Used 3 Stage Centrifugal Pump for sale (67,910)

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: BOMBA FLOWSERVE 36371.05, overall weight: 2,060 kg, total length: 3,580 mm, total width: 1,900 mm, total height: 2,300 mm, volume flow: 720 m³/h, operating pressure: 14 bar, final pressure: 22 bar, input voltage: 460 V, input frequency: 60 Hz, input current: 440 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,785 rpm, warranty duration: 1 months, protection type (IP code): IP56, New 400 HP Flowserve centrifugal pump; flow rate of 720 m3/h; model 10x6 IMP 564mm. Dodpfey Tcczox Aa Djwa

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Axial Pump, hydraulic pump -Type: APVC-13 -Shaft: Ø 16 x 40 mm -Bolt circle: Ø 64 mm M6 -Dimensions: 245/200/H250 mm -Weight: 9.3 kg Dsdpfeyzfh Aox Aa Djwa

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again Djdpfsyug R Rex Aa Dswa enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: good (used), Busch Vacuum Pump Model 630 370 CFM Djdpfx Aewa Nzqsa Dewa

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Dwedpfsxv Apwex Aa Doa Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 87 kW (118.29 HP), type of input current: three-phase, type of cooling: air, overall weight: 781 kg, input voltage: 400 V, total width: 2,130 mm, total length: 2,280 mm, total height: 1,330 mm, warranty duration: 12 months, heating capacity: 93.3 kW (126.85 HP), AIRCOOLED CHILLER/HEAT PUMP CARRIER 30RQ 090RAPI1984 87 KW/93.3 KW Cooling capacity: 87.0 kW / 24.74 tons (12/7 — 35°C) Heating capacity: 93.3 kW / 26.53 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos AC25-125, expansion vessel. Dimensions: 2.28x2.13x1.33 m Weight: 781 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Dwjdjzldz Tepfx Aa Doa Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 1,736 kW (2,360.30 HP), type of input current: three-phase, type of cooling: water, overall weight: 9,850 kg, input voltage: 400 V, total width: 2,130 mm, total length: 4,830 mm, total height: 1,600 mm, warranty duration: 12 months, heating capacity: 1,964 kW (2,670.29 HP), Watercooled chiller/Heat pump CIAT LWHE 4628E0003- 1736 kW/ 1964 kW Cooling capacity: 1736 kW / 493.62 tons (12/7 — 30/35°C) Heating capacity: 1964 kW / 558.45 tons (40/45 —10/7°C) Year of manufacture: 2021 Options: Economizer. High efficiency. Heat pump. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Compressors: 2 pcs. Carlyle 06TVW819SW3D.A42 (screw compressor with stepless control between 15% and 100%) Type of refrigerant: R134a Dimensions: 4.83x2.13x1.6 m. Weight: 9850 kg. Working hours: 0/0 h. Dwedpfx Aowy Nnkea Dsa Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 364 kW (494.90 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,100 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,450 mm, total height: 2,420 mm, warranty duration: 12 months, heating capacity: 160 kW (217.54 HP), Aircooled chiller/Heat pump YORK YCPB 420 364 kW/406 kW Cooling capacity: 364 kW / 103.5 tons (12/7 — 35°C) Heating capacity: 406 kW / 115.44 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss PSH105A4EPA (scroll) + 2 pcs. Danfoss PSH065A4EPA (scroll) Type of refrigerant: R454B Number of fans: 7 pcs. (Frequency inverter) Dimensions: 4.45x2.25x2.42 m. Weight: 3100 kg. Working hours: 107/80/98/58 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Dwodey Rknmjpfx Aa Dsa LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 366 kW (497.62 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,203 kg, input voltage: 400 V, total width: 2,260 mm, total length: 5,300 mm, total height: 2,410 mm, warranty duration: 12 months, heating capacity: 349.9 kW (475.73 HP), Aircooled chiller/Heat pump LENNOX GAH370DP2M 366 kW/349.9 kW Cooling capacity: 366 kW / 104.07 tons (12/7 — 35°C) Heating capacity: 349.9 kW / 99.49 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Danfoss DSF270A4AAA (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (EC-fans) Dimensions: 5.3x2.26x2.41 m. Weight: 3203 kg. Working hours: 63/60/76/92/95/92 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Dwjdpjx Rbw Eefx Aa Dja Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 137 kW (186.27 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,795 kg, input voltage: 400 V, total width: 2,020 mm, total length: 3,800 mm, total height: 1,970 mm, warranty duration: 12 months, heating capacity: 154 kW (209.38 HP), Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Dsdpfx Ajy H Dhlja Djwa Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 26 kW (35.35 HP), type of input current: three-phase, type of cooling: air, overall weight: 358 kg, input voltage: 400 V, total width: 1,150 mm, total length: 1,300 mm, total height: 1,600 mm, warranty duration: 12 months, heating capacity: 30 kW (40.79 HP), Aircooled Chiller/Heat pump Blue Box Epsilon Echos DK RF HP 26 kW Cooling capacity: 26 kW (12/7 — 35°C) Heating capacity: 30 kW (40/45 — 7°C) Year of manufacture: 2018 Options: Heat pump Heat exchanger: Plate Dsdpfx Aasx Ux T Ss Djwa Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Copeland (scroll) Number of fans: 1 pcs. high-pressure Dimensions: 1.30 x 1.15 x 1.60 m Weight: 358 kg Working hours: 3 h Condition: Excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 396 kW (538.41 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,740 kg, input voltage: 400 V, total width: 890 mm, total length: 2,650 mm, total height: 1,800 mm, warranty duration: 12 months, heating capacity: 439 kW (596.87 HP), Watercooled chiller/Heat pump Climaveneta Prototipo PDC NX WN 1204 396 kW/439 kW Cooling capacity: 396 kW / 112.6 tons (12/7 — 35°C) Heating capacity: 439 kW / 124.8 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZP385KCE-TWD-522 (scroll) Type of refrigerant: R410a Dimensions: 2.65x0.89x1.8 m Weight: 1740 kg Working hours: 146/86/136/81 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Djdpfx Aaowbd Tdj Dowa LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 311 kW (422.84 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,940 kg, input voltage: 400 V, total width: 2,230 mm, total length: 6,120 mm, total height: 2,150 mm, warranty duration: 12 months, heating capacity: 327 kW (444.60 HP), Aircooled chiller/Heat pump CLIMAVENETA NX N Y/CA 1104T 311 kW/327 kW Cooling capacity: 311 kW / 88.43 tons (12/7 — 35°C) Heating capacity: 327 kW / 92.98 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer GSU80385VLB4-2 (scroll) + 2 pcs. Bitzer GSU80295VLB4-2 (scroll) Type of refrigerant: R410А Number of fans: 8 pcs. (EC-fans) Hydraulic module: 2 pcs. water pump Grundfos MGE112MC-2FF215-JA-400 (Frequency inverter) Dimensions: 6.12x2.23x2.15 m Weight: 3940 kg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS Dwsdjyzzviopfx Aa Dea The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 123 kW (167.23 HP), type of input current: three-phase, type of cooling: water, overall weight: 760 kg, input voltage: 400 V, total width: 1,000 mm, total length: 1,700 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 136.9 kW (186.13 HP), Watercooled chiller/Heat pump Climaveneta NX WN 0402 123 kW/136.9 kW Cooling capacity: 123 kW / 34.97 tons (12/7 — 35°C) Heating capacity: 136.9 kW / 38.93 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Dwedpfx Asv Tyd Roa Dja Compressors: 1 pcs. Bitzer GSU80295VLB4-2 (scroll) + 1 pcs. Bitzer GSU60235VLB4-2 (scroll) Type of refrigerant: R410a Dimensions: 1.7x1x2 m Weight: 760 kg Working hours: 17/16 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 70.25 kW (95.51 HP), type of input current: three-phase, type of cooling: air, overall weight: 720 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,400 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 73.12 kW (99.42 HP), Aircooled chiller/Heat pump Climaveneta NR N LN CA 0262P 70.25 kW/73.12 kW Cooling capacity: 70.25 kW / 19.98 tons (12/7 — 35°C) Heating capacity: 73.12 kW / 20.79 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Dwsdpfx Aaev Rp Its Dja Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP154KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 6 pcs. Dimensions: 2.4x1.2x2 m. Weight: 720 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 44.9 kW (61.05 HP), type of input current: three-phase, type of cooling: air, overall weight: 610 kg, input voltage: 400 V, total width: 1,200 mm, total length: 1,900 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 53.1 kW (72.20 HP), Aircooled chiller/Heat pump Climaveneta NX N G06 LN K 0202P 44.9 kW/53.1 kW Cooling capacity: 44.9 kW / 12.77 tons (12/7 — 35°C) Heating capacity: 53.1 kW / 15.1 tons (40/45 —7°C) Djdpfx Aaev Tnh Ds Djwa Year of manufacture: 2021 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer GSU60120VLB4-2 (scroll) Type of refrigerant: R454B Number of fans: 4 pcs. Dimensions: 1.9x1.2x2 m. Weight: 610 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 13.5 kW (18.35 HP), type of input current: three-phase, type of cooling: air, overall weight: 150 kg, input voltage: 400 V, total width: 920 mm, total length: 430 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 15.3 kW (20.80 HP), Aircooled chiller/Heat pump CLIMAVENETA MEHP IB G07 15Y 13.5 kW/15.3 kW Cooling capacity: 13.5 kW / 3.84 tons (12/7 — 35°C) Heating capacity: 15.3 kW / 4.35 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB28FCQMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-10-F02, expansion vessel. Dimensions: 0.43x0.92x1.4 m Weight: 150 kg Working hours: 83 h. Dwodeyxfc Ijpfx Aa Dja Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 308.3 kW (419.17 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,899 kg, input voltage: 400 V, total width: 2,200 mm, total length: 4,600 mm, total height: 2,650 mm, warranty duration: 12 months, heating capacity: 333 kW (452.75 HP), Aircooled chiller/Heat pump Systemair SYSCROLL.330.AIR 308.3/333 kW Cooling capacity: 308,3 kW (12/7 — 35°C) Heating capacity: 333 kW (40/45 —7°C) Year of manufacture: 2018 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Copeland (scroll) Dwodpfjxxkflox Aa Dea Number of fans: 8 pcs. Type of refrigerant: R410A Dimensions: 4.6 x 2.2 x 2.65 m Weight: 2899 kg Condition: Excellent, Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 26.5 kW (36.03 HP), type of input current: three-phase, type of cooling: air, overall weight: 365 kg, input voltage: 400 V, total width: 1,150 mm, total length: 1,950 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 31 kW (42.15 HP), Aircooled chiller/Heat pump KAMPMANN WSAN XSi 14.1 26.5 kW/31 kW Cooling capacity: 26.5 kW / 7.53 tons (12/7 — 35°C) Heating capacity: 31 kW / 8.81 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric LNB65FAEMC (rotary, inverter) Type of refrigerant: R410a Number of fans: 1 pcs. ZKSN-750-8-10 Hydraulic module: 1 pcs. water pump WILO BAC40-125-0,75 Dimensions: 1.95x1.15x1.4 m. Weight: 365 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Alternative names used in European markets: Kaltwassersatz (DE), Dwjdpfx Aswbdhnsa Dea Gruppo frigorifero industriale (IT), Groupe froid industriel (FR), Chiller wody lodowej (PL), Agregat frigorific (RO), Enfriadora industrial (ES). This unit is listed in English for international buyers.

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Dodpfx Aeyi H Eqsa Djwa Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Djdpfey U U Tuex Aa Dewa Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2015, cooling capacity: 23.15 kW (31.48 HP), type of input current: three-phase, type of cooling: air, overall weight: 180 kg, input voltage: 400 V, total width: 400 mm, total length: 1,450 mm, total height: 1,540 mm, heating capacity: 23.5 kW (31.95 HP), Aircooled chiller/Heat pump SYSTEMAIR 24 AIR EVO PH 23.15 kW/23.5 kW Cooling capacity: 23.15 kW / 6.58 tons (12/7 — 35°C) Heating capacity: 23.5 kW / 6.68 tons (40/45 —7°C) Year of manufacture: 2015 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. (scroll, inverter) Type of refrigerant: R410a Dwedpfxoy Ryqwj Aa Doa Number of fans: 2 pcs. (inverter) Hydraulic module: 1 pcs. water pump Wilo para 25/1-12 t1 (Frequency inverter) Dimensions: 1.45x0.4x1.54 m. Weight: 180 kg. Needs to be configured

Condition: used, Year of construction: 2021, cooling capacity: 6.3 kW (8.57 HP), type of cooling: air, overall weight: 99 kg, total width: 400 mm, total length: 1,160 mm, total height: 950 mm, heating capacity: 6.8 kW (9.25 HP), Aircooled chiller/Heat pump CLIVET WSAN-YMi 31 6.3 kW / 6.8 kW Cooling capacity: 6.3 kW / 1.79 tons (12/7 — 35°C) Heating capacity: 6.8 kW / 1.93 tons (40/45 —7°C) Year of manufacture: 2021 Version: 250 V, 1 Phase, 50 Hz Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi SVB220FLGMC-L (scroll, inverter) Type of refrigerant: R32 Number of fans: 1 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo RS15/6-RKC M, expansion vessel. Dimensions: 1.16x0.4x0.95 m Dedpfx Aasym Sk Te Dewa Weight: 99 kg Working hours: 928 h. Needs to be configured

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 50.5 kW (68.66 HP), type of input current: three-phase, type of cooling: air, overall weight: 604 kg, input voltage: 400 V, total width: 780 mm, total length: 2,360 mm, total height: 1,680 mm, warranty duration: 6 months, heating capacity: 50.3 kW (68.39 HP), Aircooled chiller/Heat pump DAIKIN EWYQ050CAWP H 50.5 kW / 50.3 kW Cooling capacity: 50.5 kW / 14.36 tons (12/7 — 35°C) Heating capacity: 50.3 kW / 14.3 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Daikin JT1GCVDKYRBA (scroll, inverter) + 2 pcs. Daikin JT170G-KYEBA (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump GRUNDFOS CM10-2-X-R-A-E-AQQEF-A-A-N, expansion vessel. Dimensions: 2.36x0.78x1.68 m Weight: 604 kg Working hours: 32957/32957/32957/32957 h. Condition: Used, tested, fully operational Dodow Hzyxjpfx Aa Djwa CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 54.3 kW (73.83 HP), type of input current: three-phase, type of cooling: air, overall weight: 575 kg, input voltage: 400 V, total width: 1,210 mm, total length: 1,410 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 45.6 kW (62.00 HP), Aircooled chiller/Heat pump BLUEBOX GEYSER 2 MT 52 54.3 kW / 45.6 kW Cooling capacity: 54.3 kW / 15.44 tons (12/7 — 35°C) Heating capacity: 45.6 kW / 12.97 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP91KCE-TFD-422 (scroll) Type of refrigerant: R410а Djdpfx Aasyt H S Eo Dewa Number of fans: 1 pcs. (Frequency inverter) Dimensions: 1.41х1.21х2.4 m Weight: 575 kg Working hours: 26200/28300 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.