Used 3 Way Valve 1 for sale (103,913)

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,800 kg, Multi-pallet fork Gsdpfx Ahoyzvmcjmjbr ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 3,800 kg Sideshift Opening range 660-2,910 mm Width 1,960 mm Forks 1,200 mm ID OS1947

Condition: used, functionality: fully functional, load capacity: 3,600 kg, construction width: 1,700 mm, Multi-pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Technical condition: good Gedpoulpzfofx Ahmobr Description: Capacity 3600 kg ISO 2A (41 cm) Forks 1150 mm Width 1700 mm Opening range 560-2410 mm ID OS717

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks Gjdpetx Nwnefx Ahmebr * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: new, maximum load weight: 48,300 kg, overall weight: 71,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available for immediate and short-term delivery, on our website. Extract from the equipment features. Full specification available on request. GOOSENECK: * Gooseneck with integrated 1-axle running gear (pendulum axle) in detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic coupling connected with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front taper of approx. 60° * Saddle load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside on the front bulkhead of the gooseneck with lifting arm * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings in the outer frame of the front chassis, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings at the transition between chassis and loading platform (LC 10,600 daN) * On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminium tailboard, approx. 400 mm high, anodized finish * 3.5-inch king pin * TPMS tire pressure monitoring system compliant with ECE R 141 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with 1 lid, mounted on top of the gooseneck on the right in the direction of travel near the aluminium drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING AREA: * Lowbed with external main beams, designed as a telescopic loading platform in low-profile layout with front extension including a fixed approx. 50 mm hardwood floor Gbsdpfx Aeyhkqnehmjr * Length x width approx. 8,000 mm x 2,740 mm * Mechanical pin-lug coupling from the lowbed to the chassis to exchange the platform or install extension beams * 1 locking position every approx. 500 mm in the extension section * 4 pairs of recessed lashing rings arranged lengthwise on the loading area, distributed along the outer frame/main beam (LC 10,000 daN) * 1 lashing ring per side on the outside of the rear crossmember (LC 10,000 daN) * Foldable widening sections, approx. 230 mm per side (WITHOUT timber planks) * Detachable widening planks, steel-edged * Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the main beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the main beam for mounting screw-type M24 rings (LC 8,000 daN) * 2 pairs of M24 screw rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * Pendulum axle, all axles hydro-mechanically forced steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off cocks and pre-insertion facility for securing in raised position * Final paint on axles in 2 coats of 2-pack paint, solid colour DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable-control, with axle alig

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: Gjdpfx Aev Hqnaohmebr KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, 1 set of soft top jaws, chuck jaws RÖHM Type: Duro 160/3 Suitable for 3-jaw wedge bar chucks Chuck diameter: 160 / 180 mm Jaw length: 84 mm Jaw width: 39 mm Height without step: 95 mm Height with step: 99 mm Slot width: 8 mm Step width: 18 mm Hole spacing: 32 mm Holes: Ø 9 mm (for M8 bolts) - 1 set of steel top jaws - used, machined jaw set Gsdpfjxpqz Uox Ahmebr Base jaw dimensions L x W x H: approx. 84 x 39 x 99 mm Weight: approx. kg Multiple sets of top jaws available under stock number 62056 Top jaws compatible with RÖHM, FORKARDT, SCHUNK, or SMW

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures Gedpfsvylhbox Ahmebr GDR3 H12 Motor ZBR100 B4 B050

Condition: new, empty load weight: 2,050 kg, maximum load weight: 650 kg, overall weight: 2,700 kg, loading space length: 5,600 mm, loading space width: 2,170 mm, loading space height: 2,100 mm, tire size: 195/55R10C, Large toilet trailer with aesthetic furnishings. A toilet trailer is often essential for a party, town festival, street party, company celebration or other outdoor event. We have set ourselves the task of helping here and have developed inexpensive car trailers with toilets. A visually appealing interior design is important to us for a toilet trailer in addition to good equipment. The car trailer is divided into two rooms for men and women. The lighting, heating and flow heater are operated via the power connection. Wall-mounted toilets with built-in cisterns and concealed pipes create a pleasant ambience. There is a fresh water supply and the gray water disposal runs via a sewer. The entrance to the portable toilet is a wide staircase that can be folded down and has lifting aids. The rest of the side wall is then folded upwards as weather protection. Swing-out handrails provide safety. Two entrance doors protect against wind and weather. The staircase is illuminated with an LED strip. Gjdjuh Rzqspfx Ahmebr The standard equipment in the ladies' area consists of three lockable cubicles with wall-hung toilet bowls, built-in cistern and toilet roll holder. The actual room has a heater, drain for internal cleaning, PVC on the floor, washbasin with vanity unit and instantaneous water heater, mirror, LED lighting, roof vent with mosquito net and blackout blind, light switch and socket. There is only one cabin in the men's area, which is equipped in the same way as the cabin on the ladies' side. The basic equipment is also the same. There are also four wall-mounted urinals with touchless sensors. The general equipment of the box trailer with toilet equipment is a 50mm insulated sandwich body in silver on the outside, white on the inside, insulated floor, supply flaps on the left for the technical equipment, power socket for 230V, distribution box with FI, fresh water access, outlet for drain pipe, four stable crank supports, very stable frame and V-drawbar hot-dip galvanized. Further technical details can be found below. We offer 100km/h shock absorbers, anti-theft devices and drawbar boxes as accessories for our toilet vehicles.

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam C&B, including 1 welding head with 3 wires. Welding range: ø6.5 to ø11 m. Expandable up to ø13 m. 1 system. Already disassembled without power (currently likely without PSU, but a PSU may be available). Gbodpfx Asyt Rmgehmer Inspection welcome north of Flensburg. B2B sale only.

