CNC Turning- and Milling Center

MORI SEIKI NTX1000

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Options: Chip conveyor Hpsdjxykzcepfx Ad Eja Renishaw 3-jaw chuck x 2 Hainbuch chuck x 2 Tooling

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE MAX ROTATING DIAMETER: 660 mm MAX TURNING LENGTH: 1495 mm MAX TURNING DIAMETER: 660 mm BAR CAPACITY: 65 - 65 mm SPINDLE: 35-5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35-5000 rpm; 18,5 kW; 254 mm HEAD: CAPTO C6 ; -30°+195° ; 15-12000 rpm; 18,5 kW X-AXIS TRAVEL: 580 mm X2-AXIS TRAVEL: 150 mm Y-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 1545 mm Z2-AXIS TRAVEL: 1490 mm B-AXIS TRAVEL: 1550 mm RAPID FEEDS X-Y-Z: 38 - 26 - 38 m/min TURRET HEAD: 9 POS TOOL MAGAZINE: CHAIN-TYPE ; 80 POS HIGH PRESSURE COOLANT: 18 Bar CONTROL UNIT: MAZATROL MATRIX WEIGHT: 11800 Kg OVERALL DIMENSIONS: 5090 x 3270 x 2830 mm ACCESSORIES: SWARF CONVEYOR ; Hedpfx Ajw Ey R Hjd Espa PAPER FILTER ; TOOL SETTER

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,597 h, functionality: fully functional, turning length: 424 mm, turning diameter: 370 mm, bar diameter (max.): 65 mm, turning diameter over bed slide: 370 mm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning diameter: 370 mm Turning length: 424 mm Swing diameter: 370 mm X1-axis travel: 380 mm X2-axis travel: 155 mm Z1-axis travel: 460 + 155 mm Z2-axis travel: 610 mm y-axis travel: ±105 mm B-axis travel: ±120° Bar diameter: 65 mm Spindle 1 Maximum speed: 6,000 rpm Number of speed ranges: 2 (winding switch) Spindle mounting: JIS A2-5 Spindle bore: 61 mm C-axis resolution: 0.0001° Spindle diameter (front bearing): 100 mm Maximum torque (40% DC/continuous): 223/158 Nm Spindle 2 Maximum speed: 6,000 rpm Number of speed ranges: 1 Spindle mounting: 80 g6 flat nose Spindle bore: 38 mm C-axis resolution: 0.0001° Spindle diameter (front bearing): 70 mm Maximum torque (15% DC/continuous): 49/22 Nm Tool Spindle Number of tool stations: 1 Tool shank type: C5 Spindle diameter (front bearing): 65 mm Tool change time (tool to tool): 1.2 s Maximum tool diameter with adjacent positions occupied: 70 mm Maximum tool diameter with adjacent positions free: 130 mm Maximum tool length: 250 mm Maximum tool length (over 70 mm diameter): 210 mm Maximum tool weight: 5 kg Minimum indexing increment for B-axis: 0.0001° Maximum spindle speed: 12,000 rpm Maximum torque (15% DC/continuous): 49/22 Nm Turret 2 Number of tool stations: 10 Maximum shank diameter for boring bars: max. 32 mm Feed Drives Rapid traverse X-axis (tool spindle): 40,000 mm/min Rapid traverse Y-axis (tool spindle): 40,000 mm/min Rapid traverse Z1-axis (tool spindle): 50,000 mm/min Rapid traverse X2-axis (lower turret): 30,000 mm/min Rapid traverse Z2-axis (lower turret): 30,000 mm/min Rapid traverse A-axis (workpiece unloading unit): 36,000 mm/min Rapid traverse B-axis: 100 rpm Rapid traverse C-axis: 250 rpm Tool Magazine Tool magazine: chain magazine, 76 positions Control Control: MSX-711-IV Mori Seiki Control system: MAPPS MACHINE DETAILS Power-on hours: 75,992 h Total power consumption: 45 kW Weight and Dimensions Machine weight: approx. 10.5 t Space required: approx. 2.71 × 2.43 × 2.40 m Operating Hours Head 1 Operating time: 48,606 h Machining time: 8,597 h Operating Hours Head 2 Operating time: 48,382 h Machining time: 2,664 h Hpedpjxf A Apjfx Ad Eea EQUIPMENT Renishaw HPRA Blum Laser Control Direct measuring system X, Y, Z, B SMW Autoblok KSZ-MB-040-Z140 collet chuck Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / HPC via milling spindle, 7-stage up to 70 bar Chip conveyor ConSep 2000

