilot access Swivel axis calibration GSC Classic Hand-held controller HT 2 (SIEMENS) SINUMERIK MDynamics technology package - milling Tilting table unit (A'-axis) Rotary table with T-slots (B'-axis) Motorized spindle HSK-A 100, 9,000 rpm, 470/575 Nm, 54/65 kW *spindle new replaced GROB spindle diagnostics GSD Hedperul U Ajfx Aacenu Compact double disk-type magazine HSK-A 100 with 46 tool pockets Tool cleaning device Electromechanical tool breakage detection device Blum Lasermeasuringsystem LC50-DIGILOG, A‘=0° High-pressure cutting fluid system (5-40 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Compressed air cleaner bar for safety screen in work area door Radio touch probe OMP 60 (RENISHAW) machine status lamp 12 month warranty

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens, controller model: 840 D SL, Spindle Speed : 15.000 rpm Power : 40 kW Tool holder : HSK-A 63 Tool changer : 32 stations Working area Traverse path X : 550 mm Travel Y : 400 mm Travel Z : 400 mm B-axis Swivel angle : +/- 120 Swivel axis resolution : 0.0001° Repeat accuracy : +/- 5'' Speed : 50 rpm C-axis Faceplate : 280 mm Repeatability : +/- 5'' Speed : 200 rpm Drive : Torque motor Hsdpfxetpm R Is Aaconu general Tool change time : 0.9 sec Rapid traverse (X/Y/Z) : 75 m/min Axis acceleration (Y/Y/Z) : 1.0 - 1.5 - 2.0 g Equipment Coolant supply : Internal cooling 30 bar Coolant cleaning : Compact paper belt filter KF 150 Oil mist extraction : Extraction unit with air cleaner Workpiece measurement : Blum measuring probe Tool measurement : Renishaw Software : Kinematics Fit