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sek. total power requirement 3 kW weight of the machine ca. 95 kg turning speeds 2800 U/min Standard equipment: - Removable dust catcher Gbedpfx Aeyv Nw Rjhmjr - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, band speed 33 m/s grinding band dimension 75 x 2000 mm total power requirement 3 kW weight of the machine ca. 75 kg turning speeds 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment Gbsdpfeyv Nvgox Ahmsr - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm)

Condition: excellent (used), Tool milling machine DECKEL FP 1, three-axis digital readout TNC 113, from educational institution - CE marking - Travel X / Y / Z 300x160x340 mm - Heidenhain TNC 113 / plug-in control - Spindle speed range 40 - 2000 rpm - Infinitely variable feed in all three axes - Rapid traverse in all three axes - Vertical head adjustable by 100 mm - Vertical-horizontal milling facility - Tool holder ISO 40 - Drive power 1.5 / 1.9 kW - Fixed angle table - Chip tray Gjdpsyln Irofx Ahmsbr - Coolant system - Work light - Documentation Dimensions: LxWxH 1.3x1.2x1.7 m / Weight: 950 kg Errors and omissions excepted

Condition: used, Year of construction: 1988, spindle diameter 90 mm x-travel 2000 mm y-travel 1250 mm z-travel 1250 mm spindle turning speed range 8-1600 U/min spindle stroke 720 mm Feed 1-2500 mm/U Gbsdsyutqkopfx Ahmsr weight of the machine ca. 9,1 t 31881-07/9 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), A filling machine Ammann used in the dairy industry is available. Cup diameter: 95mm, cup height: 122mm. Including filling heads and various accessories. Documentation available. An on-site inspection is possible. Gbjdpfx Ahjxuvpzemer

Condition: good (used), functionality: fully functional, Three proportional valves from Bosch 0811 300 053 Gbodpfsy Sh Hcox Ahmor 0811 402 012 0811 402 006 Price per unit: 250 EUR If you buy all three: 650 EUR

Year of construction: 2025, condition: used, Packaging machines, consisting of: Godowk Dv Djpfx Ahmobr 1x Rotary arm wrapper with top sheet applicator, type: B200E, manufacturer: TechnoWrapp 1x Ring wrapper, type: A800-4, manufacturer: TechnoWrapp 1x Rotary arm wrapper, type: CW 400E, manufacturer: CombiPack 1x Baler, type: BVP-950-HL1, manufacturer: Willems, Indion Technical details, equipment, photos, and operating time are shown in the attached description.

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Gsdpfxstylpij Ahmsbr

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Gsdpfx Ahotylpcemebr

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 63 kVA, input current: 2 A, type of output current: AC, output voltage: 110 V, Equipment: documentation/manual, 63kVA transformer for sale 3x400V -> 1x110V Manufacturer: Trafó-Print Kft. Type: TZ 63 000 Power: 63kVA Gbodpfx Ahsw Ev Ihomer Primary: 3x400V Secondary: 1x110V

Condition: excellent (used), Used boltless shelving units Upright type S3 Height: approx. 446 cm (can also be shortened) Depth: 50 cm Longitudinal beams type S1 Length: 150 cm Double-section shelves: 90 cm + 60 cm Price applies to 11 uprights and 100 shelves, making 15m of racking Gedoxxdkuspfx Ahmobr Multiple sets available Delivery possible

Condition: excellent (used), PISTON PUMP KING 3/1 HIGH-FLOX INOX GRACO, ON GROUND SUPPORT REF. 243748 - Brand: GRACO - Reference: 243748 - Paint circulating, high flow rate - General industry, automotive - Second hand product totally revised - 1 year warranty. Gbsdpfoh Tx I Hox Ahmer - VAT not included

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 1,200 mm, total width: 700 mm, total height: 2,000 mm, shelf length: 1,200 mm, load capacity per storage section: 140 kg, frame height: 2,000 mm, Equipment: double-sided, Used shelving. Modular, boltless shelving unit in very good technical condition. Galvanized shelf unit warehouse number: #77 METALSISTEM Dimensions relevant to the price offer: - Frame/upright height up to 200 cm (we also have 250 cm height available) - Depth: 70 cm - Shelf width: 120 cm - Maximum shelf load: 150 kg with 4 shelves per section - For racks with fewer than 3 sections, shelf load capacity is 100 kg per shelf - Shelf adjustment every 5 cm The given price is for 1 add-on set to attach to the next section: 1 set includes: 1 upright/frame/side + 4 shelves To create a free-standing rack, 2 sets are required Section dimensions: Width – 120 cm Height – 200 cm Depth – 70 cm Gjdpfxjvnzmce Ahmjbr Shelf dimensions: Width – 120 cm Depth – 70 cm Approx. 2100 meters of this racking in stock Please browse our other listings for warehouse shelving

Condition: excellent (used), Joystickbox for Mitutoyo CMM with CMMC 1, 1S, Gbodpfsgynw Dsx Ahmer 2; 2S; 3; 3S; 6 and UC200/400

Year of construction: 2017, condition: used, functionality: fully functional, Gemü 55415D19510 2/2-Way angle seat globe piston valve, pneumatically operated with threaded cast copper. PST 4,8-7 bar 180 C PS 12 bar 4 for sale. 1 piece/55 EUR. Good working condition. Please check out our other listings as well. Gjdpfx Ast D Rfishmjbr

Condition: used, functionality: fully functional, Gemü 5700388-01 2/2-Way angle seat globe piston valve, pneumatically operated with threaded cast copper. - PST 4-8 bar Gbjdpfjt D Rgmjx Ahmor - Temp 180 C - PB 13 bar 3 for sale. 1 piece/55 EUR. Good working condition. Please check out our other listings as well.