Condition: excellent (used), Year of construction: 2010, turning length: 800 mm, turning diameter: 430 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 12,000 rpm, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø Ø430 Turn-mill spindle X-axis travel mm: 455 Y-axis travel mm: ±105 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12.000 Drive power kW: 9/5.5 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp Hedpfx Asu Afizsd Eepa High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76.482 Spindle 1: 14.010 Spindle 2: 4.306 Rated power kVA: 48 Basic machine dimensions / weight 4.170 Length mm: 2.500 Width mm: 2.495 Height mm: 8.500

Condition: new, The new vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: without Hpedpfsttzxrex Ad Eea Technical data: 2.7 kW 3 x 230/400 V 50 Hz 1500 rpm Oil return suction in non-return valve housing Gas ballast Incl. level switch Final pressure: 0.1 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Year of construction: 1992, condition: good (used), Control system conversion 2022 to CYBELEC VisiTouch Pac pressure 200 t folding length 3050 mm column width 2550 mm Hpsdpfx Aeim R N Hjd Eja Control system CYBELEC VisiTouch Pac ram stroke 524 mm Machine weight approx. 17.000 kg Equipment: - Control system conversion 2023 to CYBELEC VisiTouch Pac - controlled axes: Y1, Y2, X, R, crowning - hydraulic punch clamping - hydraulic die clamping - 4-stage pneumatic die displacement

Year of construction: 1975, condition: excellent (used), Dimeter of the drum: 525 mm Depth of the drum: 620 mm Hjdpofgd S Nefx Ad Espa Volume: 170 Ltr. Capacity: max. 150 Kg. *with Time-controller 0-60 min*

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 Hodegabu Ujpfx Ad Espa with counterholder and base plate.

Condition: used, Year of construction: 2023, In the market for a Top of the Range Miyano? Then have a look at this one! 18 months old and just over 1000 hours on the clock…it is as new! Still on site where it can be seen under power. The following is from Miyano’s Spec sheet: The Miyano ABX-64SYY – is a Top of the range, twin spindle, twin turrets with Y-axis on each turret. The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time. High rigidity and high torque with 40 Nm driven tools. The use of rigid 40 Nm driven tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions, all driven, handle complex machining just like a machining centre. This machine also features the optional parts conveyor, Hainbuch collet chucks on both spindles, high pressure coolant, probing and a steady rest that’s mounted on the lower turret. Machining Capacity and Chuck System Maximum Machining Diameter of Bar Work SP1/SP2 ø64/51mm Collet Chuck SP1/SP2 Stationary Power Chuck SP1/SP2 6″/6″ hydraulic drive Standard Turning Length 125mm Spindle Spindle Nose SP1/SP2 A2-8/A2-6 Spindle motor(30min./Cont.) SP1 15/11kW SP2 7.5/5.5kW Spindle Speed Range SP1 50 – 5,000min-1 40 – 4,000min-1 SP2 50 – 5,000min-1 Turrets(Upper L/R Turrets & Lower Turret) Type of Turret 2 x 12 Station Turret Shank Height of Square Turning Tool □20mm Diameter of Drill Shank ø40mm ø20mm ø25mm Slide Stroke X1, X2 axis 190mm Z1/Z2 axis 550mm/721mm Y1, Y2 axis ±40mm Zs axis 756mm Rapid Traverse Rate X1, X2 axis 16m/min Z1/Z2 axis 30/20m/min Y1, Y2 axis 12m/min Zs axis 30m/min Driven Tools Maximum Number of Revolving Tools 24 Rotation speed of Driven Tools 60 – 6,000min-1 Driven Tool Motor AC Servo 4.5kW Machine Dimensions Machine Height 2,222mm Floor Space 3,290×2,204mm Machine Weight 10,900kg Name of the machine: Miyano ABX-64SYY Hpsdsw I D Duopfx Ad Esa

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Hsdpou S Ahqjfx Ad Espa Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: